Electrodeposition of PdAu Alloy Nanoparticles on Ionic Liquid Functionalized Graphene Film for the Voltammetric Determination of Oxalic Acid

An ionic liquid functionalized graphene film was prepared and PdAu nanoparticles (NPs) were electrodeposited on it. The PdAu NPs were characterized by various methods and they showed the features of alloys. In 0.2 M H₂SO₄ solution, oxalic acid (OA) exhibited a sensitive anodic peak at the resulting electrode at about 1.1 V (vs. SCE), and the peak current was linear to OA concentration in the range of 5–100 µM with a sensitivity of 45.5 µA/mM. The detection limit was 2.7 µM (S/N=3). The electrode was successfully applied to the determination of OA in real sample.     

One Facile Preparation of N‐Aroyl‐N′‐arylsulfonylhydrazines by Oxidation of Aromatic Aldehyde N‐Arylsulfonylhydrazones with bis(Trifluoroacetoxy)iodobenzene

N‐aroyl‐N′‐arylsulfonylhydrazines can be obtained by oxidation of aromatic aldehyde N‐arylsulfonylhydrazones with bis(trifluoroacetoxy)iodobenzene in acetone at room temperature in mild to good yields.     

"一锅法"N-(2-苯甲酰胺苯基)-水杨醛亚胺/TiCl4·2THF催化乙烯聚合

报道了4个含苯甲酰胺取代的水杨醛亚胺配体: N-(2-苯甲酰胺苯基)-水杨醛亚胺(L1)、 N-(2-苯甲酰胺苯基)-3-甲基水杨醛亚胺(L2)、 N-(2-苯甲酰胺苯基)-3-叔丁基水杨醛亚胺(L3)和N-(2-苯甲酰胺苯基)-3,5-二溴水杨醛亚胺(L4)的合成, 采用 ¹H NMR和HRMS对其结构进行了表征. 在助催化剂甲基铝氧烷(MAO)作用下, 以L3与TiCl₄·2THF为模型催化体系, 在最佳陈化条件(陈化温度为25 ℃, 陈化时间为30 min, 配体与TiCl₄·2THF的摩尔比3∶1)下, 考察了L1~L4/TiCl₄·2THF催化体系Al/Ti摩尔比、 反应时间、 反应温度和聚合压力, 以及配体结构等对乙烯聚合的影响. 结果表明, 随着在水杨醛骨架上氧原子邻位取代基位阻的增大, 催化体系的活性及所得聚乙烯的分子量均有增加, 其中以L3的催化活性最高, 达到224 kg PE/(mol Ti?h). 采用高温 ¹H NMR, ¹³C NMR, GPC-IR和DSC等对由不同配体L1~L4/TiCl₄·2THF得到的聚乙烯样品的微观结构与热性能进行了分析与表征, 结果显示样品为线性高密度聚乙烯, M_n=5.9×10 ⁴~11.9×10 ⁴, 分子量分布(PDI)为21.9~72.1.     

Modeling and electrokinetic evidences on the processes of the Al(III) sorption continuum in SiO2(s) suspension

Reactions of Al(III) at the interface between SiO2(s) and aqueous solution were characteristically and quantitatively studied using electrophoretic methods and applying a surface complexation/precipitation model (SCM/SPM). The surface and bulk properties of Al(III)/SiO2 suspensions were determined as functions of pH and initial Al(III) concentration. Simulated modeling results indicate that the SCM, accounting for the adsorption mechanism, predicts sorption data for low surface coverage only reasonably well. Al(III) hydrolysis and surface hydroxide precipitation must be invoked as the Al(III) concentration and/or pH progressively increase. Accordingly, the three processes in the Al(III) sorption continuum, from adsorption through hydrolysis to surface precipitation, could be identified by the divergence between the SCM/SPM predictions and the experimental data. SiO2(s) suspensions with low Al(III) concentrations (1 x 10(-4) and 1 x 10(-5) M) exhibit electrophoretic behavior similar to that of a pure SiO2(s) system. In Al(III)/SiO2 systems with high Al concentrations of 1 x 10(-3), 5 x 10(-3) and 1 x 10(-2) M, three charge reversals (CR) are observed, separately representing, in order of increasing pH, the point of zero charge (PZC) on the SiO2 substrate (CR1), the onset of the surface precipitation of Al hydroxide (CR2), and at a high pH, the PZC of the Al(OH)3 coating (CR3). Furthermore, in the 1 x 10(-3) M Al(III)/SiO2(s) system, CR2 is consistent with the modeling results of SCM/SPM and provides evidence that Al(III) forms a surface precipitate on SiO2(s) at pH above 4. SiO2(s) dissolution was slightly inhibited when Al(III) was adsorbed onto the surface of SiO2(s), as compared to the dissolution that occurs in a pure SiO2(s) suspension system. Al hydroxide surface precipitation dramatically reduced the dissolution of SiO2(s) because the Al hydroxide passive film inhibited the corrosion of the SiO2(s) surface by OH- ions.     

间规聚苯乙烯的化学改性

介绍了间规聚苯乙烯（sPS)的结构，特性和各种化学改性方法，包括在sPS侧链苯环上引入磺酸基，卤素等功能基因，在sPS分子链末端引入马来酸酐，丙烯酸酯等极性基因，与氢化丁二烯－苯乙烯热塑性弹性体（SEBS）形成接枝共聚物，及其与各类烯烃单体的共聚，对进一步拓宽sPs的应用领域具有重要意义。     

Synthesis and Second‐Order Nonlinearities of Chiral Prolinol‐Substituted Chromophores

A new series of thiophene‐ and furan‐containing chromophores with a chiral prolinol donor and a sulfone acceptor has been synthesized. The UV‐vis absorptions, second‐order nonlinear optical properties, and X‐ray crystal structures are described.     

Kinetic and mechanistic studies on the oxidation of pyrrolidine by bis(hydrogenperiodato)argentate(III) complex anion

The kinetics of oxidation of pyrrolidine by bis(hydrogenperiodato)argentate(III) complex anion ([Ag(HIO₆)₂]^5?) was studied in alkaline medium, with reaction temperatures in the range of 15.0–30.0 °C. The experiments indicated that the oxidation follows an overall second-order reaction, being first-order in both Ag(III) and pyrrolidine. The observed second-order rate constants, k′, decreased with increasing [IO₄ ^?] but increased slightly with increasing [OH^?]. The influence of ionic strength on the reaction rate was also investigated. The oxidation resulted in oxidative deamination of pyrrolidine, giving 4-hydroxybutyrate as the product. A reaction mechanism is proposed which includes an equilibrium between [Ag(HIO₆)₂]^5? and [Ag(HIO₆)₂(OH)(H₂O)]^2?; these two Ag(III) species are reduced by pyrrolidine in parallel rate-determining steps. The rate equation derived from the proposed mechanism can explain the experimental observations. The rate constants of the rate-determining steps, together with the associated activation parameters, were calculated accordingly.     

结合三维静电势参数研究化合物溶解度与溶剂分子结构间的定量关系

对一系列溶剂分子进行了结构优化和静电势及其导出参数的计算,运用多元线 性回归方法对10种化合物萘、菲、蒽、联苯、苊、六氯苯、苯偶酰、噻吨-9-酮、 二苯砜和敌草隆的溶解性能与溶剂分子的结构参数进行了关联。结果表明：分子表 面最正和最负的静电势V_(s,max)和V_(s,min)、电荷分离度Π以及分子的静电相互 作用趋势量τ这四个三维静电势参数,加上分子的前线轨道能级ε_(HOMO)和ε_ (LUMO)能很好地用于表达这些化合物在不同纯溶剂中的溶解度与溶剂分子结构间的 定量关系。     

高质量AlPO4-5分子筛单晶的螯合剂法合成与表征

考察了几种螯合剂对AlPO4-5分子筛单晶合成的影响，结果表明，用邻苯二酚，乙酰丙酮，水杨醛为螯合剂可以得到高质量的，尺寸较大的分子筛单晶，其作用机理可能与它们加入到分子筛合成体系中，改变了溶胶中铝的配位数或产生了铝的螯合物有关。