Electrochemical milling and faceting: size reduction and catalytic activation of palladium nanoparticles

Improved performance through milling: A method for enhancing the catalytic activity of supported metal nanoparticles is reported. This method enhances the activity for the ethanol electro-oxidation of a supported palladium catalyst. The much higher catalytic performance is ascribed to the increased electrochemically active surface area as well as the generation of high-index facets at the milled nanoparticle surface.     

Experimental electron density of sumanene, a bowl-shaped fullerene fragment; comparison with the related corannulene hydrocarbon

The experimental electron density of sumanene, C(21)H(12), was extracted from a high resolution X-ray data set measured at 100 K and topologically analyzed. In addition to bond topological and atomic properties, information about the density distribution between adjacent molecules, which show close C···C approaches of ~3.4 ? within the columnar π-stacks in the crystal lattice, are discussed. A comparison is made with the electron density of the related corannulene molecule based also on the analysis of Electron Localizability Indicator (ELI-D) calculations.     

“Click” on Tubes: a Versatile Approach towards Multimodal Functionalization of SWCNTs

Organic functionalization of carbon nanotube sidewalls is a tool of primary importance in material science and nanotechnology, equally from a fundamental and an applicative point of view. 1 , 2 Here, an efficient and versatile approach for the organic/organometallic functionalization of single‐walled carbon nanotubes (SWCNTs) capable of imparting multimodality to these fundamental nanostructures, is described. Our strategy takes advantage of well‐established Cu‐mediated acetylene‐azide coupling (CuAAC) reactions applied to phenylazido‐functionalized SWCNTs for their convenient homo‐/heterodecoration with a number of organic/organometallic frameworks, or mixtures thereof, bearing terminal acetylene pendant arms. Phenylazido‐decorated SWCNTs were prepared by chemoselective arylation of the CNT sidewalls with diazonium salts under mild conditions, and subsequently used for the copper‐mediated cycloaddition protocol in the presence of terminal acetylenes. The latter reaction was performed in one step by using either single acetylene derivatives or equimolar mixtures of terminal alkynes bearing either similar functional groups (masked with orthogonally cleavable protecting groups) or easily distinguishable functionalities (on the basis of complementary analytical/spectroscopic techniques). All materials and intermediates were characterized with respect to their most relevant aspects/properties by TEM microscopy, thermogravimetric analysis coupled with MS analysis of volatiles (TG‐MS), elemental analysis, cyclic voltammetry (CV), Raman and UV/Vis spectroscopy. The functional loading and related chemical grafting of both primary amino‐ and ferrocene‐decorated SWCNTs were spectroscopically (UV/Vis, Kaiser test) and electrochemically (CV) determined, respectively.     

Comparison of two extraction methods for the determination of selective serotonin reuptake inhibitors in sewage sludge by hollow fiber liquid-phase microextraction

This paper presents two procedures for the determination of four selective serotonin reuptake inhibitors (citalopram, paroxetine, fluoxetine, and sertraline) and one metabolite (norfluoxetine) in sewage sludge utilizing three-phase hollow fiber liquid-phase microextraction (HF-LPME). First, direct HF-LPME was used for extraction, clean-up, and preconcentration. The pharmaceuticals were extracted from slurry samples into an organic phase and then back-extracted into an aqueous phase in the lumen of the hollow fiber. Second, a procedure combining pressurized hot water extraction and HF-LPME for clean-up and preconcentration was developed for the same analytes and matrix. The extracts were subsequently analyzed by liquid chromatography-mass spectrometry. For direct HF-LPME, limits of detection were between 1 and 12 ng g(-1) (dry weight) and the relative standard deviation (RSD) values were 3-12%. For the second method, limits of detection were approximately 6 ng g(-1) for all the compounds and RSD values were 8-12%. The methods were validated by comparison of results for the same samples. Sewage sludge from a Swedish wastewater treatment plant was analyzed by both methods; average concentrations were similar for citalopram, paroxetine, and fluoxetine with values of approximately 530, 40, and 200 ng g(-1) , respectively.     

Optimization of QuEChERS method for the analysis of organochlorine pesticides in soils with diverse organic matter

A QuEChERS method has been developed for the determination of 14 organochlorine pesticides in 14 soils from different Portuguese regions with wide range composition. The extracts were analysed by GC-ECD (where GC-ECD is gas chromatography-electron-capture detector) and confirmed by GC-MS/MS (where MS/MS is tandem mass spectrometry). The organic matter content is a key factor in the process efficiency. An optimization was carried out according to soils organic carbon level, divided in two groups: HS (organic carbon >2.3%) and LS (organic carbon <2.3%). The method was validated through linearity, recovery, precision and accuracy studies. The quantification was carried out using a matrix-matched calibration to minimize the existence of the matrix effect. Acceptable recoveries were obtained (70-120%) with a relative standard deviation of ≤16% for the three levels of contamination. The ranges of the limits of detection and of the limits of quantification in soils HS were from 3.42 to 23.77 μg kg(-1) and from 11.41 to 79.23 μg kg(-1), respectively. For LS soils, the limits of detection ranged from 6.11 to 14.78 μg kg(-1) and the limits of quantification from 20.37 to 49.27 μg kg(-1) . In the 14 collected soil samples only one showed a residue of dieldrin (45.36 μg kg(-1) ) above the limit of quantification. This methodology combines the advantages of QuEChERS, GC-ECD detection and GC-MS/MS confirmation producing a very rapid, sensitive and reliable procedure which can be applied in routine analytical laboratories.     

Monitoring metabolites consumption and secretion in cultured cells using ultra-performance liquid chromatography quadrupole–time of flight mass spectrometry (UPLC–Q–ToF-MS)

Here we present an ultra-performance liquid chromatography–mass spectrometry (UPLC–MS) method for extracellular measurements of known and unexpected metabolites in parallel. The method was developed by testing 86 metabolites, including amino acids, organic acids, sugars, purines, pyrimidines, vitamins, and nucleosides, that can be resolved by combining chromatographic and m/z dimensions. Subsequently, a targeted quantitative method was developed for 80 metabolites. The presented method combines a UPLC approach using hydrophilic interaction liquid chromatography (HILIC) and MS detection achieved by a hybrid quadrupole–time of flight (Q–ToF) mass spectrometer. The optimal setup was achieved by evaluating reproducibility and repeatability of the analytical platforms using pooled quality control samples to minimize the drift in instrumental performance over time. Then, the method was validated by analyzing extracellular metabolites from acute lymphoblastic leukemia cell lines (MOLT-4 and CCRF-CEM) treated with direct (A-769662) and indirect (AICAR) AMP activated kinase (AMPK) activators, monitoring uptake and secretion of the targeted compound over time. This analysis pointed towards a perturbed purine and pyrimidine catabolism upon AICAR treatment. Our data suggest that the method presented can be used for qualitative and quantitative analysis of extracellular metabolites and it is suitable for routine applications such as in vitro drug screening.     

Biodegradation studies of <Emphasis Type="Italic">N</Emphasis><Superscript>4</Superscript>-acetylsulfapyridine and <Emphasis Type="Italic">N</Emphasis><Superscript>4</Superscript>-acetylsulfamethazine in environmental water by applying mass spectrometry techniques

This work evaluates the biodegradation of N ⁴-acetylsulfapyridine (AcSPY) and N ⁴-acetylsulfamethazine (AcSMZ), metabolites of two of the most commonly used sulfonamides (SAs) in human and veterinary medicine, respectively. Aerobic transformation in effluent wastewater was simulated using aerated fixed-bed bioreactors. No visible changes in concentration were observed in the AcSMZ reactor after 90 days, whereas AcSPY was fully degraded after 32 days of experiment. It was also demonstrated that AcSPY transformed back to its parent compound sulfapyridine (SPY). The environmental presence of these two metabolites in wastewater effluent had been previously investigated and confirmed, together with three more SA acetylated metabolites and their corresponding parent compounds, in 18 different wastewater treatment plants in Hesse (Germany). Sulfamethoxazole (SMX) and SPY were the two SAs detected most frequently (90% and 89% of the samples, respectively) and in the highest concentrations (682 ng L⁻¹ for SMX and 532 ng L⁻¹ for SPY). To conclude, hazard quotients were calculated whenever toxicity data were available. None of the SAs studied posed an environmental risk.     

Chitosan/anionic surfactant microparticles synthesized by high pressure spraying method for removal of phenolic pollutants

Biopolymeric microparticles were prepared by rapid expansion of high pressure CO₂-chitosan (Chi) solution in sodium bis-(2-ethyl hexyl) sulfosuccinate (AOT) solution. At pressures higher than 2 MPa, ultrafine particles were formed while under this value, wires were obtained. The formation of Chi/AOT complex was confirmed by Fourier Transform Infrared (FTIR) Spectroscopy, whereas scanning electron microscopy was used to characterize the morphology, size and shape of the particles. The FTIR spectrum proved the interaction between the sulfonate groups of AOT and the amino groups of Chi. Microparticles are quasi-spherical in wet conditions and irregular after freeze drying, presenting a rough surface with many pores. Lyophilized hydrophobic microparticles were used to remove phenol and o-cresol from aqueous solution, and the adsorption process showed a maximum efficiency in the 7–8 pH range. The uptake of phenol and o-cresol increased with the amount of particles and decreased with increasing the pollutant concentration. The adsorption occurred rapidly in the first 60–120 minutes, and leveled off thereafter.      

β-Nitro-5,10,15-tritolylcorroles

Functionalization of the β-pyrrolic positions of the corrole macrocycle with -NO(2) groups is limited at present to metallocorrolates due to the instability exhibited by corrole free bases under oxidizing conditions. A careful choice of the oxidant can limit the transformation of corroles into decomposition products or isocorrole species, preserving the corrole aromaticity, and thus allowing the insertion of nitro groups onto the corrole framework. Here we report results obtained by reacting 5,10,15-tritolylcorrole (TTCorrH(3)) with the AgNO(2)/NaNO(2) system, to give mono- and dinitrocorrole derivatives when stoichiometry is carefully controlled. Reactions were found to be regioselective, affording the 3-NO(2)TTCorrH(3) and 3,17-(NO(2))(2)TTCorrH(3) isomers as the main products in the case of mono- and disubstitution, in 53 and 20% yields, respectively. In both cases, traces of other mono- and disubstituted isomers were detected, which were structurally characterized by X-ray crystallography. The influence of the β-nitro substituents on the corrole properties is studied in detail by UV-visible, electrochemical, and spectroelectrochemical characterization of these functionalized corroles. Density functional theory (DFT) and time-dependent DFT (TDDFT) calculations of the ground and excited state properties of these β-nitrocorrole derivatives also afforded significant information, closely matching the experimental observations. It is found that the β-NO(2) substituents conjugate with the π-aromatic system of the macrocycle, which initiates significant changes in both the spectroscopic and redox properties of the so functionalized corroles. This effect is more pronounced when the nitro group is introduced at the 2-position, because in this case the conjugation is, for steric reasons, more efficient than in the 3-nitro isomer.     

The thermal study of oxyfluoride glass with strontium fluoride

A thulium (Tm 3+) doped oxyfluoride glass ceramic containing SrF2 nanocrystals has been presented. Transparent glass ceramic was obtained by heat treating the glass from the SiO2-Al2O3-ZnO-SrF2 system at the first crystallization temperature. Cerammization of glass was studied by DTA/DSC, XRD and SEM methods. It has been found that nanocrystallization of SrF2 strongly depends on the ratio between the components and amount of SrF2. Moreover the rare earth dopant Tm3+ influenced on the thermal properties of glass. The formation of SrF2 nanocrystals in glass ceramic was confirmed by X-ray diffraction. X-ray diffraction analysis of the transparent glass ceramic revealed that the SrF2 nanocrystals are precipitated in the glass matrix. Analysis of the local atomic interactions in the structure of oxyfluoride glass has been used to explain the course of the crystallization.