Acoustic Analysis of Pathological Voices Compressedwith MPEG System

The MPEG-1 Layer 3 compression schema of audio signal, commonly known as mp3, has caused a great impact in recent years as it has reached high compression rates while conserving a high sound quality. Music and speech samples compressed at high bitrates are perceptually indistinguishable from the original samples, but very little was known about how compression acoustically affects the voice signal. A previous work with normal voices showed a high fidelity at high-bitrate compressions both in voice parameters and the amplitude-frequency spectrum. In the present work, dysphonic voices were tested through two studies. In the first study, spectrograms, long-term average spectra (LTAS), and fast Fourier transform (FFT) spectra of compressed and original samples of running speech were compared. In the second study, intensities, formant frequencies, formant bandwidths, and a multidimensional set of voice parameters were tested in a set of sustained phonations. Results showed that compression at high bitrates (96 and 128 kbps) preserved the relevant acoustic properties of the pathological voices. With compressions at lower bitrates, fidelity decreases, introducing some important alterations. Results from both works, Gonzalez and Cervera and this paper, open up the possibility of using MPEG-compression at high bitrates to store or transmit high-quality speech recordings, without altering their acoustic properties.     

Regularization of Discrete Ill-Posed Problems

The paper concerns conditioning aspects of finite-dimensional problems arising when the Tikhonov regularization is applied to discrete ill-posed problems. A relation between the regularization parameter and the sensitivity of the regularized solution is investigated. The main conclusion is that the condition number can be decreased only to the square root of that for the nonregularized problem. The convergence of solutions of regularized discrete problems to the exact generalized solution is analyzed just in the case when the regularization corresponds to the minimal condition number. The convergence theorem is proved under the assumption of the suitable relation between the discretization level and the data error. As an example the method of truncated singular value decomposition with regularization is considered. This revised version was published online in July 2006 with corrections to the Cover Date.     

Structure and electrochemical behaviour of 4,7-diazaheptyl-trimethoxy-silane and vinyl-trialkoxy-silane adsorbed at silver surface

Novel self-assembled monolayers were obtained on silver using 4,7-diazaheptyl-trimethoxy-silane (SiN) and vinyl-trialkoxy-silane (SiVA, where the alkyl group is 3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57,60-eicozaoxa- hexaheptaconan). It was shown that thus modified metal surface was protected against electrooxidation. A densely packed monolayer remained stable and did not desorb from the Ag electrode on the potential cycling. The structure of SiN and SiVA as well as their complexes with Li⁺ cations were calculated and visualised by the AM1d and PM5 semi-empirical methods.     

Evidences of phase separation in moisture‐cured poly(urethane urea)s by means of temperature modulated differential scanning calorimetry

The degree of phase separation in several moisture‐cured poly(urethane urea)s (PUUs) was studied by FTIR spectroscopy, wide angle X‐ray diffraction (WAXD), and temperature‐modulated differential scanning calorimetry (TMDSC). This latter technique was shown to be particularly useful in analysing the degree of phase separation in PUU polymers. Both phase mixing and phase segregation coexisted in the PUUs and the degree of phase separation increased as the urea hard segment (HS) content in the PUU increased. The maximum solubility of urea HSs into the polyol soft segments (SSs) was achieved for 50 wt % urea HS content in diol‐based PUUs, whereas for triol‐based PUUs the highest solubility between HS and SS was reached for lower urea HS amount. Finally, the higher the urea HS content the higher the extent of phase separation in the PUU. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3034–3045, 2007     

On Oscillation Criteria of Fourth Order Linear Differential Equations

The paper deals with oscillation criteria of fourth order linear differential equations with quasi-derivatives.     

Mechanisms of n‐butanol formation in butyl acrylate latexes

The mechanisms involved in the formation of n‐butanol during the synthesis of butyl acrylate containing latices were investigated. The experimental results showed that neither the hydrolysis of butyl acrylate nor of the ester bond in the butyl acrylate segments of the polymer played a major role in the formation of n‐butanol, which was mainly generated from the polymer backbone, by transfer reactions to polymer chain followed by cyclization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5838–5846, 2007     

Continuously coupled parametric generators and their quantum statistics

In this paper the quantum-statistical properties of light beams propagating in a directional nonlinear coupler are investigated. This device is composed of a pair of linearly coupled nonlinear waveguides operating by means of degenerate parametric downconversion. The possibility of generation of nonclassical states of light in single and compound modes, using the short-length approximation, is discussed. Influence of linear and nonlinear mismatches for generation of nonclassical light is taken into account. This work was supported by Project LN00A015, Research Project No. CEZ: J14/98 and the COST project OC P11.003 of the Czech Ministry of Education.     

Biosorption of Chromium(III) by Biomass of Seaweed Sargassum sp. in a Fixed-Bed Column

This work aimed at modeling chromium biosorption using the biomass of seaweed Sargassum sp. in a fixed-bed column. The mathematical model used was obtained from the mass balance of the component in the liquid phase and in the biosorbent material. The effects of both axial dispersion in the column and the resistance to mass transfer in the solid were considered for the solution of the partial differential equations of the model, using the Galerkin method on finite elements. To represent the equilibrium data of the batch system the Langmuir isotherm were used. The chromium ion adsorption capacity of the seaweed Sargassum sp., at a temperature of 30°C and pH 3.5, was 2.61 mmol/g. The model performance was evaluated from experimental data obtained at 30°C for flow rates of 2, 6 and 8 mL/min. The parameters of the model, mass transfer and axial dispersion coefficients, were adjusted from these experimental data. The model proved adequate to describe chromium biosorption dynamics in fixed-bed columns.