Preparation of USY zeolite VOx supported catalysts from V(AcAc)3 and NH4VO3. Catalytic properties for the dehydrogenation of n-butane in oxygen-free atmosphere

The preparation of different samples of vanadia supported on ultrastable zeolite (VO(x)/USY) is discussed. The samples were prepared in order to obtain highly dispersed V-species, avoiding the formation of crystalline vanadia and the destruction of the zeolite framework. Two methods were employed for preparing VO(x)/USY samples: an organic route using V(AcAc)3 and an inorganic route using NH4VO3. The characterization of the samples was performed with XRD, TPR, NH3-TPD, and N2 isotherms. From these results it is concluded that when VO(x) is supported on the surface of USY from acidic aqueous solution of ammonium metavanadate, the destruction of the zeolite framework is accomplished. For higher pH values in the impregnating solution, undesired V2O5 is formed on the USY surface. On the other hand, VO(x)/USY prepared from the organic precursor shows no destruction of the USY structure. In addition, highly dispersed VO(x) are formed, though for relatively high V loadings (6%) an obstruction of the zeolite windows takes place. The samples are tested as catalysts for gas phase dehydrogenation of n-butane to olefins. The catalysts prepared from NH4VO3 are almost inactive for the reaction. On the other hand, both samples prepared from V(AcAc)3 present initial conversion levels in the 8-12% range. However, the selectivity depends on the V loading, the catalysts with 6% loading being the most selective (75%). The catalytic patterns of the samples (activity and selectivity) are in agreement with the physicochemical features of the VO(x)/USY surface.     

Reactions of thiosemicarbazones derived from beta-keto amides and beta-keto esters with Zn(II) and Cd(II) acetates: influence of metal, substitution, reagent ratio and temperature on metal-induced cyclization

Zinc(II) and cadmium(II) acetates were reacted in methanol under various experimental conditions with thiosemicarbazones derived from beta-keto amides or beta-keto esters (HTSC). Some of these reactions afforded thiosemicarbazonate complexes [M(TSC)2] with IR and NMR spectra compatible with N,S-coordination, but most gave complexes [ML2], where HL is a substituted 2,5-dihydro-5-oxo-1H-pyrazole-1-carbothioamide resulting from cyclization of the HTSC. Some of these pyrazolonates and two of the HL ligands were studied by X-ray diffractometry, and their structures are discussed. Surprisingly, the reactions of zinc(II) acetate with HTSC in 1:1 mol ratio usually gave a third, previously unreported type of complex with a dideprotonated ligand, [Zn(L-H)], which was also formed when [ZnL2] and Zn(OAc)2 interacted at room temperature in 1:1 mol ratio. These L-H complexes are highly insoluble in all common solvents, which hinders their characterization but suggests that they are polymeric in nature.     

Synthesis and acid-base properties of (1H-benzimidazol-2-yl-methyl)phosphonate (Bimp2-). Evidence for intramolecular hydrogen-bond formation in aqueous solution between (N-1)H and the phosphonate group

The synthesis of (1H-benzimidazol-2-yl-methyl)phosphonic acid, H2(Bimp)+/-, is described: 2-chloromethylbenzimidazole was reacted with ethylchloroformate to give 1-carboethoxy-2-chloromethylbenzimidazole which was treated with trimethyl phosphite and after hydrolysis with aqueous HBr H2(Bimp)+/- was obtained. In H2(Bimp)+/- one proton is at the N-3 site and the other at the phosphonate group; both acidity constants were determined in aqueous solution by potentiometric pH titrations (25 degrees C; I = 0.1 M, NaNO3) and this furnished the pKa values of 5.37 +/- 0.02 and 7.41 +/- 0.02, respectively. The acidity constant for the release of the primary proton from the P(O)(OH)2 group of H3(Bimp)+ was estimated: pKa = 1.5 +/- 0.2. Moreover, Bimp2- can be further deprotonated at its neutral (N-1/N-3)H site to give the benzimidazolate residue, but this reaction occurs only in strongly alkaline solution (KOH); application of the H_ scale developed by G. Yagil (J. Phys. Chem., 1967, 71, 1034) together with UV spectrophotometric measurements gave pKa = 14.65 +/- 0.12. Comparisons with acidity constants taken from the literature show that this latter pKa value is far too large and this allows the conclusion that an intramolecular hydrogen bond is formed between the (N-1/N-3)H site and the phosphonate group of Bimp2-; the formation degree of this hydrogen-bonded isomer is estimated to be 98 +/- 2%. The general relevance of this and the other results are shortly discussed and the species distribution for the Bimp system in dependence on pH is provided.     

Coupled-column liquid chromatography method with photochemically induced derivatization for the direct determination of benzoylureas in vegetables

The coupled-column (LC-LC) system, consisting of a first column packed with internal surface reversed phase (ISRP) (50 x 4.6mm ID) and a Chrompack C18 (100 x 4.6 mm ID) as second column, allowed the simultaneous determination of five benzoylurea insecticides in dichloromethane (CH2Cl2) extracts of vegetable samples without any clean-up step. This system was combined with a photochemically induced fluorescence (PIF) post-column derivatization in order to provide strongly fluorescent photoproducts from the non-fluorescent benzoylureas. Limits of detection ranged from 0.21 to 0.98 microg L(-1) of pesticide (equivalent to 0.14-0.65 microg kg(-1) in vegetable samples) and limits of determination ranged from 4.0 to 10.0 microg L(-1) (equivalent to 2.7-6.7 microg kg(-1)). Linearity of the method was established between 2 and 1800 microg L(-1), depending upon the compound. Validation of the total method was performed by randomly analyzing recoveries of four vegetable samples (aubergine, cucumber, green bean, and tomato) spiked at two levels of concentration (10.0 and 33.3 microg kg(-1)). The combination of the LC-LC system with PIF detection provides a sensitive, selective, and rapid method for the determination of pesticides in vegetable samples at levels lower than the maximum residue levels (MRLs) established for these compounds by Spanish legislation.     

Cycloaddition reaction of 2-azadienes derived from beta-amino acids with electron-rich and electron-deficient alkenes and carbonyl compounds. Synthesis of pyridine and 1,3-oxazine derivatives

Functionalized keto-enamines 6 were obtained by nucleophilic addition of enol ethers to the imine moiety of 2-azadienes derived from dehydroaspartic esters 4. Reactions of 2-azadiene 4c containing three electron-withdrawing substituents (CO(2)R) with enol ethers 5 in the presence of lithium perchlorate led to the formation of tetrahydropyridine derivatives 7 in a regio- and stereoselective fashion. 2H-[1,3]-oxazines 10 and pyridine derivatives 12 and 13 were obtained by heterocycloaddition reactions of electron-poor azadienes 4d-g containing two electron-withdrawing substituents (4-O(2)N-C(6)H(4), CO(2)R) in positions 1 and 4 with carbonyl derivatives (ethyl glyoxalate 9a and diethyl ketomalonate 9b) and the electron-deficient olefin tetracyanoethylene 11.     

Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Conformation of glycomimetics in the free and protein-bound state: structural and binding features of the C-glycosyl analogue of the core trisaccharide alpha-D-Man-(1 --> 3)-[alpha-D-Man-(1 --> 6)]-D-Man

The conformational properties of the C-glycosyl analogue of the core trisaccharide alpha-D-Man-(1 --> 3)-[alpha-D-Man-(1 --> 6)]-D-Man in solution have been carefully analyzed by a combination of NMR spectroscopy and time-averaged restrained molecular dynamics. It has been found that both the alpha-1,3- and the alpha-1,6-glycosidic linkages show a major conformational averaging. Unusual Phi ca. 60 degrees orientations for both Phi torsion angles are found. Moreover, a major conformational distinction between the natural compound and the glycomimetic affects to the behavior of the omega(16) torsion angle around the alpha-1 --> 6-linkage. Despite this increased flexibility, the C-glycosyl analogue is recognized by three mannose binding lectins, as shown by NMR (line broadening, TR-NOE, and STD) and surface plasmon resonance (SPR) methods. Moreover, a process of conformational selection takes place, so that these lectins probably bind the glycomimetic similarly to the way they recognize the natural analogue. Depending upon the architecture and extension of the binding site of the lectin, loss or gain of binding affinity with respect to the natural analogue is found.     

The Antiepileptic Lamotrigine and Its Analogues: Comparative Theoretical Electronic Properties

Electronic properties of lamotrigine (LTG) and two analogues (A1 and A2) are compared through MOPAC-AM1 calculations. Two stable conformers of LTG are calculated to exist in agreement with X-ray crystallography. In the three compounds and the two conformers for each of them, the more favorable protonation sites are N₂ and N₄; these should then be the sites appropriate for interaction with a receptor, and group valence reinforces the supposition. The molecular electrostatic potentials show that a region between the two chlorine atoms in LTG could be the site for an electrostatic interaction with a corresponding site in the receptor. The fluorine atom in A1 would play an equivalent role. A simple model for LTG-receptor interaction is proposed.     

Spectrophotometric study of bismuth with N-(2-acetamido)iminodiacetic acid (ADA): Determination of bismuth in pharmaceutical formulations

A new method for the Spectrophotometric determination of bismuth using N-(2-acetamido)iminodiacetic acid as complexometric agent is proposed. The complex is formed in a wide pH range, 5.5–7.5, and has a maximum absorption at 265 nm. Beer's law is obeyed in the interval 3.8–17.9 μg of bismuth(III)/ml, with a minimum photometric error of 2.3. The molar absorptivity is 9.1 × 10³ liters/cm mol. The stoichiometry of the reaction takes place in the metal-to-ligand ratio 1:2. The interferences produced by the more common ions are studied. The method has been successfully applied to the determination of bismuth in pharmaceutical formulations.