Determination of propazine by differential pulse polarography in micellar and emulsified media

An electroanalytical study of the herbicide propazine's reduction process in micellar solutions and oil-in-water emulsions is reported. The anionic surfactant sodium pentanesulphonate was chosen as the most suitable. The differential pulse polarograms of micellar solutions had two reduction peaks below pH 2.0, whereas only one peak was obtained above pH 2.O. Ethyl acetate was chosen as the organic solvent to form propazine emulsions. Unlike in micellar solutions, the DPP polarograms of propazine emulsions showed only one peak even at pH < 2.0, suggesting that propazine hydrolysis was hindered in the emulsified medium. The limiting current is diffusion-controlled and the electrode process is irreversible. Propazine can be determined by differential pulse polarography over the 1.0 × 10^–1 – 1.0 × 10^–1moll^–1 and 1.0 × 10^–15 – 4.0 × 10^–1 moll^–1 concentration ranges and the limit of detection was 2.8 × 10^–1 moll^–1. Of the potential interferents simazine, methoprotryne and terbutryn (alls-triazines), thiram (a dithiocarbamate), dinoseb (nitrophenolic), and heptachlor (chlorinated cyclo-diene herbicide), only the first two were significant (10% error for equimolar concentrations). The method was applied to the determination of propazine in spiked drinking water. At a concentration level of 2.0 × 10^–1 moll^–1 a recovery of 94 ± 6% was obtained, after tenfold concentration on Sep-Pak.     

Kinematical and gravitational analysis of the rocket-borne clock experiment by Vessot and Levine using the revised Robertson's test theory of special relativity

The kinematic aspects of the rocket-borne clock experiment by Vessot and Levine are analyzed with the revised Robertson's test theory of special relativity (Found. Phys. 14, 625 (1984)). Besides the expected time-dilation, it is found that the intermediate steps of this experiment yield in principle Michelson-Morley type information (a relation between longitudinal and transverse length contractions) in the third order of the velocities involved, but no relativity-of-simultaneity related effects.The flat space-time test theory induces a family of spherically symmetric line elements that become the Schwarzschild line element in the relativistic case and also in theabinito rest frame of the theory. These line elements represent the same space-time manifold, but pertain in a one-to-one correspondence to the different flat space-time coordinate transformations of the test theory. The conserved energy is related to the family of local energies in the tangent plane. No deviations from the orthodoxy appear at the pertinent levels of approximation. Hence the unexplained residuals of the Vessot-Levine experiment are not due in obvious ways to kinematic and gravitational frequency shifts caused by deviations of the real coordinate transformations from the Lorentz transformations.This work was started while the author was at Departamento de Fisica, Facultad Experimental de Ciencias, Universidad del Zulia, Maracaibo, Venezuela. It was completed at the Department of Physics, Utah State University, Logan, Utah 83422.     

Revised Robertson's test theory of special relativity: Space-time structure and dynamics

The experimental testing of the Lorentz transformations is based on a family of sets of coordinate transformations that do not comply in general with the principle of equivalence of the inertial frames. The Lorentz and Galilean sets of transformations are the only member sets of the family that satisfy this principle. In the neighborhood of regular points of space-time, all members in the family are assumed to comply with local homogeneity of space-time and isotropy of space in at least one free-falling elevator, to be denoted as Robertson'sab initio rest frame [H. P. Robertson,Rev. Mod. Phys. 21, 378 (1949)].Without any further assumptions, it is shown that Robertson's rest frame becomes a preferred frame for all member sets of the Robertson family except for, again, Galilean and Einstein's relativities. If one now assumes the validity of Maxwell-Lorentz electrodynamics in the preferred frame, a different electrodynamics spontaneously emerges for each set of transformations. The flat space-time of relativity retains its relevance, which permits an obvious generalization, in a Robertson context, of Dirac's theory of the electron and Einstein's gravitation. The family of theories thus obtained constitutes a covering theory of relativistic physics.A technique is developed to move back and forth between Einstein's relativity and the different members of the family of theories. It permits great simplifications in the analysis of relativistic experiments with relevant Robertson's subfamilies. It is shown how to adapt the Clifford algebra version of standard physics for use with the covering theory and, in particular, with the covering Dirac theory.Part of this work was done at the Department of Physics, Utah State University, Logan, Utah 84322.     

The spherical-model limit in a random field

The spherical-model limitn of then-vector model in a random field, with either a statistically independent distribution or with long-range correlated random fields, is studied to demonstrate the correctness of the replica method in which then and replica limits limits are interchanged, provided the replica and thermodynamic limits are taken in the right order, in the case of long-range correlated random fields. A scaling form for the two-point correlation function relevant to the first-order phase transition below the lower critical dimensionality of the random system is also obtained.     

Solution conformation of a nitrobenzoxadiazole derivative of the polyene antibiotic nystatin: a FRET study

Nystatin is a polyene antibiotic frequently applied in the treatment of topical fungal infections. In this work, a 7-nitrobenz-2-oxa-1,3-diazole (NBD) hexanoyl amide derivative of nystatin was synthesized and its detailed photophysical characterization is presented. The average conformation of the labelled antibiotic in tetrahydrofuran, ethanol and methanol was determined by intramolecular (tetraene to NBD) fluorescence resonance energy transfer measurements. At variance with the literature [Can. J. Chem. 63 (1985) 77-85], it was concluded that there is no need to invoke a solvent-dependent conformational equilibrium between extended and closed conformers of the antibiotic, because the mean tetraene-to-NBD separating distance was found to remain constant (approximately 18 A) in all the solvents studied. In addition, the large solvent dependence of the fluorescence anisotropy observed for the non-derivatized nystatin, was rationalized on the basis of the prolate ellipsoidal geometry of the molecule. It was concluded that the rod shaped and amphipathic antibiotic remains monomeric in different solvents within the concentration range studied (2-20 microM).     

Molecular shape effects and quantum theory

Certain features of the chemist's molecular structure model, viz. size and shape, are retrieved even in the best non-adiabatic variational calculations thus far carried out for ground states of H ₂ ⁺ and H₂. Those features do not conflict with the full symmetry of exact molecular eigenstates, once they are properly understood as correlation effects.     

Development of a capillary electrophoretic method for the separation of diastereoisomers of a new human immunodeficiency virus protease inhibitor

A capillary electrophoretic (CE) method was developed for the separation of diastereoisomers of a new human immunodeficiency virus (HIV) protease inhibitor TMC114. In total 16 isomers of this drug have been synthesized (eight pairs of enantiomers). We succeeded in the separation of the eight diastereoisomers, but no enantiomers could be separated. Because of the high similarity and water-insolubility of these isomers, the separation is a real challenge. Different CE modes were tried out: capillary zone electrophoresis (CZE), nonaqueous capillary electrophoresis (NACE), micellar electrokinetic capillary chromatography (MEKC), and microemulsion electrokinetic capillary chromatography (MEEKC). Only MEEKC offered resolution of these compounds.     

Potentiometric studies on the complexation of copper(II) by phenolic acids as discrete ligand models of humic substances

Studies on the complexation of copper(II) by phenolic acids, as ligand models of humic substances were done by potentiometry. The acids under study were: 3,4-dihydroxyhydrocinnamic acid or hydrocaffeic acid (1), 3,4-dihydroxyphenylacetic acid (2) and 3,4-dihydroxybenzoic acid or protocatechuic acid (3). Acidity constants of the ligands and the formation constants of metal-ligand complexes were evaluated by computer programs. The carboxylic group of the phenolic acids has different pK_a1 values, being the dissociation constants intrinsically related with the distance between the function and the aromatic nucleus. The results obtained allow concluding that acidity constants of the catechol moiety of the compounds are similar with pK_a2 and pK_a3 values between 9.47-9.41 and 11.55-11.70. The complexation properties of the three ligands towards copper(II) ion are quite similar, being the species found not different either in nature or stability. Although the model ligands have some structural differences no significant differences were found in their complexation properties towards copper(II). So, it can be postulated that complexation process is intrinsically related with the presence of a catechol group.     

Fixed-bed adsorption of carbon dioxide/methane mixtures on silicalite pellets

The adsorption of carbon dioxide and methane on silicalite pellets packed on a fixed bed has been studied. Equilibrium and kinetic measurements of the adsorption of carbon dioxide and methane have been performed, and a binary adsorption isotherm for carbon dioxide/methane mixtures has been obtained. A model based on the LDF approximation for the mass transfer has been used to describe the breakthrough curves obtained experimentally. A PSA cycle has been proposed for obtaining methane with purity higher than 98% from carbon dioxide/methane mixtures containing 38% and 50% methane, and its performance has been simulated using the proposed model. The simulation results show that silicalite can be a suitable adsorbent for employment in a PSA separation process for carbon dioxide removal from coalseam and landfill gases.     

Lipase from a Brazilian StrainPenicillium citrinum Cultured in a Simple and Inexpensive Medium st]Heat-Denaturation, Kinetics, and pH Stability

This work is a study of lipase production by a Brazilian strain ofPenicillium citrinum using an inexpensive and simple medium without organic nitrogen sources and of some important industrial properties, including thermostability in relation to ionic strength. The maximal lipase activity (1585 U/L) was obtained whenPenicillium citrinum was cultured on 0.75% ammonium sulfate complemented with minerals salts instead of yeast extract. Although this activity was about 55% lower than that produced in medium with yeast extract (2850 U/L), the specific activity (7.8 U/mg proteins) was higher than that obtained with the yeast extract (4.9 U/mg proteins). The morphology of fungus changed totally, with yeast extract there are smooth, solid, and spherical pellets whereas on ammonium sulfate there are small “hairy” pellets uniformly suspended in the medium. The effect of ferrous (Fe⁺⁺) ions was carried out using medium MA with and without Fe⁺⁺ ions. Lipase production byPenicillium citrinum in medium MA requires Fe⁺⁺ ions, the absence of which caused a decreased of about 50% in the specific activity (3.5 U/mg proteins). The utilization of commercial, locally available oils as carbon sources, such as soybean oil (236 U/L) and corn oil (74 U/L) resulted in lower activity compared to olive oil, showing that lipase production byPenicillium citrinum is specifically induced by olive oil. Potassium concentration in the medium can effects the production of lipase (1 mM (1585 U/L), 10 mM (1290 U/L), and 30 mM (1238 U/L), 50 mM (195 U/L), and 100 mM (2 U/L). The crude culture filtered was susceptable to thermal deactivation. It was stable at pH 6.0, but was not stable at the optimum pH (8.0-8.5) at 50 mM. At the low ionic concentration (1-25 mM) this lipase was stable at low pH (3.5-4.0). The activation energy was 22.4 ±2.2 Kcal. mol 1.