The electrophilic reactions of pentacyanonitrosylferrate(II) with hydrazine and substituted derivatives. Catalytic reduction of nitrite and theoretical prediction of eta(1)-, eta(2)-N(2)O bound intermediates

The electrophilic reactivity of the pentacyanonitrosylferrate(II) ion, [Fe(CN)(5)NO](2)(-), toward hydrazine (Hz) and substituted hydrazines (MeHz, 1,1-Me(2)Hz, and 1,2-Me(2)Hz) has been studied by means of stoichiometric and kinetic experiments (pH 6-10). The reaction of Hz led to N(2)O and NH(3), with similar paths for MeHz and 1,1-Me(2)Hz, which form the corresponding amines. A parallel path has been found for MeHz, leading to N(2)O, N(2), and MeOH. The reaction of 1,2-Me(2)Hz follows a different route, characterized by azomethane formation (MeNNMe), full reduction of nitrosyl to NH(3), and intermediate detection of [Fe(CN)(5)NO](3)(-). In the above reactions, [Fe(CN)(5)H(2)O](3)(-) was always a product, allowing the system to proceed catalytically for nitrite reduction, an issue relevant in relation to the behavior of the nitrite and nitric oxide reductase enzymes. The mechanism comprises initial reversible adduct formation through the binding of the nucleophile to the N-atom of nitrosyl. The adducts decompose through OH(-) attack giving the final products, without intermediate detection. Rate constants for the adduct-formation steps (k = 0.43 M(-)(1) s(-)(1), 25 degrees C for Hz) decrease with methylation by about an order of magnitude. Among the different systems studied, one-, two-, and multielectron reductions of bound NO(+) are analyzed comparatively, with consideration of the role of NO, HNO (nitroxyl), and hydroxylamine as bound intermediates. A DFT study (B3LYP) of the reaction profile allows one to characterize intermediates in the potential hypersurface. These are the initial adducts, as well as their decomposition products, the eta(1)- and eta(2)-linkage isomers of N(2)O.     

The influence of cosolvent polarity on the flow properties of hydroalcoholic gels: empirical models

The aim of this study was to investigate the influence of cosolvent polarity on the rheological flow properties of aqueous and hydroalcoholic gels obtained from the Carbopol Ultrez 10 base and used for topical applications. Specifically, we have examined the effect of pH (range 4.0--7.0) on the consistency and flow properties of dispersed systems in water and mixtures--15 : 85% v/v of methanol : water, ethanol : water, n-propanol : water and n-butanol : water--at a constant polymer concentration of 0.3% w/w. The gels, which had decreasing polarity values in the jellifying medium, showed qualitatively similar flow behavior, characteristic of pseudoplastic systems, and all of the flow curves were adjusted to the Ostwald model. Sigmoidal dose response functions were calculated to describe the flow and consistency indexes as a function of pH. As a result, the influence of alcohol polarity on the polymer network has been assessed meaningfully using the empirical parameters obtained: maximum consistency index value (k(max)), pH value required for 50% development of polymer network (pH(50)), and asymptotic flow index value (n(min)) for the fully structured gels.     

Fitting complex potential energy surfaces to simple model potentials: application of the simplex-annealing method

A stochastic method of optimization, which combines simulated annealing with simplex, is implemented to fit the parameters of a simple model potential. The main characteristic of the method is that it explores the whole space of the parameters of the model potential, and therefore it is very efficient in locating the global minimum of the cost function, in addition to being independent of the initial guess of the parameters. The method is employed to fit the complex intermolecular potential energy surface of the dimer of water, using as a reference the spectroscopic quality anisotropic site-site potential of Feller et al. The simple model potential chosen for its reparameterization is the MCY model potential of Clementi et al. The quality of the fit is assessed by comparing the geometry of the minimum, the harmonic frequencies, and the second virial coefficients of the parameterized potential with the reference one. Finally, to prove more rigorously the robustness of this method, it is compared with standard nonstochastic methods of optimization.     

UV index experimental values during the years 2000 and 2001 from the Spanish broadband UV-B radiometric network

An analysis is made of experimental ultraviolet erythemal solar radiation data measured during the years 2000 and 2001 by the Spanish UV-B radiation evaluation and prediction network. This network consists of 16 Robertson-Berger type pyranometers for evaluating solar erythemal radiation and five Brewer spectroradiometers for evaluating the stratospheric ozone. On the basis of these data the Ultraviolet Index (UVI) was evaluated for the measuring stations that are located either in coastal regions or in the more densely populated regions inland on the Iberian Peninsula. It has been checked that in most cases the maximum irradiance values corresponded to solar noon, although there were exceptions that could be explained by cloudiness. The maximum experimental values of the UVI were around 9 during the summer, though frequently passing this value at the inland measurement stations. The annual accumulated dose of irradiation on a horizontal plane has also been studied, as well as the evolution through the year in units of energy, standard erythemal doses and minimum erythemal doses, according to different phototypes.     

A New Family of Nonstoichiometric Layered Rare-Earth Tin Antimonides, RESn(x)()Sb(2) (RE = La, Ce, Pr, Nd, Sm): Crystal Structure of LaSn(0.75)Sb(2)

A new class of nonstoichiometric layered ternary rare-earth tin antimonides, RESn(x)()Sb(2) (RE = La, Ce, Pr, Nd, Sm), has been synthesized through reaction of the elements at 950 degrees C. In the lanthanum series LaSn(x)()Sb(2), tin can be incorporated from a maximum content of x approximately 0.7 or 0.8 to as low as x approximately 0.10. The structure of lanthanum tin diantimonide with the maximum tin content, LaSn(0.75)Sb(2), has been determined by single-crystal X-ray diffraction methods. It crystallizes in the orthorhombic space group -Cmcm with a = 4.2425(5) ?, b = 23.121(2) ?, c = 4.5053(6) ?, and Z = 4. The isostructural rare-earth analogues were characterized by powder X-ray diffraction. The structure of LaSn(0.75)Sb(2) comprises layers of composition "LaSb(2)" in which La atoms are coordinated by Sb atoms in a square-antiprismatic geometry. Between these layers reside chains of Sn atoms distributed over three crystallographically independent sites, each partially occupied at about 20%. The structure of LaSn(0.75)Sb(2) can be regarded as resulting from the excision of RE-Sb and Sb-Sb bonds in the related structures of binary rare-earth diantimonides, RESb(2), and then intercalation of Sn atoms between layers.     

Quaternarisation de l'atome d'azote de systemes tautomeres de la serie des oxo-4 thiazoles. Cycloadditions dipolaires 1,3 des thiazoles mesoioniques formes in situ

4-Hydroxythiazoles and N-acylimino 4-thiazolidinones show similar tautomeric behaviour to azlactones. However, the mechanism of their reaction with dimethylacetylenedicarboxylate or with ethyl vinyl ether differs fundamentally. In the thiazole series, the first step is the quaternization of the nitrogen atom. The mesoionic thiazole intermediate is then trapped by a second molecule of the dipolarophile.     

Ag(I) complexes with alkylidene-bis(2-aminopyrimidines) as building units for discrete metallomacrocyclic frames. A structural and solution study

Alkylidene-bis(2-aminopyrimidines) (pyr2Cx, x = 2-5) are useful ligands to interact with Ag(I) yielding discrete metallocycles. Crystal structures of the [(pyr2C2)Ag(NO3)]2 and [(H-pyr2C4)Ag(NO3)2]2 have been isolated where each macrocyclic moiety interacts with their surroundings through weak interactions, yielding 3D discrete structures, On the other hand, the solution study shows that the equilibrium constants for the formation of Ag(pyr2Cx)+ complexes are higher than the literature values for Ag(I) complexes with single pyrimidines, although the differences could be explained by invoking the solid-state structures of the Ag(I)-pyr2Cx complexes.     

In vivo application of intestinal pH measurement using 2',7'-bis(carboxyethyl)-5,6-carboxyfluorescein (BCECF) fluorescence imaging

Measurement of gastrointestinal intramucosal pH (pHim) has been recognized as an important factor in the detection of hypoxia-induced dysfunctions. However, current pH measurement techniques are limited in terms of time and spatial resolutions. A major advance in accurate pH measurement was the development of the ratiometric fluorescent indicator dye, 2',7'-bis(carboxyethyl)-5,6-carboxyfluorescein (BCECF). This study aimed to set up and validate a fluorescence imaging technique to measure in vivo the intramucosal pH (pHim) of the intestine. The intestine was inserted into an optical chamber placed under a microscope. Animals were injected intravenously with the pH-sensitive fluorescent dye BCECF. Fluorescence was visualized by illuminating the intestine alternately at 490 and 470 nm. The emitted fluorescence was directed to an intensified camera. The ratio of emitted fluorescence at excitation wavelengths of 490 and 470 nm was measured, corrected and converted to pHim by constructing a calibration curve. The pHim controls were performed with a pH microelectrode and were correlated with venous blood gas sampling. Results show that pHim is determined with an accuracy of +/- 0.07 pH units and a response time of 1 min. In conclusion pHim mapping of rat intestine can be obtained by fluorescence imaging using BCECF. This technology could be easily adapted for endoscopic pH measurements.     

Determination of metoprolol enantiomers in human urine by GC-MS using (−)-α-methoxy-α-(trifluoromethyl)phenylacetyl chloride as a chiral derivatizing agent

Summary A method for the assay of R-(+)- and S-(−)- metoprolol in human urine has been developed using gas chromatography-mass spectrometry. The method involved purification by liquid-liquid extraction and derivatization with N-methyl-N-(trimethylsilyl)trifluoroacetamide to form an O-silyl ether, followed by subsequent chiral derivatization with (−)-α-methoxy-α-(trifluoromethyl)phenylacetyl chloride to form diastereomeric amide. The reaction was rapid and the diastereomeric derivatives were well resolved. Quantitation was performed by selected-ion monitoring of fragment ions of the diastereomers in electron impact ionization mode. No racemization was found during the reaction. The detection limit was 0.5 ng·mL⁻¹. The intra-day variation ranged between 0.38 and 7.86% in relation to the measured concentration and inter-day variation was 2.26–8.06%. The method has been applied to the determination of R-(+)-and S-(−)- metoprolol in human urine from healthy volunteers dosed with racemic metoprolol tartrate.     

Examining the balance between efficiency and resilience in closed-loop supply chains

Central European Journal of Operations Research - We study a hybrid system where the demand of customers can be satisfied by both manufacturing new products and remanufacturing used products. To...