Measurement of the electron distribution function in flowing afterglow plasma by means of Langmuir probe

Conclusion In the present report an attempt has been made to use the second derivative method for measurements of the electron distribution function in flowing afterglow plasma. It has been shown that using the cross-correlation technique, this method seems to be a useful tool for flowing afterglow plasma investigation.     

Relative stability of the2 A 1g and2 E g states of the C2H 6 + ion

Anab initio study of the relative stability for the states² A _1g and² E _g of C₂H ₆ ⁺ has been carried out. The results of the Open Shell Restricted Hartree-Fock calculations lead to assign the² A _{1 g} as the ground state of the molecule in agreement with previous SCF calculations.The correlation energy associated to both states has been calculated within the correlation hole model and the results, contrary to those obtained from Configuration Interaction calculations, do not alter qualitatively the conclusions from SCF.     

Use of non-aqueous capillary electrophoresis for the quality control of commercial saffron samples

A non-aqueous capillary electrophoresis (NACE) method for quantifying the seven crocin metabolites that are the major biologically active ingredients of saffron was developed. Separation is done by using a fused silica capillary filled with a 12.5 mM H3BO3/37.5 mM sodium tetraborate methanolic solution as background electrolyte. The results obtained were compared with the total index "safranal value", widely used as a quality measure of saffron products. The comparison revealed that the proposed NACE method provides useful information not obtained in the safranal value. Infact, samples with a similar safranal value can contain crocin metabolites in different concentrations and relative proportions. This new method is very useful for quality control in commercial saffron samples.     

Temperature dependence of second critical micelle concentration of dodecyldimethylbenzylammonium bromide in aqueous solution

The specific conductivity of dodecyldimethylbenzylammonium bromide (C12BBr) in aqueous solutions, in the temperature range of 15 to 40 °C, has been measured as a function of molality. The two breaks which were found on the conductivity against molality plots were attributed to the critical micelle concentration, cmc, and second critical micelle concentration, 2^nd cmc, respectively. The ratio of the slopes, S, of the three linear fragments on the plots, S2/S1 and S3/S1, was attributed to the degree of ionization of the micelles at cmc and 2^nd cmc respectively. It was shown that the values of the 2^nd cmc estimated above 27 °C are only apparent due to thermal disintegration of the micelles. In the temperature range of 15 to 27 °C, the values of the 2^nd cmc increase gradually and the plot of the 2^nd cmc against temperature is concave. The ratio of 2^nd cmc/cmc for C12BBr at 25 °C amounts to 15 and appears to be high compared to the literature values for other surfactants. For comparative purposes the cmc and 2^nd cmc values were also estimated conductometrically for decyldimethylbenzylammonium bromide (C10BBr) at 25 °C. The 2^nd cmc value for this surfactant is higher compared to the value for the C12 homologue by a factor of 2.6.The standard Gibbs free energies of micellization at cmc and at the 2^nd cmc were estimated from the experimental data for both surfactants at 25 °C.     

Comparative receptor mapping of serotoninergic 5-HT3 and 5-HT4 binding sites*

The clinical use of currently available drugs acting at the5-HT₄ receptor has been hampered by their lack of selectivityover 5-HT₃ binding sites. For this reason, there is considerableinterest in the medicinal chemistry of these serotonin receptor subtypes, andsignificant effort has been made towards the discovery of potent and selectiveligands. Computer-aided conformational analysis was used to characterizeserotoninergic 5-HT₃ and 5-HT₄ receptorrecognition. On the basis of the generally accepted model of the5-HT₃ antagonist pharmacophore, we have performed a receptormapping of this receptor binding site, following the active analog approach(AAA) defined by Marshall. The receptor excluded volume was calculated as theunion of the van der Waals density maps of nine active ligands(pK_i 8.9), superimposed in pharmacophoric conformations.Six inactive analogs (pK_i < 7.0) were subsequently used todefine the essential volume, which in its turn can be used to define theregions of steric intolerance of the 5-HT₃ receptor. Five activeligands (pK_i 9.3) at 5-HT₄ receptors wereused to construct an antagonist pharmacophore for this receptor, and todetermine its excluded volume by superimposition of pharmacophoricconformations. The volume defined by the superimposition of five inactive5-HT₄ receptor analogs that possess the pharmacophoric elements(pK_i 6.6) did not exceed the excluded volume calculated forthis receptor. In this case, the inactivity may be due to the lack of positiveinteraction of the amino moiety with a hypothetical hydrophobic pocket, whichwould interact with the voluminous substituents of the basic nitrogen ofactive ligands. The difference between the excluded volumes of both receptorshas confirmed that the main difference is indeed in the basic moiety. Thus,the 5-HT₃ receptor can only accommodate small substituents inthe position of the nitrogen atom, whereas the 5-HT₄ receptorrequires more voluminous groups. Also, the basic nitrogen is located at ca.8.0 Å from the aromatic moiety in the 5-HT₄ antagonistpharmacophore, whereas this distance is ca. 7.5 Å in the5-HT₃ antagonist model. The comparative mapping of bothserotoninergic receptors has allowed us to confirm the three-componentpharmacophore accepted for the 5-HT₃ receptor, as well as topropose a steric model for the 5-HT₄ receptor binding site. Thisstudy offers structural insights to aid the design of new selective ligands,and the resulting models have received some support from the synthesis of twonew active and selective ligands: 24 (K_i(5-HT₃)= 3.7 nM; K_i(5-HT₄) > 1000 nM) and 25(K_i(5-HT₄) = 13.7 nM;K_i(5-HT₃) > 10 000 nM).     

Electrosynthesis of 3-chloro-1,4-disubstituted-2(1H)- quinolinones and 3,3-dichloro-4-hydroxy-1,4-disubstituted- 3,4-dihydro-2(1H)-quinolinones,as well as a new convenient process to dioxindoles

Cathodic reduction of N-(2-acyl(or aroyl)phenyl)-2,2,2,-trichloro-N-alkylacetamide at -1.2 V (vs SCE) under aprotic conditions yields 3-chloro-1,4-disubstituted-2(1H)-quinolinones (1) as the major product. When the reaction is carried out at -0.8 V (vs SCE), 3,3-dichloro-4-hydroxy-1,4-disubstituted-3,4-dihydro-2(1H)-quinolinones (2) and 1,4-disubstituted-1,4-dihydro-quinoline-2,3-dione (3) are formed. Ring contraction of 2 and 3 in aqueous sodium hydroxide resulted in the formation of 3-hydroxy-1,3-dihydroindol-2-ones (5). The most plausible reaction mechanisms are proposed.     

A novel support with artificially created recognition for the selective removal of proteins and for affinity chromatography

Summary Acrylamide and N,N-methylenebisacrylamide were copolymerized in the presence of a protein to form a gel which was pressed through a sieve. The gel particles obtained were packed into a chromatographic tube. The experimental conditions for the polymerization are such that the pores of the gel particles are large enough to permit the protein to diffuse out of the particles, so that the entrapped protein can be removed from the bed by washing with an aqueous solution. However the interaction with the matrix is so strong that the protein can be desorbed only by a buffer containing 0.5 M sodium chloride or by a 10% solution of acetic acid containing 10% SDS. When a sample containing the protein present during the polymerization was applied to the column along with other proteins this protein was the only one adsorbed. The technique worked selectively with hemoglobin, cytochrome C and transferrin.     

111In(111Cd) quadrupole interaction in the chalcogenide spinel CdCr2Se4

The¹¹¹Cd quadrupole coupling in the spinel CdCr₂Se₄ is investigated by TDPAC after different sample treatments. The experiments are consistent with Se vacancies causing the non-cubic probe environments and with the assumption that the majority of the¹¹¹In atoms are positioned at A-sites.     

Effect of grinding on thermal reactivity of ceramic clay minerals

The effect of grinding on thermal behavior of pyrophyllite and talc as commonly used ceramic clay minerals was investigated by DTA, TG, emanation thermal analysis (ETA), B.E.T. surface area (s.a.) measurements, X-ray diffraction (XRD) and scanning electron microscopy (SEM). A vibratory mill was used in this study, grinding time was 5 min. It was found that the grinding caused an increase in surface area and a grain size reduction of the samples. From TG and DTA results it followed that grinding caused a decrease of the temperature at which the structure bound OH groups released. The formation of high temperature phases was enhanced with the ground samples. For the ground talc sample the crystallization of non-crystalline phase into orthorhombic enstatite was observed in the range of 800°C. For ground pyrophyllite a certain agglomeration of grains was observed in the range above 950°C. Moreover, for both clays the ETA characterized a closing up of subsurface irregularities caused by grinding as a decrease of the emanation rate in the range 250–400°C. The comparison of thermal analysis results with the results of other methods made it possible to better understand the effect of grinding on the ceramic clays.     

trans‐[1,3‐Bis(2,4,6‐trimethylphenyl)imidazolidin‐2‐ylidene]dichlorido(triphenylphosphine‐κP)palladium(II)

The title complex, [PdCl₂(C₂₁H₂₆N₂)(C₁₈H₁₅P)], shows slightly distorted square‐planar coordination around the Pd^II metal centre. The Pd—C bond distance between the N‐heterocyclic ligand and the metal atom is 2.028 (5) Å. The dihedral angle between the two trimethylphenyl ring planes is 36.9 (2)°.