CHLOROPHYLLS IN POLYMERS. I. STATE OF CHLOROPHYLL a IN UNSTRETCHED POLYMER SYSTEMS

Abstract— Model systems for the study of energy transfer processes are useful for the elucidation of the various factors governing the mechanism of energy transfer in photosynthetic systems. Here we describe the characterization of two systems, consisting of chlorophyll a incorporated in anhydrous nitrocellulose and polyvinylalcohol films. First, optical spectroscopy and time-resolved fluorescence techniques are used to characterize the state of the chlorophyll molecules in the films. We find that in nitrocellulose films the state of chlorophyll a depends strongly on the ratio of nitrocellulose to dimeth-ylsulfoxide in the solutions from which the films are cast. The state of chlorophyll a in polyvinylalcohol films does not depend on the amount of polymer originally dissolved in dimethylsulfoxide. In these films the pigment is monomeric at low concentrations of chlorophyll a, but aggregates are formed at much lower concentrations than in nitrocellulose. The latter fact is explained by the existence of pockets in polyvinylalcohol, leading to high local concentrations.
To further test the suitability of the nitrocellulose polymer films as model systems for energy transfer processes, time-resolved fluorescence anisotropy profiles are measured in dependence of the concentration of pigments in the matrix. Fits of the observed decay profiles to the predicted decay show good correspondence, as long as no traps are present. Furthermore, the fitted decay times yield the correct value of the Forster radius R₀ as compared to the value obtained spectroscopically. We thus conclude that the chlorophyll a-nitrocellulose system can be very appropriate for the study of energy transfer processes between photosynthetic pigment, since the pigments are uniformally distributed in the matrix.     

PHOTOSENSITIZATION OF MURINE TUMOR, VASCULATURE and SKIN BY 5-AMINOLEVULINIC ACID-INDUCED PORPHYRIN

Abstract— The effects of topical and systemic administration of 5-aminolevulinic acid (ALA) were examined in several murine tumor systems with regard to porphyrin accumulation kinetics in tumor, skin and blood, vascular and tumor cell photosensitization and tumor response after light exposure. Marked, transient increases in porphyrin levels were observed in tumor and skin after systemic and topical ALA. Rapid, transient, dose-dependent porphyrin increases were also observed in blood; these were pronounced after systemic ALA injection and mild after topical application. They were highest within 1 h after ALA injection, thereafter declining rapidly. This matched the clearing kinetics of injected exogenous protoporphyrin IX (PpIX). Initially, vascular photosensitivity changed inversely to blood porphyrin levels, increasing gradually up to 5 h post-ALA, as porphyrin was clearing from the bloodstream. This pattern was again matched by injected, exogenous PpIX. After therapeutic tumor treatment vascular disruption of the tumor bed, while observed, was incomplete, especially at the tumor base. Minimal direct tumor cell kill was found at low photodynamic therapy (PDT) doses (250 mg/kg ALA, 135 J/cm² light). Significant, but limited (<1 log) direct photodynamic tumor cell kill was obtained when the PDT dose was raised to 500 mg/kg systemic ALA, followed 3 h later by 270 J/cm², a dose that was however toxic to the animals. The further reduction of clonogenic tumor cells over 24 h following treatment was moderate and probably limited by the incomplete disruption of the vasculature. Tumor responses were highest when light treatment was carried out at the time of highest tumor porphyrin content rather than at the time of highest vascular photosensitivity. Tumor destruction did not reach the tumor base, regardless of treatment conditions.     

Limitations and perspectives in the determination of carbofuran with various liquid chromatography-mass spectrometry interfacing systems

Column liquid chromatography with mass spectrometric detection (LC-MS) has been widely accepted as the preferred technique for the identification and quantification of polar and thermally labile compounds at trace levels. Over the last decade many different types of LC-MS interfacing techniques have been used for the determination of carbamate pesticides and especially for the N-methylcarbamate carbofuran. This article addresses the difficulties encountered with the various types of LC-MS interface and discusses recent alternatives for the determination of carbofuran. With thermospray and particle beam interfaces the quantification of carbofuran is affected by both the ion source pressure and temperature, whereas quantification using the recently developed atmospheric pressure ionization interfaces, atmospheric pressure chemical ionization, electrospray, and ionspray, is less dependent on these parameters.     

Step structure in the atomic Kohn-Sham potential

In this work we analyze the exchange-correlation potentialv _xc within the Kohn-Sham approach to density functional theory for the case of atomic systems. The exchange-correlation potential is written as the sum of two potentials. One of these potentialsv _xc,scr is the long-range. Coulombic potential of the coupling constant integrated exchange-correlation hole which represents the screening of the two-particle interactions due to exchange-correlation effects. The other potentialv _xc,scr ^resp contains the functional derivative with respect to the electron density of the coupling constant integrated pair-correlation function representing the sensitivity of this exchange-correlation screening to density variations. As explicit expression of the exchange-part of this functional derivative is derived using an approximation for the Greens function of the Kohn-Sham system and is shown to display a distinct atomic shell structure. The corresponding potentialv _xc,scr ^resp has a clear step structure and is constant within the atomic shells and changes rapidly at the atomic shell boundaries. Numerical examples are presented for the Be and Kr atoms using the Optimized Potential Model (OPM).     

Simultaneous flow injection determination of ammoniacal nitrogen and chloride in industrial effluent water with a combined on-line gas diffusion/dialyser unit

An on-line gas diffusion/dialyser unit has been designed and incorporated into the manifold of a flow injection system for the simultaneous determination of two different species in a single sample injected into the FIA system. A fast and reliable fully automated two-component flow injection procedure has been carried out where a single sample (50 l industrial effluent water) is injected into a carrier stream and simultaneously gas diffused and dialysed in a single on-line gas diffusion/dialyser unit for the determination of ammonia and chloride, respectively. The results obtained for the ammoniacal nitrogen and chloride in industrial effluent water compared well with data obtained by standard methods. The relative standard deviation for industrial effluent water samples with concentrations of ammoniacal nitrogen in the range between 0.050 and 1 g/l and chloride from 0.127 to 2.531 g/l have been better than 1.0% for ammoniacal nitrogen and 0.5% for chloride, respectively. The proposed system could be attractive for routine analyses of industrial effluent water.     

Theoretical study of the triplet excited state of PtPOP and the exciplexes M-PtPOP (M = Tl, Ag) in solution and comparison with ultrafast X-ray scattering results

The [Pt₂(H₂P₂O₅)₄]⁴⁻ ions in the ground and excited states and the excited-state complexes M-[Pt₂(H₂P₂O₅)₄]³⁻ and M₂-[Pt₂(H₂P₂O₅)₄]²⁻ (M = Ag, Tl) were studied in solution with various density functional theory (DFT) functionals from Gaussian 09 and Amsterdam Density Functional (ADF) programs. Calculated results were compared with ultrafast X-ray solution scattering data. Time dependent DFT (TD-DFT) calculations with the B3PW91 functional and unrestricted open shell calculations with the mPBE functional produce good agreement with the experimental results. Compared to gas phase calculations, the surrounding solvent is found to play an important role to shorten the Pt-Pt and M-Pt (M = Ag, Tl) bond lengths, lowering the molecular orbital energies and influences the molecular orbital transitions upon excitation, which stabilizes the excited transient molecules in solution.     

Synthesis of poly(vinylidene chloride)-based composite latexes by emulsion polymerization from epoxy functional seeds for improved thermal stability

Poly(glycidyl methacrylate-co-butyl methacrylate)/poly(vinylidene chloride-co-methyl acrylate) (poly(GMA-co-BMA)/poly(VDC-co-MA)) composite latexes have been successfully synthesized via a two-stage emulsion polymerization process. In a first step, emulsion copolymerization of GMA and BMA was carried out in optimized conditions (low temperature, neutral pH, starved-feed conditions) to both limit the hydrolysis of epoxy groups and obtain small particle size (typically 30-50 nm size range). Composite latexes were then obtained by a second-stage seeded copolymerization of VDC and MA in the presence of tetrasodium pyrophosphate to control the pH and reach high molecular weight, leading to partial encapsulation of the seed particles (snow-man morphology, in agreement with theoretical expectations). Thermogravimetric analyses performed on the resulting composite particles showed that the epoxy-functionalized seed polymer behaved as an efficient thermal stabilizer of PVDC.     

Dechlorination of poly(vinyl chloride) by 1-butyl-3-methylimidazoliumhydroxide

Highly efficient dechlorination of PVC has been realized at 180 °C and at atmospheric pressure, using 1-butyl-3-methylimidazoliumhydroxide ([Bmim]OH) as an environment-friendly reaction medium: in the absence of an external base or solvent the dechlorination efficiency is as high as 91.2%, while it is only 38.1% for PVC without ionic liquids. The dechlorination process follows first-order kinetics with apparent activation energy of 44 kJ mol⁻¹. Mechanistic analysis provides evidence for the equilibrium presence of carbene species, together with the hydroxide ions in [Bmim]OH, thus enhancing the dechlorination of PVC via a combined elimination and substitution mechanism.