Investigating generation mechanisms of tyre/road noise by speed exponent analysis

The purpose of this study is to clarify the influence of air-pumping related noise sources on typical tyre/road noise. The aim is to increase the understanding of noise generation mechanisms and catalyse the development of existing tyre/road noise simulation tools. The speed dependency of measured and simulated tyre/road noise is analysed and the results show that a large part of the noise can be explained by a high speed exponent traditionally connected with air-pumping mechanisms. Surprisingly, this is also the case for rough road surfaces which are expected to mainly generate noise by tyre vibrations. It is also found that vehicle wind noise may have a strong influence on the pass-by noise and care must be taken when analysing measurement data of quiet tyre/road combinations. Even simulated tyre/road noise shows higher speed exponents than what is anticipated without the inclusion of any type of air-pumping mechanism in the model. It is concluded that it is unfeasible to separate noise created by tyre vibrations from noise created by air-pumping with a speed exponent analysis due to the overlap in the speed exponents connected with the different generation mechanisms.     

Rovibrational dynamics of the RbCs molecule in static electric fields. Classical study

We study the classical dynamics of the RbCs molecule in the presence of a static electric field. Under the Born–Oppenheimer approximation, we perform a rovibrational investigation which includes the interaction of the field with the molecular polarizability. The stability of the equilibrium points and the phase space structure of the system are explored in detail. We find that, for strong electric fields or for energies close to the dissociation threshold, the molecular polarizability causes relevant effects on the system dynamics.     

The need to measure low-energy antineutrinos (<Emphasis Type="Italic">E</Emphasis><Subscript><Emphasis Type="Italic">⊻</Emphasis></Subscript><0.782 MeV) from the Sun

Measurements are needed of low-energy antineutrinos generated by possible neutron decay at the core of the Sun. The measurement will test the validity of a proposal that solar luminosity, solar neutrinos, and the outpouring of H⁺ ions from the solar surface are the products of a chain of reactions triggered by neutron emission from the solar core. Inverse β decay of 87-d ³⁵S, induced by capture of low-energy antineutrinos on ³⁵Cl, is a likely candidate for this measurement.     

Silicon nanowire and polyethylene superhydrophobic surfaces for discrete magnetic microfluidics

A microfluidic method to manipulate small drops of water is studied on two different superhydrophobic surfaces. Using this digital magnetofluidic method, water drops containing paramagnetic carbonyl-iron microparticles were displaced on silicon nanowire (Si NW) and low-density polyethylene (LDPE) superhydrophobic surfaces using magnetic fields. Horizontal, vertical, or upside-down drop movement is made possible by the action of capillary forces induced by paramagnetic particles aligning and following a magnetic field, indicating that three-dimensional digital microfluidics is possible. Also, both Si NW and LDPE superhydrophobic surfaces combine surface chemistry with nano and microscale surface roughness to make drop movement possible. Si NW superhydrophobic surfaces were prepared using vapor-liquid-solid growth systems followed by coating with a perfluorinated hydrocarbon. LDPE superhydrophobic surfaces were prepared by growing polyethylene crystals on a polyethylene substrate through careful rate control.     

Nanoparticle electrostatic loss within corona needle charger during particle-charging process

A numerical investigation has been carried out to examine the electrostatic loss of nanoparticles in a corona needle charger. Two-dimensional flow field, electric field, particle charge, and particle trajectory were simulated to obtain the electrostatic deposition loss at different conditions. Simulation of particle trajectories shows that the number of charges per particle during the charging process depends on the particle diameter, radial position from the symmetry axis, applied voltage, Reynolds number, and axial distance along the charger. The numerical results of nanoparticle electrostatic loss agreed fairly well with available experimental data. The results reveal that the electrostatic loss of nanoparticles increases with increasing applied voltage and electrical mobility of particles; and with decreasing particle diameter and Reynolds number. A regression equation closely fitted the obtained numerical results for different conditions. The equation is useful for directly calculating the electrostatic loss of nanoparticles in the corona needle charger during particle-charging process.     

Modelling of optical absorption of silver NP’s produced by UV radiation embedded in mesostructured silica films

Hexagonal mesostructured films containing silver ions were obtained by sol–gel method. Brij 58 was used to produce channels into the film, which house these ions. The films were exposure to UV radiation to produced silver metallic nanoparticles. The presence of the metallic nanoparticles was determined by infrared spectroscopy and optical absorption. Besides, these nanoparticles and core–shell structures of silver–silver oxide nanoparticles were identified by high-resolution transmission electronic microscopy. From these measurements, the obtained size range for silver nanoparticles was 6.1 nm. The absorption spectrum located at 440 nm was modelled and well fitted with the Gans theory considering refractive index higher than the one coming from host matrix. This index is explained because the silver oxide shell modifies the local surrounding medium of the metallic nanoparticles.     

Accurate control of a liquid-crystal display to produce a homogenized Fourier transform for holographic memories

We show an accurate procedure to obtain a Fourier transform (FT) with no dc term using a commercial twisted-nematic liquid-crystal display. We focus on the application to holographic storage of binary data pages, where a drastic decrease of the dc term in the FT is highly desirable. Two different codification schemes are considered: binary pi radians phase modulation and hybrid ternary modulation. Any deviation in the values of the amplitude and phase shift generates the appearance of a strong dc term. Experimental results confirm that the calculated configurations provide a FT with no dc term, thus showing the effectiveness of the proposal.