Development of a capillary electrophoretic method for the separation of diastereoisomers of a new human immunodeficiency virus protease inhibitor

A capillary electrophoretic (CE) method was developed for the separation of diastereoisomers of a new human immunodeficiency virus (HIV) protease inhibitor TMC114. In total 16 isomers of this drug have been synthesized (eight pairs of enantiomers). We succeeded in the separation of the eight diastereoisomers, but no enantiomers could be separated. Because of the high similarity and water-insolubility of these isomers, the separation is a real challenge. Different CE modes were tried out: capillary zone electrophoresis (CZE), nonaqueous capillary electrophoresis (NACE), micellar electrokinetic capillary chromatography (MEKC), and microemulsion electrokinetic capillary chromatography (MEEKC). Only MEEKC offered resolution of these compounds.     

Structure and photochemistry of 18-diazo-1,4,7,10,13,16-hexaoxacyclononadeca-17,19-dione and its sodium and potassium complexes. Control of the ground-state conformation of 2-diazo-1,3-dicarbonyl fragment via host-guest complexation

[reaction: see text] The macrocyclic 18-diazo-1,4,7,10,13,16-hexaoxacyclononadeca-17,19-dione (3-diazo-2,4-dioxo-19-crown-6, 1) readily forms complexes with potassium (2, stability constant in methanol is K(K+) = 229 +/- 25 M(-1)) and sodium ions (3, K(Na+) = 84.2 +/- 7.9 M(-1) in methanol). According to B3LYP/6-31G+(d,p) calculations and temperature-dependent 1H NMR spectroscopy, the predominant conformation of 1 has a Z,Z arrangement of the diazo and carbonyl groups. The X-ray crystal structure analysis showed that the potassium complex (2) has the same Z,Z arrangement, while the sodium analogue (2) exists in conformation with Z,E geometry of the diazodicarbonyl moiety. Direct 254 nm photolysis of diazo compounds 1-3 in methanol results in the formation of 3-methoxy-2,4-dioxo-19-crown-6 (5), the product of the insertion of corresponding alpha,alpha'-dicarbonylcarbene into the O-H bond of the solvent. The triplet-sensitized photolysis of diazomalonates 1-3 produces 2,4-dioxo-19-crown-6 (6), which is apparently formed via the triplet state of the intervening carbene.     

Physico-chemical characterization of nanofiltration membranes.

This study presents a methodology for an in-depth characterization of six representative commercial nanofiltration membranes. Laboratory-made polyethersulfone membranes are included for reference. Besides the physical characterization [molecular weight cut-off (MWCO), surface charge, roughness and hydrophobicity], the membranes are also studied for their chemical composition [attenuated total reflectance Fourier spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS)] and porosity [positron annihilation spectroscopy (PAS)]. The chemical characterization indicates that all membranes are composed of at least two different layers. The presence of an additional third layer is proved and studied for membranes with a polyamide top layer. PAS experiments, in combination with FIB (focused ion beam) images, show that these membranes also have a thinner and a less porous skin layer (upper part of the top layer). In the skin layer, two different pore sizes are observed for all commercial membranes: a pore size of 1.25-1.55 angstroms as well as a pore size of 3.20-3.95 angstroms (both depending on the membrane type). Thus, the pore size distribution in nanofiltration membranes is bimodal, in contrast to the generally accepted log-normal distribution. Although the pore sizes are rather similar for all commercial membranes, their pore volume fraction and hence their porosity differ significantly.     

A series of neutral radical CpNi(dithiolene). complexes

The heteroleptic neutral radical dithiolene complexes CpNi(dmit)., CpNi(dsit). and CpNi(dmid).(dmit=1,3-dithiole-2-thione-4,5-dithiolate; dsit=1,3-dithiole-2-thione-4,5-diselenolate; dmid=1,3-dithiole-2-one-4,5-dithiolate) are obtained from the reaction of (Cp2Ni)BF4 with either (n-Bu4N)[Ni(dmit)2] and (n-Bu4N)[Ni(dmid)2] or PhSb(dmit) and PhSb(dsit), respectively. The three complexes reduce reversibly to the corresponding Ni(II) anions and oxidize reversibly to the cationic state. As deduced from DFT calculations performed on CpNi(dmit)., the SOMO of these complexes is essentially localized on the dithiolene moiety with little metal contribution. CpNi(dsit). is isostructural with CpNi(dmit). and crystallizes in the monoclinic system, space group P2(1). In the solid-state structures of both CpNi(dmit). and CpNi(dsit)., molecules interact through a three-dimensional set of intermolecular interactions mediated by short SS, SeSe and SSe contacts, as confirmed from the temperature and field dependence of the magnetic susceptibility by the observation of an antiferromagnetic ground state below T(Neel)=27 K in CpNi(dmit)., 18 K in CpNi(dsit).. Finally, CpNi(dmid). crystallizes in the orthorhombic system, space group Pnma. Molecules organize into uniform chains through the stacking of the dmid moieties in a sigma-type face-to-face overlap.     

Investigation of the formation process of MCs+-molecular ions during sputtering

In secondary ion mass spectrometry, the detection of MCs+ clusters (with M an element of the specimen) under a Cs bombardment is frequently used for the quantification of major elements. Despite some very good results obtained by this method, some problems still remain. In order to gain some more insight into these problems, the formation mechanism of the MCs+ clusters is investigated using a Monte Carlo model. It is shown that the majority of the constituent particles of the formed clusters are initially first or second neighbor atoms at the surface and that the velocity distribution of the MCs+ clusters becomes broader and peaked at higher velocities with increasing surface binding energy of the M atom. In addition, it is demonstrated that the interaction potential between the M and Cs+ particle has no influence on the velocity distribution of the MCs+ clusters. On the other hand, the cluster formation probability, defined as the probability that a sputtered M and Cs+ particle will form a MCs+ cluster, is extremely sensitive to this interaction potential. It is also shown that the cluster formation probability decreases with increasing surface binding energy. Finally, a good correspondence is obtained between the calculated and experimental velocity distributions of MCs+ clusters sputtered from different monoatomic materials. As a consequence, the Monte Carlo model and the discussed results can be validated.     

Crystallization and second harmonic generation in thermally poled niobium borophosphate glasses

Crystallization of glasses with compositions (1−x)(0.95 NaPO₃+0.05 Na₂B₄O₇)+xNb₂O₅, x=0.4, 0.43, 0.45, 0.48 was investigated by differential scanning calorimetry and X-ray powder diffraction. Crystallization of two phases was observed in the glasses with x=0.43-0.48. First phase is a sodium niobate with the structure of tetragonal tungsten bronze () and second phase is Na₄Nb₈P₄O₃₂ (). The crystallization of sodium niobate is correlated with increasing of nonlinear optical efficiency reported for thermally poled glasses with x>0.4. The results of Raman spectroscopy show the formation of three-dimensional (3D) niobium oxide framework in the glasses with increase of niobium concentration. This framework is supposed to have tetragonal tungsten bronze structure and to be responsible for nonlinear optical properties of the glass. Second harmonic generation signals of as prepared and crystallized glass after thermal poling are compared. The nucleation and crystallization do not improve the NLO properties of the glasses under study.     

Ab initio studies of a water layer at transition metal surfaces

This paper presents a detailed study of a water adlayer adsorbed on Pt(111) and Rh(111) surfaces using periodic density functional theory methods. The interaction between the metal surface and the water molecules is assessed from molecular dynamics simulation data and single point electronic structure calculations of selected configurations. It is argued that the electron bands around the Fermi level of the metal substrate extend over the water adlayer. As a consequence in the presence of the water layer the surface as a whole still maintains its metallic conductivity-a result of a crucial importance for understanding the process of electron transfer through the water/metal interface and electrochemical reactions in particular. Our results also indicate that there exists a weak bond between the hydrogen of the water and the Rh metal atoms as opposed to the widespread (classical) models based on purely repulsive interaction. This suggests that the commonly used classical interactions potentials adopted for large scale molecular dynamics simulations of water/metal interfaces may need revision. Two adsorption models of water on transition metals with the OH bonds pointing towards or away of the surface are also examined. It is shown that due to the very close values of their adsorption energies one should consider the real structure of water on the surface as a mixture of these simple "up" and "down" models. A model for the structure of the adsorbed water layer on Rh(111) is proposed in terms of statistical averages from molecular dynamics simulations.     

Metabonomics: the use of electrospray mass spectrometry coupled to reversed-phase liquid chromatography shows potential for the screening of rat urine in drug development

The application of liquid chromatography/mass spectrometry (LC/MS) followed by principal components analysis (PCA) has been successfully applied to the screening of rat urine following the administration of three candidate pharmaceuticals. With this methodology it was possible to differentiate the control samples from the dosed samples and to identify the components of the mass spectrum responsible for the separation. These data clearly show that LC/MS is a viable alternative, or complementary, technique to proton NMR for metabonomics applications in drug discovery and development.     

Amidinoethylation—a new reaction—IV : The amidinoethylation of alcohols: a facile synthesis of 3-alkoxy-N,N'-substituted-propanamidines

The amidinoethylation of alcohols takes place by the addition of sodium alkoxides 2 (R¹ = Me, Et) to the CC double bond of a variety of N,N'-substituted-propenamidines 1 (Method A). This illustrates the activation of the CC double bond by the conjugated amidine function and provides a new class of Michael acceptors for alcohols. However, this activation is poorer than with other nucleophiles or Michael acceptors. The amidinoethylation makes available 3-alkoxy-N,N'-substituted-amidines not easily accessible by other classical methods. However, it is demonstrated that the general N,N'-substituted-amidine synthesis via the nitrilium salts can also apply to nitrile compounds having an alkoxygroup present on the molecule (method B). Since the cyanoethylation of alcohols (4) is a very fast and facile reaction the method B is the preferred strategy for the synthesis of 3-alkoxy-N,N'-substituted-propanamidines 3.