Solid-phase extraction-liquid chromatography-fluorimetry for organotin speciation in natural waters

Summary A method is reported for the determination of dibutyltin (DBT), diphenyltin (DPhT), tributyltin (TBT), and triphenyltin (TPhT) species at the nanogram per litre concentration level in natural water samples. Analytes were isolated from samples by solid-phase extraction and analysed both off-line and on-line by reversed-phase high-performance liquid chromatography with post-column derivatization and fluorimetric detection. Several SPE cartridges and eluents were evaluated; C₁₈ enrichment and elution with a mixture of methanol, acetic acid, and water was found most suitable. Preconcentration factors up to 250 can be achieved when a 500-mL sample is processed. Detection limits, recovery rates, and the precision of the whole process have been determined. The method has been applied to the determination of organotin species in spiked natural water samples collected on the NW Mediterranean coast. Recovery rates range from 75 to 110% and detection limits are at the low ng L⁻¹ level (1–3 ng Sn L⁻¹ for DPhT, DBT, and PhT and 40 ng Sn L⁻¹ for TBT when 250 mL spiked sea water is processed.)     

Kinetics of the manganese(III)-oxalate reaction in acidic sulphate media

The kinetics of the reaction of manganese(III) with oxalic acid (OA) has been studied in H₂SO₄ solutions. Under the experimental conditions of 6 × 10^–3 <>₀ < 0.4=" mol=">^–3 and [H₂SO₄]₀ 0.2 mol dm^–3 the observed pseudo-first order rate constant k _obs follows the expression

Application of multicomponent spectrophotometry to analytical control of electroplating solutions

Summary A procedure for the simultaneous spectrophotometric determination of organic additives and the quantitation of Ni(II) in Zn-Ni electrolytic baths is described. Organic additives were determined by resolving the mixed spectrum over the wavelength range 278–330 nm by applying a least-squares fitting computational program to the standard spectrum of each component. Spectra were recorded on a hydroalcoholic medium (15% methanol) containing 0.1 mol/l NH₄Cl. The Ni(II) concentration was determined by applying the program to the first-derivative spectrum over the wavelength range 660–820 nm.     

Cyanato-copper(II) complexes with organic ligands,Part XXIII. Properties and structure characterization of cyanato-copper(II) complexes with aminopyridines

Summary New cyanato-copper(II) complexes with aminopyridines (ampy) were prepared and studied;viz. Cu(NCO)₂(3-ampy)₂ (- and -form), Cu(NCO)₂(3-ampy)₂(H₂O), Cu(NCO)₂(4ampy)₂, and Cu(NCO)₂(2-ampy). According to physical results, the Cu(NCO)₂L₂ complexes exhibitpseudo-octahedral structures with amine nitrogens or cyanate oxygens occupying axial sites. For - and -Cu(NCO)₂(3-ampy)₂ the crystal structure reorganization is connected with a change in axial distortion. The compound Cu(NCO)₂(2-ampy) is square pyramidal or — more probably — rhombic octahedral and its strong antiferromagnetism reveals the N-bridging function of the NCO groups.Part XXII, Ref. 9.     

Conformation of bicyclo [n.1.0] Derivatives: Part 3. Dioxa- and trioxa-bicyclo[5.1.0] octanes

The conformational geometries and possible interconversion paths for some oxa derivatives of bicyclo[5.1.0] octane have been studied by the molecular mechanics method. The theoretical results are compared with the experimental data for the molecular geometry of bicyclo[5.1.0] octane and 3,5,8-trioxabicyclo[5.1.0] octane, the free energy of activation for cycloheptene epoxide and 3,5-dioxabicyclo[5.1.0] octane, the dipole moments and molar Kerr constants in solution for cycloheptene epoxide, 3,5-dioxa- and 3,5,8-trioxabicyclo[5.1.0] octane.     

The extraction of HCl by TDPO in benzene

The results of the extraction of HCl by TDPO in benzene and the co-extraction of water are discussed. From the infrared spectra of normal (HCl-H₂O) and deuterated (DCl-D₂O) systems it may be concluded that TDPO·HCl·H₂O is formed in the organic phase on extraction from aqueous solutions with c_HCl≤5M, and TDPO·HCl with c_HCl>5M. Compounds such as TDPO·2HCl are found in the organic phase if there is an excess of HCl in the organic phase. From cryoscopic and viscosity measurements of the organic phase, conclusions can be made about the presence of polymeric compounds in this phase.     

Validation of an analytical method to determine trace metal impurities in fluoride compounds by flame atomic absorption spectroscopy

 The development of an analytical method for the determination of some heavy metals (Fe, Cu, Co, Zn and Ni) in fluoride compounds [Cu(BF₄)₂, Sn(BF₄)₂, Pb(BF₄)₂ and HBF₄] by flame atomic absorption spectroscopy is described. This method is to be used as a routine analytical method in an industrial quality control laboratory. To this end the "performance characteristics" of an instrumental analytical method such as matrix effects, sensitivity, linearity, detection and quantitation limits, precision and accuracy were evaluated for every system under study. The results of these investigations showed that non-spectral interferences (due to the presence of large concentrations of major metals such as Cu, Sn and Pb) were observed. Nevertheless it was possible to define a matrix concentration interval where matrix effects were not statistically significant, and therefore a direct calibration approach could be used as the calibration tool whenever the major metal concentration was not higher than 40×10^–3 kg l^–1. A guide to the developement of an analytical method for trace metal determination is provided. General tools for quality control have been used in order to show how an analytical method can be tested daily and evaluated in a convenient manner. Received: 29 January 1997 Accepted: 11 March 1997     

Synthesis and properties of 1-(6-methoxy)-2-benzothiazolyl)-2-pyridones

Substituted ]-(6-methoxy-2-benzothiazolyt)-2-pyridones were prepared from 2-amino-6-methoxybenzathiazate through N-(6-methoxy-2-benzothiazotyl) cyanvorearmileaznd-3-aryl-N-(6-methoxy-2-benzothiazolyt)-2-cyano-2-propenamides. The cyclization of the latter with malonodinitrile in the presence of piperidine gave the corresponding pyridones. The structures of the synthesized compounds were confirmed by¹H NMR and mass spectral data.Department of Organic Chemistry, Mass Spectrometry Laboratory, Slovak Technical University, 812 37 Bratislava, Slovakia. Published in Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1402–1404, October, 1995. Original article submitted August 24, 1995.     

On-line sorbent extraction, preconcentration and determination of lead by atomic absorption spectrometry

A method for the quantitative preconcentration of lead based on an existing batch process was developed for implementation in a flow system including a flame AAS detector. Lead can be quantitatively preconcentrated as pyrrolidinedithiocarbamate or dithizonate on an activated carbon minicolumn. The chelates are eluted in methyl isobutyl ketone and introduced directly into the nebuliser-burner. An enrichment factor of 50 is typically obtained for a preconcentration time of 2 min (lead can be determined at concentrations between 15 and 400 ng/ml), which results in a throughput of ca. 25 samples per hr. The sensitivity achieved with the two reagents is similar, but the selectivity provided by APDC exceeds that of dithizone. Based on the results obtained in the determination of lead in reference materials (minerals and skim milk), the proposed APDC method is applicable to real samples.     

UV photoelectron spectra of 5- and 6-azauracil

The He(I) photoelectron spectra of 5-azauracil (1,3,5-triazine-2,4(1H,3H)-dione) and 6-azauracil (1,2,4-triazine-3, 5(2H,4H)-dione) are presented. The spectra are assigned by using INDO/S calculations and comparison arguments with uracil. The first ionization energy in the title compounds is higher than in the usual nucleic acid bases.