In vivo application of intestinal pH measurement using 2',7'-bis(carboxyethyl)-5,6-carboxyfluorescein (BCECF) fluorescence imaging

Measurement of gastrointestinal intramucosal pH (pHim) has been recognized as an important factor in the detection of hypoxia-induced dysfunctions. However, current pH measurement techniques are limited in terms of time and spatial resolutions. A major advance in accurate pH measurement was the development of the ratiometric fluorescent indicator dye, 2',7'-bis(carboxyethyl)-5,6-carboxyfluorescein (BCECF). This study aimed to set up and validate a fluorescence imaging technique to measure in vivo the intramucosal pH (pHim) of the intestine. The intestine was inserted into an optical chamber placed under a microscope. Animals were injected intravenously with the pH-sensitive fluorescent dye BCECF. Fluorescence was visualized by illuminating the intestine alternately at 490 and 470 nm. The emitted fluorescence was directed to an intensified camera. The ratio of emitted fluorescence at excitation wavelengths of 490 and 470 nm was measured, corrected and converted to pHim by constructing a calibration curve. The pHim controls were performed with a pH microelectrode and were correlated with venous blood gas sampling. Results show that pHim is determined with an accuracy of +/- 0.07 pH units and a response time of 1 min. In conclusion pHim mapping of rat intestine can be obtained by fluorescence imaging using BCECF. This technology could be easily adapted for endoscopic pH measurements.     

Determination of metoprolol enantiomers in human urine by GC-MS using (−)-α-methoxy-α-(trifluoromethyl)phenylacetyl chloride as a chiral derivatizing agent

Summary A method for the assay of R-(+)- and S-(−)- metoprolol in human urine has been developed using gas chromatography-mass spectrometry. The method involved purification by liquid-liquid extraction and derivatization with N-methyl-N-(trimethylsilyl)trifluoroacetamide to form an O-silyl ether, followed by subsequent chiral derivatization with (−)-α-methoxy-α-(trifluoromethyl)phenylacetyl chloride to form diastereomeric amide. The reaction was rapid and the diastereomeric derivatives were well resolved. Quantitation was performed by selected-ion monitoring of fragment ions of the diastereomers in electron impact ionization mode. No racemization was found during the reaction. The detection limit was 0.5 ng·mL⁻¹. The intra-day variation ranged between 0.38 and 7.86% in relation to the measured concentration and inter-day variation was 2.26–8.06%. The method has been applied to the determination of R-(+)-and S-(−)- metoprolol in human urine from healthy volunteers dosed with racemic metoprolol tartrate.     

Examining the balance between efficiency and resilience in closed-loop supply chains

Central European Journal of Operations Research - We study a hybrid system where the demand of customers can be satisfied by both manufacturing new products and remanufacturing used products. To...     

Preparation of USY zeolite VOx supported catalysts from V(AcAc)3 and NH4VO3. Catalytic properties for the dehydrogenation of n-butane in oxygen-free atmosphere

The preparation of different samples of vanadia supported on ultrastable zeolite (VO(x)/USY) is discussed. The samples were prepared in order to obtain highly dispersed V-species, avoiding the formation of crystalline vanadia and the destruction of the zeolite framework. Two methods were employed for preparing VO(x)/USY samples: an organic route using V(AcAc)3 and an inorganic route using NH4VO3. The characterization of the samples was performed with XRD, TPR, NH3-TPD, and N2 isotherms. From these results it is concluded that when VO(x) is supported on the surface of USY from acidic aqueous solution of ammonium metavanadate, the destruction of the zeolite framework is accomplished. For higher pH values in the impregnating solution, undesired V2O5 is formed on the USY surface. On the other hand, VO(x)/USY prepared from the organic precursor shows no destruction of the USY structure. In addition, highly dispersed VO(x) are formed, though for relatively high V loadings (6%) an obstruction of the zeolite windows takes place. The samples are tested as catalysts for gas phase dehydrogenation of n-butane to olefins. The catalysts prepared from NH4VO3 are almost inactive for the reaction. On the other hand, both samples prepared from V(AcAc)3 present initial conversion levels in the 8-12% range. However, the selectivity depends on the V loading, the catalysts with 6% loading being the most selective (75%). The catalytic patterns of the samples (activity and selectivity) are in agreement with the physicochemical features of the VO(x)/USY surface.     

Reactions of thiosemicarbazones derived from beta-keto amides and beta-keto esters with Zn(II) and Cd(II) acetates: influence of metal, substitution, reagent ratio and temperature on metal-induced cyclization

Zinc(II) and cadmium(II) acetates were reacted in methanol under various experimental conditions with thiosemicarbazones derived from beta-keto amides or beta-keto esters (HTSC). Some of these reactions afforded thiosemicarbazonate complexes [M(TSC)2] with IR and NMR spectra compatible with N,S-coordination, but most gave complexes [ML2], where HL is a substituted 2,5-dihydro-5-oxo-1H-pyrazole-1-carbothioamide resulting from cyclization of the HTSC. Some of these pyrazolonates and two of the HL ligands were studied by X-ray diffractometry, and their structures are discussed. Surprisingly, the reactions of zinc(II) acetate with HTSC in 1:1 mol ratio usually gave a third, previously unreported type of complex with a dideprotonated ligand, [Zn(L-H)], which was also formed when [ZnL2] and Zn(OAc)2 interacted at room temperature in 1:1 mol ratio. These L-H complexes are highly insoluble in all common solvents, which hinders their characterization but suggests that they are polymeric in nature.     

Synthesis and acid-base properties of (1H-benzimidazol-2-yl-methyl)phosphonate (Bimp2-). Evidence for intramolecular hydrogen-bond formation in aqueous solution between (N-1)H and the phosphonate group

The synthesis of (1H-benzimidazol-2-yl-methyl)phosphonic acid, H2(Bimp)+/-, is described: 2-chloromethylbenzimidazole was reacted with ethylchloroformate to give 1-carboethoxy-2-chloromethylbenzimidazole which was treated with trimethyl phosphite and after hydrolysis with aqueous HBr H2(Bimp)+/- was obtained. In H2(Bimp)+/- one proton is at the N-3 site and the other at the phosphonate group; both acidity constants were determined in aqueous solution by potentiometric pH titrations (25 degrees C; I = 0.1 M, NaNO3) and this furnished the pKa values of 5.37 +/- 0.02 and 7.41 +/- 0.02, respectively. The acidity constant for the release of the primary proton from the P(O)(OH)2 group of H3(Bimp)+ was estimated: pKa = 1.5 +/- 0.2. Moreover, Bimp2- can be further deprotonated at its neutral (N-1/N-3)H site to give the benzimidazolate residue, but this reaction occurs only in strongly alkaline solution (KOH); application of the H_ scale developed by G. Yagil (J. Phys. Chem., 1967, 71, 1034) together with UV spectrophotometric measurements gave pKa = 14.65 +/- 0.12. Comparisons with acidity constants taken from the literature show that this latter pKa value is far too large and this allows the conclusion that an intramolecular hydrogen bond is formed between the (N-1/N-3)H site and the phosphonate group of Bimp2-; the formation degree of this hydrogen-bonded isomer is estimated to be 98 +/- 2%. The general relevance of this and the other results are shortly discussed and the species distribution for the Bimp system in dependence on pH is provided.     

Cycloaddition reaction of 2-azadienes derived from beta-amino acids with electron-rich and electron-deficient alkenes and carbonyl compounds. Synthesis of pyridine and 1,3-oxazine derivatives

Functionalized keto-enamines 6 were obtained by nucleophilic addition of enol ethers to the imine moiety of 2-azadienes derived from dehydroaspartic esters 4. Reactions of 2-azadiene 4c containing three electron-withdrawing substituents (CO(2)R) with enol ethers 5 in the presence of lithium perchlorate led to the formation of tetrahydropyridine derivatives 7 in a regio- and stereoselective fashion. 2H-[1,3]-oxazines 10 and pyridine derivatives 12 and 13 were obtained by heterocycloaddition reactions of electron-poor azadienes 4d-g containing two electron-withdrawing substituents (4-O(2)N-C(6)H(4), CO(2)R) in positions 1 and 4 with carbonyl derivatives (ethyl glyoxalate 9a and diethyl ketomalonate 9b) and the electron-deficient olefin tetracyanoethylene 11.     

Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.