紫外光对MCP增益特性测量的影响

介绍用ＵＶ光电法测量ＭＣＰ电子增益时，ＵＶ透过金薄膜的附加输出给测量带来的影响，给出了实验结果并进行初步分析，最后指出确保增益测量结果可靠性的途径。     

相变及空位缺陷对高压下GeO_2光学性质的影响

本文采用第一性原理方法,在100 GPa的压力范围内,计算了GeO_2理想晶体和含锗、氧空位点缺陷晶体的光学性质.吸收谱数据表明,压力诱导的三个结构相变对GeO_2晶体的吸收谱均有影响:第一个相变将导致其吸收边蓝移,而第二和第三相变将使得其吸收边红移.锗和氧空位点缺陷的存在将导致GeO_2的吸收边红移,但氧空位点缺陷引起的红移更明显.尽管如此,分析发现,在100 GPa的压力范围内,压力、相变以及空位点缺陷等因素都不会导致GeO_2晶体在可见光区出现光吸收现象(是透明的).波长在532 nm处的折射率数据显示,在GeO_2的四个相区,其折射率均随压力增加而降低;而且,GeO_2的三个结构相变以及锗、氧空位点缺陷都会导致其折射率有所增大.本文预测,GeO_2有成为冲击光学窗口材料的可能.     

The Selmer Groups of Elliptic Curves

Let E/K be an elliptic curve with K-rational p-torsion points.The p-Selmer group of E is described by the image of a map λk and hence an upper bound of its order is given in terms of the class numbers of the S-ideal class group of K and the p-division field of E.     

K9和石英玻璃基片上Au膜真空紫外反射特性研究

采用离子束溅射法,分别在经过不同前期清洗方法处理过的K9及石英玻璃光学基片上,选择不同的镀膜参量,镀制了多种厚度的Au膜。对镀制的Au膜在真空紫外波段较宽波长范围内的反射率进行了连续测量。测试结果表明:辅助离子源的使用方式、Au膜厚度对反射镜的反射率有重大影响。基片材料、镀前基片表面清洗工艺等对反射率也有一定影响。采用镀前离子轰击,可显著提高Au膜反射率及膜与基底的粘合力;获得最高反射率时的最佳膜厚与基片材料、镀膜工艺密切相关。对经过离子清洗的石英基片,膜厚在30 nm左右反射率最高;比较而言,石英基片可获得更高的反射率;辅助离子源的使用还显著影响获得最高反射率时对应的最佳膜厚值,且对K9基片的影响更显著。     

Polarisation characteristics of a 12 fibre coupler under femtosecond pulsed and continuous wave illumination

We report on the experimental investigation carried out in the polarisation characteristics of femtosecond pulsed and continuous wave beams propagating through a 1×2 fibre coupler. It is demonstrated that the polarisation states of pulsed and continuous wave illumination over the broad wavelength range can be preserved in a conventional fused fibre coupler. Furthermore, the fibre coupler acts as a low-pass spectral filter in the visible wavelength range with a splitting ratio between 99.6/0.4 and 99.7/0.3. The result is of importance for fibre-optic second harmonic generation microscopy which requires the polarisation preservation to extract molecular organization of a sample.