Structure and physical properties of ternary rare-earth cobalt bismuth intermetallics (RE)12Co5Bi (RE = Y, Gd, Tb, Dy, Ho, Er, Tm)

The rare-earth intermetallic compounds (RE)12Co5Bi (RE = Y, Gd, Tb, Dy, Ho, Er, Tm) were prepared by arc-melting and annealing at 600 degrees C. These compounds extend the previously known (RE)6M2+xX1-x (M = Co, Ni; X = Ga, In, Sn, Pb) series with the Ho6Co2Ga-type structure to X = Bi. The crystal structure of Ho12Co5Bi was refined by the Rietveld method from powder X-ray diffraction data obtained using synchrotron radiation (Pearson symbol oI36, orthorhombic, space group Immm, Z = 2, a = 9.37598(14) A, b = 9.37871(14) A, c = 9.85465(13) A). Unlike other Ho6Co2Ga-type compounds, the 2a site in Ho12Co5Bi is exclusively occupied by Co atoms. Four-probe electrical resistivity measurements on sintered polycrystalline samples of (RE)12Co5Bi indicated metallic behavior. Magnetic measurements revealed behavior ranging from frequency-dependent maxima in the ac susceptibility for Y12Co5Bi to possible ferrimagnetic ordering for Gd12Co5Bi to antiferromagnetic ordering with metamagnetic transitions for the remaining compounds. As confirmed by band structure calculations using Y12Co5Bi as a model compound, Y-Y and Y-Co interactions are the most important bonding components, but matrix effects are likely responsible for anomalously short Co-Co contacts in the structure.     

Highly diastereoselective cyanation of methyl ketimines obtained from (R)-glyceraldehyde

[reaction: see text] Addition of trimethylsilyl cyanide to ketimines derived from (R)-2,2-dimethyl-1,3-dioxolan-4-yl methyl ketone to generate a quaternary stereocenter has been achieved with high yields and excellent diastereoselectivity. The stereoselectivity was found to be temperature and solvent dependent. The beta-hydroxy-alpha-amino nitrile of syn configuration was the major compound in kinetically controlled reactions, whereas the anti stereoisomer was obtained in excess in thermodynamically controlled reactions. Double stereodifferentiation under kinetic control conditions was successful, and the cyanation reaction occurred with complete syn diastereoselectivity using the matched pair. The versatility of the resulting amino nitrile as a synthetic intermediate was tested by performing the synthesis of orthogonally protected (R)-(2-aminomethyl)alanine.     

Application of matrix solid-phase dispersion to the determination of a new generation of fungicides in fruits and vegetables

A method based on matrix solid-phase dispersion (MSPD) and gas chromatography to determine eight fungicides in fruits and vegetables is described. Fungicide residues were identified and quantified using nitrogen-phosphorus detection and electron-capture detection connected in parallel and confirmed by mass spectrometric detection. The method required 0.5 g of sample, C18 bonded silica as dispersant sorbent, silica as clean-up sorbent and ethyl acetate as eluting solvent. Recoveries from spiked orange, apple, tomato, artichoke, carrot and courgette samples ranged from 62 to 102% and relative standard deviations were less than 15% in the concentration range 0.05-10 mg kg(-1). Detection and quantitation limits ranged 3-30 microg kg(-1) and 10-100 microg kg(-1), respectively, with linear calibration curves up to 10 mg kg(-1). The analytical characteristics of MSPD compared very favourably with the results of a classical multiresidue method, which uses ethyl acetate and anhydrous sodium sulphate for the extraction.     

Asymmetric synthesis of 2H-azirines derived from phosphine oxides using solid-supported amines. Ring opening of azirines with carboxylic acids

A simple and efficient asymmetric synthesis of 2H-azirine-2-phosphine oxides 3 is described. The key step is a solid-phase bound achiral or chiral amine-mediated Neber reaction of beta-ketoxime tosylates derived from phosphine oxides 1. Reaction of 2H-azirines 3 and 11 with carboxylic acids 4 gives phosphorylated ketamides 5 and 12. Ring closure of ketamides 5 and 12 with triphenylphosphine and hexachloroethane in the presence of triethylamine leads to the formation of phosphorylated oxazoles 8 and 13.     

Synthesis of pyrazine-phosphonates and -phosphine oxides from 2H-azirines or oximes

[reaction: see text] Tetrasubstituted pyrazines containing two phosphonate groups 2 in positions 2 and 5 and trisubstituted pyrazines containing a phosphonate 5 or a phosphine oxide group 7 in position 2 are obtained by thermal treatment of 2H-azirine-2-phosphonates 1 and -phosphine oxides 6. These pyrazines can also be prepared from beta-ketoxime tosylates 9 and 10 or from oxime derived from phosphine oxide 11.     

Computer-assisted choice of discrete spacers for anionic isotachophoresis separations

In isotachophoresis (ITP), the sample constituents migrate, depending on their concentrations in the loaded sample, either in fully developed zones or in the boundary layers between the zones of constituents of the corresponding effective mobilities. The latter (spike) migration mode is analytically beneficial in selective detections of trace analytes, especially, when appropriately chosen discrete spacers minimize detection interferences due to matrix constituents. To facilitate a search for suitable mixtures of discrete spacers, a two-step calculation procedure was developed in this work. Using a pool of discrete spacers consisting of 42 anionic and zwitterionic constituents, this procedure was shown effective in the anionic ITP separations performed at pH = 6.5-10.0. Besides the predictions of the migration orders, it was helpful in identifying the spacing constituents that could cause resolution problems due to an uncertainty with which pH of the leading electrolyte solution is known. The ionic mobility and pKa data, taken for the spacing constituents from the literature and the ones obtained from the ITP experiments carried out in this work, were used in the calculations performed in a context with the choice of spacers. Although the data obtained from the ITP experiments provided better results, small uncertainties with which they were acquired (attributable to fluctuations in the experimental conditions) set practical limits in the calculation based choice of multi-component mixtures of the spacing constituents.     

Preparation of trout liver microsomes for iron speciation in P-450 enzymes by AE–FPLC with ICP–(ORS)MS detection

Cytochromes P-450 are members of a superfamily of hemoproteins involved in the oxidative metabolism of various physiological and xenobiotic compounds in eukaryotes and prokaryotes. The multiplicity of this group of enzymes has been widely studied by chromatographic techniques, mainly high-performance liquid chromatography (HPLC). Because these enzymes are membrane-bound proteins, sample preparation for chromatographic separation of P-450 enzymes requires a solubilization step. The sample-preparation procedures are critical, because detergents affect not only the efficiency of protein solubilization but also their further chromatographic resolution. Trout liver microsomes have been taken here as a model sample to investigate iron speciation in cytochrome P-450. Trouts were treated intraperitoneally with -naphthoflavone, a potent inducer of some P-450 enzymes, and a microsomal suspension containing 7.4±0.1 nmol mL^–1 P-450 enzymes was obtained by ultracentrifugation. Lubrol PX was selected as detergent for solubilization, resulting in about 90% solubilization recovery. The solubilized cytochromes P-450 were further separated by AE–FPLC, with UV detection, or coupled to ICP–MS with an octapole reaction system, ICP–(ORS)MS (monitoring Fe signals at masses 54, 56, and 57). A sampling procedure and chromatographic conditions are developed and were successfully applied to iron speciation in trout liver P-450 enzymes. ICP–(ORS)MS detection of P-450 enzymes is Fe-specific and so will give accurate information on the prosthetic group of the protein, which can constitute an advantageous alternative to classical methods for detection of these hemoproteins.     

Evaluation of different quantitative approaches for the determination of noneasily ionizable molecules by different atmospheric pressure interfaces used in liquid chromatography tandem mass spectrometry: Abamectin as case of study

The liquid chromatography tandem mass spectroscopy residue determination of compounds without any acidic or basic centers such as abamectin has been investigated. Several approaches regarding the interface used and adduct formation have been compared. The low acidity of the hydroxyl groups only made deprotonation feasible using the atmospheric pressure chemical ionization (APCI) interface. To obtain sufficient sensitivity for residue analysis, the Ion Sabre APCI interface was necessary. However, the sensitivity attained was lower than for monitoring adducts in positive ion mode. Using electrospray ionization, different adducts with Na+, NH4+, and Li+ were tested and compared. The best results were obtained for the ammoniated adduct in electrospray ionization (ESI) because of its high sensitivity and the presence of several product ions with similar abundance. The highest sensitivity was reached using an in-source fragment as precursor ion, leading to a limit of detection (LOD) of 2 microg/L with low relative standard deviation. The relatively high abundance of other transitions allowed abamectin confirmation at concentrations close to the LOD (6 microg/L). Alkali ions were found to be a suitable alternative to determine and confirm abamectin at residue levels. The [M + Na]+ also presented various product ions with similar abundance, which allowed confirmation at LOD levels. However, this LOD was found to be almost four times higher than with [M + NH4]+ because of the poor sensitivity of the transitions obtained. Although the use of Li+ facilitated the fragmentation of the adduct [M + Li]+, with similar sensitivity to [M + NH4]+, this fragmentation preferentially generated only one product ion, which did not allow confirmation at concentration levels lower than 15 microg/L. The use of APCI for monitoring adducts was also feasible, but with less sensitivity. The sensitivity increased with the Ion Sabre APCI, although it was still five times lower than with ESI. Other adduct formers such as Co2+ and Ni2+ also were tested with unsatisfactory results.     

Syntheses and Structure of Gd<Subscript>3</Subscript>Rh<Subscript>1.940(7)</Subscript>In<Subscript>4</Subscript>

Summary. The gadolinium–rhodium–indide Gd₃Rh_1.940(7)In₄ was prepared by arc-melting of the elements and subsequent annealing in a corundum crucible in a sealed silica tube. Gd₃Rh_1.940(7)In₄ adopts the hexagonal Lu₃Co_1.87In₄ type, space group , a = 781.4(5), c = 383.8(3) pm, wR2 = 0.0285, BASF = 0.375(1) (merohedric twinning via a twofold axis (xx0)), 648 F² values, 22 variables. The structure is derived from the well known ZrNiAl type through an ordering of rhodium and indium atoms on the Ni2 sites. The Rh/In ordering forces a reduction of the space group symmetry from to , leading to merohedric twinning for the investigated crystal. The Rh1 site has an occupancy of only 94.0(7)%. The investigated crystal had a composition Gd₃Rh_1.940(7)In₄. The main geometrical motif are three types of centered, tricapped trigonal prisms, i.e., [Rh1In2₆Gd₃], [Rh2Gd₆In2₃], and [In1Gd₆In2₃]. The shortest interatomic distances occur for Rh–In (276–296 pm) followed by In–In (297 pm). Together, the rhodium and indium atoms build up a three-dimensional [Rh_1.940(7)In₄] network, in which the gadolinium atoms fill slightly distorted pentagonal channels. The crystal chemistry of Gd₃Rh_1.940(7)In₄ is discussed on the basis of a group-subgroup scheme.     

Comparative receptor mapping of serotoninergic 5-HT3 and 5-HT4 binding sites*

The clinical use of currently available drugs acting at the5-HT₄ receptor has been hampered by their lack of selectivityover 5-HT₃ binding sites. For this reason, there is considerableinterest in the medicinal chemistry of these serotonin receptor subtypes, andsignificant effort has been made towards the discovery of potent and selectiveligands. Computer-aided conformational analysis was used to characterizeserotoninergic 5-HT₃ and 5-HT₄ receptorrecognition. On the basis of the generally accepted model of the5-HT₃ antagonist pharmacophore, we have performed a receptormapping of this receptor binding site, following the active analog approach(AAA) defined by Marshall. The receptor excluded volume was calculated as theunion of the van der Waals density maps of nine active ligands(pK_i 8.9), superimposed in pharmacophoric conformations.Six inactive analogs (pK_i < 7.0) were subsequently used todefine the essential volume, which in its turn can be used to define theregions of steric intolerance of the 5-HT₃ receptor. Five activeligands (pK_i 9.3) at 5-HT₄ receptors wereused to construct an antagonist pharmacophore for this receptor, and todetermine its excluded volume by superimposition of pharmacophoricconformations. The volume defined by the superimposition of five inactive5-HT₄ receptor analogs that possess the pharmacophoric elements(pK_i 6.6) did not exceed the excluded volume calculated forthis receptor. In this case, the inactivity may be due to the lack of positiveinteraction of the amino moiety with a hypothetical hydrophobic pocket, whichwould interact with the voluminous substituents of the basic nitrogen ofactive ligands. The difference between the excluded volumes of both receptorshas confirmed that the main difference is indeed in the basic moiety. Thus,the 5-HT₃ receptor can only accommodate small substituents inthe position of the nitrogen atom, whereas the 5-HT₄ receptorrequires more voluminous groups. Also, the basic nitrogen is located at ca.8.0 Å from the aromatic moiety in the 5-HT₄ antagonistpharmacophore, whereas this distance is ca. 7.5 Å in the5-HT₃ antagonist model. The comparative mapping of bothserotoninergic receptors has allowed us to confirm the three-componentpharmacophore accepted for the 5-HT₃ receptor, as well as topropose a steric model for the 5-HT₄ receptor binding site. Thisstudy offers structural insights to aid the design of new selective ligands,and the resulting models have received some support from the synthesis of twonew active and selective ligands: 24 (K_i(5-HT₃)= 3.7 nM; K_i(5-HT₄) > 1000 nM) and 25(K_i(5-HT₄) = 13.7 nM;K_i(5-HT₃) > 10 000 nM).