催化光度法测定痕量铁

基于铁对过氧化氢氧化对-氨基二甲基苯胺盐酸盐的催化活性,建立了测定痕量的新方法。灵敏度为1.6×10-11g/mL,测定范围为0～0.50μg Fe/50mL,用于测定几种实物样品中的痕量铁,相对标准偏差0.65～2.6%.     

C60在几种溶剂中紫外吸光度的负热效应

所采用的变温光谱差减方法是将待测试样分成两份 ,一份作为参比试样 ,恒定在某一温度 (参比温度 )下 ,另一份作为待测样品 ,选定另一待观测温度 ,在一定的波长范围内 ,用岛津UV 2 4 0型紫外 可见双光束分光光度计扫描 ,获得紫外吸收温差光谱 (UVSDT)。选择不同的温度差 ,测得温差光谱随温差的变化。观测了C60 分子在乙醇、环己烷、正己烷、异丙醇等几种有机溶剂中吸光度随温度的变化。观测结果发现C60 溶液的吸光度变化存在显著的负温度效应。C60 的UV吸收光谱峰随试样温度升高而降低 ,UV吸收温差光谱 (U VSDT)为负峰 ,UVSDT峰强随温差增大而负向增大。说明C60 的结构对温度有较强的依赖关系。这种依赖关系与π π 电子跃迁类型密切相关。实时现场测量C60 溶液的吸光度随温度变化规律 ,对分离、纯化、分析富勒烯 ,认识C60 特性、研究以溶剂为媒介的化学反应机理 ,以及提高测量的准确度和重现性等 ,均有一定的理论意义和实用价值     

LD side-pumped Nd:GGG CW laser operating at 1110 and 1105 nm dual wavelengths and 1110 nm single wavelength

A diode-side-pumped continuous-wave Nd:GGG laser operating at dual-wavelength (1110 and 1105 nm) and single wavelength of 1110 nm is demonstrated for the first time. The maximum output power of the 1110 and 1105 nm dual-wavelength operation is 13.2 W. By adjusting the orientation of an insertion mirror, the relative intensities of the two wavelengths can be changed. Thus single wavelength operation at 1110 nm is obtained, and the output power is 9.6 W.     

Effect of viscous damping on power transmissibility for the vibration isolation of building services equipment

Vibration isolation plays an important role in both the vibration and noise control of building services equipment. To evaluate vibration isolation performance, the force transmissibility method is commonly adopted. However, increasing the damping effect in the force transmissibility method reduces both the resonance peak value and the isolation performance in the “isolation region”. The limitation of the method is that the transmitted displacement of a floor structure and the interaction of mounting points are neglected. To include the floor displacement and the interaction of mounting points, Mak and Su recently proposed the power transmissibility method to assess the performance of vibration isolation. In this paper, the effect of viscous damping on power transmissibility is investigated. A practical procedure for experimentally determining the damping ratio is also given.     

Efficient and stable single-dopant white OLEDs based on 9,10-bis (2-naphthyl) anthracene

Efficient white organic light-emitting diodes (WOLEDs) are fabricated with a thin layer of 9,10-bis (2-naphthyl) anthracene (ADN) doped with Rubrene as the source of white emission. A device with the structure of ITO/NPB (70 nm)/ADN: 0.5% Rubrene (30 nm)/Alq₃ (50 nm)/MgAg shows a maximum current efficiency of 3.7 cd/A, with the CIE coordinates of x=0.33, y=0.43. The EL spectrum of the devices and the CIE coordinates remains almost the same when the voltage is increased from 10 to 15 V and the current efficiency remains quite stable with the current density increased from 20 to 250 mA/cm².     

Evaluation of micro-bubble size and gas hold-up in two-phase gas-liquid columns via scattered light measurements

In this paper, potential use of an elliptically polarized light scattering (EPLS) method to monitor both bubble size and gas hold-up in a bubble-laden medium is explored. It is shown that with the use of the new EPLS system, normalized scattering matrix elements (M_ij's) measured at different side and back-scattering angles can be used to obtain the desired correlations between the bubble sizes and input flow parameters for a gas-liquid (GL) column, including gas flow rate and surfactant concentrations. The bubble size distributions were first evaluated experimentally using a digital image processing system for different gas flows and surfactant concentrations. These images showed that the bubbles were not necessarily spherical. We investigated the possibility of modeling the bubbles as effective spheres. The scattering matrix elements were calculated using the Lorenz-Mie theory and the results were compared against the experimentally determined values. It was observed that the change in the bubble size yields significant changes in M₁₁, M₃₃, M₄₄, and M₃₄ profiles. An optimum single measurement angle of θ=120^° was determined for a gas velocity range of 0.04-0.35 cm/s (). The choice of the optimum angle depends on frit pore size, column diameter, gas pressure, and surfactant concentration. These results suggest that a simplified version of the present EPLS system can effectively be used as a two-phase flow sensor to monitor bubble size and liquid hold-up in industrial systems.     

The circular and elliptic white-light dark spatial solitons in a photovoltaic self-defocusing nonlinear medium

We observed circular white-light dark spatial solitons in photovoltaic self-defocusing LiNbO₃:Fe crystal using an ordinary incandescent lamp as light source (a line source) with the filament of the bulb parallel to the crystalline c axis. Besides the above condition, the formation of the elliptic soliton needs an additive condition that the crystalline c axis is parallel to the minor axis of dark elliptic spot.     

A new energy source originating from extra dimensions

In this work the Einstein gravitational field equations and the Lichnerowicz boundary formalism in the extra dimensions are used to build up our black hole model from 6-dimensional space－time. From the internal stress－energy tensor the solutions with energy levels and semiclassical space-quantization are obtained, which combines with only one metric condition outside the defect. We show a new type of energy source, which originates from extra dimensions. A part of the energy source of quasi-stellar object (QSO) maybe come from extra dimensions in that way. The theoretical arithmetic upper limit is identical to that of the output energy of QSO.     

新颖的微流控电调谐空间光开关

提出了一种微流控电调谐非机械空间光开关器件,该器件的基本形式为“光输入阵列+光交换空间+光输出阵列”的结构,采用“水/油/水”液体棱镜作为偏光控制单元.在特定电压范围（30~110 V）内,通过电润湿效应作用的液体棱镜光束偏转角可在约－15°~15°之间连续可调.由此可构造多种平面甚至立体光开关阵列.