PPC/SBR并用弹性体的配方选择

利用正交法对丁苯橡胶（SBR）／聚丙撑碳酸酯（PPC）共混弹性体进行配方设计，得到了一个具有良好综合性能的配方。并通过方差分析得出PPC含量和马来酸酐（MA）用量是影响弹性体拉伸性能的最显著因素。     

Determination of medecamycin by adsorptive stripping voltammetry with an activated electrode

The adsorptive and electrochemical behaviors of medecamycin were investigated on a glassy carbon electrode (GCE) pretreated by anodic oxidation at +1.8 V for 5 min in 0.025 mol l^–1 NH₃-NH₄Cl (pH 8.6) solution. An adsorptive stripping voltammetric method for the determination of medecamycin at the pretreated glassy carbon electrode has been developed. Medecamycin was accumulated in NH₃-NH₄Cl buffer (pH 9.0) at a potential of –0.7 V (vs. saturated calomel electrode (SCE)) for a certain time, and then determined by second-order differential anodic stripping voltammetry. The second-order differential anodic stripping peak current at +0.72 V was proportional to the concentration of medecamycin in the range 2.0 g ml^–1 to 50.0 g ml^–1. The detection limit (three times the signal-to-noise) was 1.0 g ml^–1 and the relative standard deviation of the results was 3.28% for eight successive determinations of 10.0 g ml^–1 medecamycin. This method has been applied to the direct determination of medecamycin in commercial tablets and spiked urine samples with satisfactory results.     

流动注射在线阴离子树脂预富集火焰原子吸收测定痕量铜

研究了以阴离子交换树脂作吸附剂的流动注射在线微柱预富集火焰原子吸收测定铜的新方法。在最佳条件下富集１５０ｓ，富集２３倍，检出限０．２μｇ／Ｌ，ＲＳＤ为１．６％，分析速度２０次／ｈ。天然水样中可能存在的离子不干扰铜的测定。所建立的方法已用于水样中痕量铜的测定。     

Synthesis and structure of Ca(18)Li(5)In(25.07): a novel intergrowth of Li-centered in(12) icosahedral clusters and electron-precise Zintl layers

A new ternary polar intermetallic, Ca(18)Li(5)In(25.07), was obtained from high-temperature reactions of the elements in welded Nb tubes. Its crystal structure, established by single-crystal X-ray diffraction, was found to crystallize in the orthorhombic space group Cmmm (No. 65). Unit cell parameters are a = 9.9151(6) A, b = 26.432(2) A, and c = 10.2116(6) A; Z = 2. The structure of Ca(18)Li(5)In(25.07) features two distinct types of indium anionic layers. An "electron-deficient" layer is made up of Li-centered In(12) icosahedra that are interconnected by bridging planar In(4) units and In atoms. A second In(3)(5-) layer is an electron-precise Zintl layer formed by fused four-, five-, and six-membered rings of three- and four-bonded indium atoms. The two distinct layers are alternately stacked and linked into a complex three-dimensional network. Vacancies are observed to occur only at the In(12) icosahedral and the bridging indium units within the "electron-deficient" layers. Magnetic property measurements indicate that Ca(18)Li(5)In(25.07) exhibits temperature-independent paramagnetism consistent with metallic behavior. Band structure calculations were performed to elucidate the role of defects and vacancies in the electronic structure of the electron-deficient "metallic" Zintl phase.     

铜在HOPG上电沉积过程的现场ECSTM研究

用自制的电化学扫描隧道显微镜（ＥＣＳＴＭ）现场研究Ｃｕ在ＨＯＰＧ上的电沉积过程．结果表明Ｃｕ在ＨＯＰＧ上的电沉积为三维成核的过程．当电位较低或Ｃｕ２＋离子浓度较低时，铜在本体金属生长主要沿着台阶方向．过电位较高时，铜的成核数目增加，沉积层的晶粒有所细化．同时，非现场ＥＣＳＴＭ比较研究表明，ＳＴＭ针尖对针尖局部区域的电沉积起屏蔽作用，针尖所在区域Ｃｕ的沉积速度比其它区域明显减小     

SSCH3光解离的多参考理论计算

摘要运用多参考微扰理论(Multireference MΦller-Plesset theory)计算了SSCH3垂直激发能及其S-C与S-S两种断键方式的绝热(Adiabatic)与非绝热(Diabatic)的基态和激发态势能曲线, 研究了在193nm激光作用下SSCH3的光解离过程, 理论计算值与实验值相符.     

Self-assembled hybrid nanofibers confer a magnetorheological supramolecular hydrogel

Most magnetorheological materials, composed of magnetic microparticles in a liquid, require significant amounts of magnetic particles and a large magnetic field to achieve the desired effects. Here, we report on a new type of magnetorheological materials consisting of small amounts of magnetic nanoparticles (0.8 wt %) but exhibiting large rheological change (i.e., a gel-sol transition) upon the application of a small magnetic field. We use self-assembly to create hybrid nanofibers, which consist of supramolecular hydrogelators and magnetic nanoparticles, as the matrices of the hydrogel. Localized in the nanofibers at a distance of 1-2 nm, the magnetic nanoparticles occupy a small volume fraction of the hydrogel, significantly enhancing the magnetic dipole interactions between them, which results in the large magnetoresponse. This strategy generates a hierarchical nanostructure and eliminates several drawbacks of the simple mixture of polymers with nanoparticles, and thus provides a new methodology that uses magnetic force to control the nanostructures and properties of soft materials.     

Kinetic study of copper(II) complexation with 9-ethyl-3-carbazolecarboxaldehyde-thiosemicarbazone and kinetic-spectrophotometric determination of copper(II)

The kinetics of complexation reaction of Cu(II) with 9-ethyl-3-carbazolecarboxaldehyde-thiosemicarbazone (ECCAT) has been examined spectrophotometrically. The ligand was synthesized for the first time. The complexation reaction was carried out in a DMF-water medium at 35°C. The complex has maximum absorbance at 393 nm. Kinetic and activation parameters of the complexation reaction were calculated by the Arrhenius and Eyring equations using the data obtained from investigating the effect of temperature on reaction rates under the specified conditions. We also proposed reaction rate equations. Based on the studied complexation reaction, a simple kinetic method for the spectrophotometric determination of copper(II) has been developed. The calibration graphs are linear in the concentration range 0.2–1.9 μg/mL. The species that caused interference were investigated. The text was submitted by the authors in English.     

Liquid chromatography/electrospray tandem mass spectrometry method for the quantitation of fosinoprilat in human serum using automated 96-well solid-phase extraction for sample preparation

A sensitive, specific, accurate and reproducible liquid chromatography/electrospray tandem mass spectrometry method was developed and validated for the quantitation of fosinoprilat in 0.2 mL of human serum. The method employed acidification (with pH 4.0 sodium acetate buffer) of the serum samples to minimize the hydrolysis of the prodrug fosinopril to fosinoprilat prior to purification by automated 96-well solid-phase extraction. The required chromatographic separation of fosinoprilat and fosinopril was achieved isocratically on a Luna C8 analytical column (2 x 50 mm, 3 microm). The total run time was 2 min. The mobile phase contained methanol and water with 10 mM ammonium acetate. Detection was by positive ion electrospray tandem mass spectrometry. The standard curve, which ranged from 2.00 to 500 ng/mL, was fitted to a 1/x(2) weighted linear regression model. Fosinoprilat quality control (QC) samples used to determine the accuracy and precision of the method were prepared in human serum at concentrations of 5.00, 200, 400 and 1000 ng/mL. The assay accuracy was within 8% (dev). The intra- and inter-assay precisions were within 6 and 3% (RSD), respectively. Fosinopril QC samples used to gauge the rate of hydrolysis of fosinopril to fosinoprilat during the assay procedure were prepared in human serum at 500 ng/mL. The hydrolysis of fosinopril to fosinoprilat was 相似文献