Flow-through optical fiber sensor for automatic sulfide determination in waters by multisyringe flow injection analysis using solid-phase reflectometry

A software-controlled flow-through optical fiber diffuse reflectance sensor capitalized on the implementation of disk-based solid-phase pre-concentration schemes in a multisyringe flow injection analysis (MSFIA) set-up is proposed for the trace determination of sulfide in environmental waters and wastewaters. The fully automated flowing methodology is based on Fischer's coupling reaction of sulfide with N,N-dimethyl-p-phenylenediamine (DMPD) in the presence of Fe(iii) as oxidizing reagent in a 0.5 M HCl medium. The on-line generated methylene blue dye is subsequently delivered downstream to a dedicated optode cell furnished with an octadecyl-chemically modified (C(18)) disk, while continuously recording the diffuse reflectance spectrum of the pre-concentrated compound. A double regeneration protocol is finally executed to warrant minimum background noise and negligible baseline. Under the optimized chemical and hydrodynamic conditions, the optosensing MSFIA method features coefficients of variation better than 0.7%(n= 10) at 50 microg l(-1) concentration, a linear working range of 20-200 microg l(-1) sulfide, a 3sigma(blank) detection limit of 2.9 microg l(-1) sulfide and an injection throughput of 8 h(-1) for a pre-concentration sample volume of 2.9 ml. The interfacing of the robust and versatile multisyringe flow injection-based optode with a plug-in spectrophotometer furnished with a light emitting diode assures the miniaturization of the overall flow analyzer, which is, thus, readily adaptable to real-time monitoring schemes. The potential of the multisyringe flow method was assessed via the determination of sulfide traces in water samples of different complexity (namely, freshwater, seawater and wastewater).     

A simple and very sensitive spectrophotometric method for the direct determination of copper ions

A sensitive spectrophotometric method for the direct determination of copper in aqueous samples without a preconcentration step has been developed. It is based on the formation of a yellow complex with the chromogenic reagent di-2-pyridyl ketone benzoylhydrazone (dPKBH) in an alkaline medium. The complex stoichiometry was 1:2 (Cu:dPKBH) and presents maximum absorbance at 370 nm. The influence of chemical variables affecting the behaviour of the system such as pH, concentration of dPKBH, buffer solution and ethanol, order of addition of the reagents and stability of the complex, were evaluated. The molar absorptivity (epsilon) was 3.92x10(4) L mol(-1) cm(-1), and Beer's law was obeyed up to 3 mg L(-1) of copper. The relative standard deviation was 0.46% (n=11) for a sample containing 1 mg L(-1) Cu(II). The limit of detection was 2.5 micro g L(-1) and was therefore more sensitive than the direct methods reported previously. Finally, the method was successfully validated by analysing several real samples with different matrices, such as tap water, natural water or copper alloys, with an average relative error of 2.46%.     

The Reaction of Singlet Oxygen with Adamantylideneadamantane Mediated by Rose Bengal

The photo-oxygenation of adamantylideneadamantane ( 1 ) on siliceous supports using admixed granules of ion-exchange resin fixed to methylene blue (MB) and rose bengal (RB) gave exclusively the corresponding dioxetane derivative 2 for the former sensitizer, while the latter gave 2 and traces of the epoxide 3. RB and the charge-transfer complex produced from N-ethylcarbazole and 2,4,5,6-tetranitrofluoren-9-one both reacted with chemically generated singlet oxygen to give superoxide radical anion. Trapping of the latter with 5,5-dimethyl-1-pyrroline 1-oxide gave an adduct exhibiting a characteristic ESR spectrum. The treatment of 1 in MeOH with 30% aqueous H₂O₂ for 22 h at 60° gave 3 in 100% yield. Repetition of this experiment in the presence of 2,6-di(tert-butyl)-p-cresol caused no significant change. These results indicate that singlet oxygen reacts with 1 , in the presence of RB, by two different processes. The first leads to dioxetane formation. The second process involves conversion of singlet oxygen by RB to superoxide radical anion which subsequently gives H₂O₂ so producing epoxide 3 from 1 .     

A thieno-2H-chromene alpha-amino acid derivative: synthesis and photochromic properties

[structure: see text] A new photochromic thieno-2H-chromene alpha-amino acid derivative was prepared by C-N palladium-catalyzed cross-coupling of a bromothieno-2H-chromene with the aminated aromatic side chain of the methyl ester of a N,N-diprotected amino acid. Its good photochromic properties demonstrated by flash photolysis and continuous irradiation indicate a possible application in ophthalmic lenses. It may also be inserted into peptides to give photoinduced reversible structural changes.     

Syntheses of pyrimidine and purine analogs derived from 1,2,6-thiadiazine 1,1-dioxide

5-Amino-3-oxo-2H, 4H-1,2,6-thiadiazine 1,1-dioxide and the monopotassium salt of 3,5-dioxo-2H, 4H,6H-1,2,6-thiadiazine 1,1-dioxide was obtained by condensation of sulfamide and ethyl cyanacetate and diethyl malonate, respectively. 7-Oxo-1H,4H,6H-imidazo[2,3-c]-1,2,6-thia-diazine 5,5-dioxide was prepared by a multi-step reaction sequence from 5-amino-3-oxo-2H, 4H-1,2,6-thiadiazine 1,1-dioxide.     

Clean osmium-catalyzed asymmetric dihydroxylation of olefins in ionic liquids and supercritical CO2 product recovery

The combination of ionic liquids (ILs) as solvents in the asymmetric Sharpless dihydroxylation (AD) with the use of scCO(2) in the separation process allows a very simple, efficient, clean and robust system for the reuse of the AD catalytic system, which also does not need the use of organic solvents either for the reaction or for the separation of products and allows the isolation of the diol, in high yield and enantiomeric excess and basically without contamination with osmium.     

Synthesis of 5-glycopyranosylamino-pyrano[2,3-d]pyrimidin-2-one derivatives

Summary Three series of 3-substituted 5-glycopyranosylamino pyrano[2,3-d]pyrimidin-2-one derivatives,3 a–c,4 a–c, and5 a–c have been prepared by treatment of the corresponding 1,4-dihydro-6-glycopyranosylamino pyrimidin-4-ones1 a–c with malonic, methyl malonic and ethyl malonic acids, respectively.

---

Synthese von Derivaten des 5-Glucopyranosylaminopyrano[2,3-d]pyrimidin-2-on

Zusammenfassung Es wurden drei Serien von 3-substituierten 5-Glucopyranosylaminopyrano[2,3-d]pyrimidin-2-onen (3 a–c,4 a–c und5 a–c) mittels Behandlung der entsprechenden 1,4-Dihydro-6-glucopyranosylamino-pyrimidin-4-one (1 a–c) mit Malon-, Methylmalon- bzw. Ethylmalonsäure dargestellt.

     

New designs for inhibitors of the NF-κB: DNA binding

We present a series of new inhibitors of the association between nuclear factor kappa B (NF-B) and the corresponding B site in DNA. They were designed using the lead compound 15-deoxy-^12,14 -prostaglandin J₂ (PGJ2), which is a natural product with demonstrated inhibitory efficiency for this system. First, the binding mode of PGJ2 to NF-B was unraveled by GOLD docking calculation. Subsequently, substitutions were made to PGJ2 to optimize its association with NF-B. Care was taken not to strongly increase the reactivity of the new compounds, and to keep the overall shape, size and hydrophilicity of the lead compound, which should render them a similar bioavailability. Molecular mechanics calculations were performed to decide on the suitability of the substitutions, and to evaluate the energies of association with NF-B. Density functional theory calculations were performed also to study the overall reactivity of the substituted drugs towards NF-B. Important general conclusions were obtained, concerning the improvement of these natural inhibitors; namely, a set of rational methodologies were deduced to improve the association between the PGJ2 derivatives and NF-B, and their efficiency demonstrated by generating a set of substituted complexes, some of them with a very much increased affinity for NF-B, opening new doors to enlarge the therapeutic capabilities of this class of drugs.     

Dynamic contact angle and spreading rate measurements for the characterization of the effect of dentin surface treatments

A new methodology capable of providing reliable and reproducible contact angle (theta) data has been employed to study the effect of clinical treatments grinding, acid etching, and deproteinization on medial dentin tissue. It is based on the application of the ADSA-CD algorithm to the determination of low-rate dynamic contact angles, obtained from slowly growing drops, and on contact angle measurement, as well as spreading behavior analysis, during the relaxation of the system (water on treated dentin) after initial drop growth. The theta data obtained were substantially more reproducible than those obtained with classical methods. A net effect of the treatment on theta was found, increasing dentin wettability: theta (polished) >theta (etched) >theta (deproteinized). The spreading rates correlate with the angles and are adequate for the dentin surface characterization. ANOVA and SNK tests show that for advancing contact angles the means corresponding to all treatments are significantly different. In the relaxing phase, mean angle and spreading rates on polished dentin differ significantly from those on etched and deproteinized dentin, but the latter do not differ significantly from each other.     

The effect of the "inert" counteranions in the deprotonation of the dihydrogen complex trans-[FeH(eta 2-H2)(dppe)2]+: kinetic and theoretical studies

Kinetic studies indicate that trans-[FeH(H2)(dppe)2]+ reacts with an excess of NEt3 to form cis-[FeH2(dppe)2] in a single kinetic step. The second-order rate constant is strongly affected by the presence of added salts, an acceleration being observed with BF4- and PF6- salts and a deceleration with BPh4-. Theoretical calculations indicate that the role of the accelerating anions consists of the formation of ion pairs that provide a more effective reaction pathway for deprotonation. However, for the ion pair with the bulky BPh4- anion, steric crowding in the proximities of the dihydrogen ligand hinders the approach of the base, and the reaction is decelerated.