Concentration and clean-up of trace hydrocarbons from atmospheric particulate matter

Summary The aim of this work is to establish the best conditions for concentration and purification steps in the trace analysis of aliphatic and polycyclic aromatic hydrocarbons (PAH) from atmospheric particulate matter by gas chromatography-flame ionisation detection (GC-FID) and high performance liquid chromatography with ultraviolet and fluorescence detection (HPLC-UV-FL). The best results for the more volatile compound were obtained with a combination of rotary evaporation and a stream of nitrogen (near to 100% for aliphatic hydrocarbons and from 70 to 105% for PAH). Two types of solid phase extraction (SPE)cartridges (Supelclean ^tm LC-Silica SPE tubes and Sep-Pak^? Plus silica cartridges) and glass column were examined for the purification and fractionation step. Blank chromatograms of both types of cartridges analysed by GC-FID made this study difficult, because a PSS (programmed split-splitless) injector was employed thereby increasing the sensitivity. This problem was not observed in the HPLC-UV-FL blank chromatograms of these cartridges. Glass columns filled with silica and alumina were chosen because no interference was found in the GC-FID blank chromatograms and the best recoveries in the fractionation of both aliphatic hydrocarbons and PAH were achieved. This is especially important when aliphatic hydrocarbons concentrations are lower than 1 μg mL⁻¹. Finally, the selected conditions were applied to the analysis of hydrocarbons in real atmospheric particulate samples.     

Self-assembled peptide tubelets with 7 A pores

Here we report the preparation and structural characteristics of self-assembling peptide tubelets composed of 32-membered rings formed of alternating alpha-amino acids and cis-3-aminocyclohexanecarboxylic acids. The tubelets possess a partial hydrophobic core environment, provided by the projection of the cyclohexane C2 methylene moiety into the lumen, and a Van der Waals pore diameter of about 7 A.     

A comparative study of several HPLC methods for determining free amino acid profiles in honey

A study of the viability of three derivatizing reagents for obtaining amino acid profiles in honey through high performance liquid chromatography (HPLC) is presented. A method using diode array detection based on a reaction with diethyl ethoxymethylene malonate (DEMM) and two other methods using fluorescence detection based on derivatization with fluorenylmethyl chloroformate (FMOC-Cl) and 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC) have been developed. The three methods yield detection limits close to the ppb level, but vary in relation to other analytical characteristics. The use of methyl chloroformate derivatives allows the profile to be obtained with the greatest sensitivity within a short time frame. On applying such methods to honey samples of diverse botanical origin, we observe that the proline values obtained are always lower than those found using the official spectrophotometric method, thereby underlining the advisability of using HPLC methods to reduce uncertainty in these results.     

Semicarbazones and thiosemicarbazones,XII: Crystal structure of salicylaldehyde semicarbazone

Summary The crystal and molecular structure of salicylaldehyde semicarbazone was obtained by single crystal X-ray diffraction. The O atom of the semicarbazone fragment isanti to the N atom of the hydrazinic group. The distribution of bond lengths in the semicarbazone fragment indicates delocalization of the -electrons. The crystal structure is stabilized by intra- and intermolecular hydrogen bonds.

---

Semicarbazone und Thiosemicarbazone, 12. Mitt.: Die Kristallstruktur des Salicylaldehyd-Semicarbazons

Zusammenfassung Die Kristallstruktur und die molekulare Struktur des Salicylaldehyd-Semicarbazons wurde über Einkristall-Röntgenstreuung ermittelt. Das O-Atom des Semicarbazonteils stehtanti zum N-Atom der Hydrazin-Gruppierung. Die Bindungslängen in der Semicarbazoneinheit zeigen eine Delokalisierung der -Elektronen an. Die Geometrie der Verbindung wird durch stabilisierende intra- und intermolekulare Wasserstoffbrückenbindungen bestimmt.

     

Structural study of copper-nickel aluminate (CuxNi1−xAl2O4) spinels

CuAl₂O₄, NiAl₂O₄, and three ternary spinels Cu_xNi_1?xAl₂O₃ have been prepared, in polycrystalline form, by solid-state reaction of mixtures of CuO, NiO, and Al₂O₃ at 1223 K. X-Ray powder diffractometry, coupled with adequate computational methods, allowed determination of the unit-cell length, oxygen positional parameter, and cation distribution for each compound. Interdependence of these structural parameters is closely analyzed on the ternary oxide spinels. The one-electron difference between the Cu²⁺ and Ni²⁺ ions was found to be enough to render them distinguishable by X-ray powder diffraction.     

Asymmetry and magnetism in bis(oximato)-bridged heterobimetallic compounds: a computational approach

A density functional study of exchange coupling was carried out for a series of heterobinuclear oximato-bridged transition metal complexes. Model calculations were used to examine the influence of the electronic configuration of the metal atoms on the coupling constants. This analysis was complemented by a study of the variation of the coupling constant with the most usual structural distortions within this family of compounds. The influence of the nature of the terminal ligands as well as that of the symmetry on the bridge were also investigated.     

PPP-Berechnungen und Vergleich der Elektronenspektren von iso-π-elektronischen Sauerstoff-, Stickstoff-, Schwefel- und Selenheterocyclen

Zusammenfassung 42 Heterocyclen, die sich formal von alternierenden und nichtalternierenden Kohlenwasserstoffen durch Ersatz einer Doppelbindung durch die Heteroatome Sauerstoff, Stickstoff, Schwefel und Selen ableiten, werden nach dem Pariser-Parr-Pople-Verfahren berechnet und ihre Spektren im nahen Ultraviolett und Sichtbaren beschrieben. Schwefel und Selen werden dabei im LCAO-MO-Verfahren nach dem p-Modell behandelt. In den meisten Fällen können die Berechnungen nicht nur die spektralen Charakteristika gut wiedergeben, sondern auch Beziehungen in den Spektren iso--elektronischer Verbindungen gleicher Struktur verständlich machen. Berechnungen an kationischen Stickstoffheterocyclen führten dann zu falschen Ergebnissen, wenn die Stickstoffparameter vom Pyrroltyp übernommen werden.

---

PPP-calculations and comparison of electronic spectra of iso--electronic oxygen, nitrogen, sulfur, and selenium heterocycles

42 heterocyclic compounds, formally derived from alternant or nonalternant hydrocarbons by replacing a C=C group by an oxygen, nitrogen, sulfur or selenium atom, are studied by the Pariser-Parr-Pople-type of calculation. By means of these results the near ultraviolet and visible spectra are described. The sulfur and the selenium atoms are treated in the LCAO-MO-method using the p-model. In most cases spectral features are not only well reproduced, but interrelations of the spectra of iso--electronic compounds, possessing analogous structures are interpreted, too. On calculating cationic nitrogen heterocycles using parameters of pyrrol type nitrogen results are unsatisfactory.

---

Résumé 42 composés hétérocycliques, formellement dérivés d'hydrocarbures alternants ou non alternants par remplacement d'un groupement C=C par un atome d'oxygène, d'azote, de soufre ou de sélénium, sont étudiés par la méthode de Pariser-Parr-Pople. Les résultats obtenus permettent de décrire le spectre U.V. proche et visible. Soufre et sélénium sont traités en utilisant le modèle p. Dans la plupart des cas les caractères spectraux sont non seulement correctement reproduits, mais les relations entre les spectres des composés iso--électroniques à structures analogues peuvent être interprétées. Les calculs concernant les heterocycles à azote cationique sont insatisfaisants lorsqu'ils sont effectués avec des paramètres de l'azote du type pyrrole.

---

---

Anmerkung: Die Arbeit wurde in dem von Prof. Dr. R. Mayer geleiteten Schwefelarbeitskreis der TU Dresden durchgeführt.     

Multilayered Cu–Ti deposition on silicon substrates for chemiresistor applications

Abstract

On the perspective to develop CuO–TiO₂ MOS, multilayered Cu and Ti thin layers were alternatively deposited on silicon wafers using 25?keV Ar?+?ion beam sputtering and, subsequently, oxidized by thermal annealing in air at 400?°C for 24?h. The deposited films have variable ratios of the Cu and Ti % at. One of the main goal is to obtain such multilayers avoiding the presence of Cu–Ti–O compounds. The samples were characterized in terms of composition (by RBS and SIMS analyses) and morphology (by AFM and SEM investigations). In particular, SIMS maps allows to observe the spatial distribution and thickness of each phase of the Cu/Ti multilayers, and further to observe Cu diffusion and mixing with Ti, as well as phase separation of CuO and TiO₂ in the samples. The reasons of this effect represent an open issue that has to investigated, in order to improve the MOS fabrication.     

Validation of the thermodynamic model of inorganic arsenic in non polluted river waters of the Basque country (Spain)

The thermodynamic model of inorganic arsenic was validated by comparing the predicted As(III) concentration with the experimentally determined one in several river waters samples of the Basque Country (Spain) collected in two sampling campaigns: spring and autumn 2000. This model takes into account the acid-base equilibria of As(III) and As(V) together with the redox equilibria between the H₃AsO₃ and H₃AsO₄ species. A correct prediction of As(III) concentration requires the knowledge of the total concentration of arsenic, pH, redox potential (referred to hydrogen electrode), and ionic strength values of the solution. The estimation of the activity coefficients of the arsenic species was performed by means of the Modified Bromley’s Methodology (MBM).In order to perform the experimental As(III) determination, an analytical method was implemented by using an ion exchange separation of As(III)/As(V) on a continuous FIA-IE-HG-AAS system. The total arsenic concentration was determined together with total concentration of the main alkaline or alkaline-earth metals and anions in the natural waters. Temperature compensated measurements of the pH and redox potentials were made in-situ at the sampling sites.For both seasonal campaigns, the agreement between predicted and experimental As(III) is really high for those samples belonging to non polluted river waters.