Monitoring some phenoxyl-type N-methylcarbamate pesticide residues in fruit juices using high-performance liquid chromatography with peroxyoxalate-chemiluminescence detection

A systematic investigation of optimal conditions for determining three of the most common phenoxyl-type N-methylcarbamate pesticides (carbaryl, carbofuran and propoxur) in fruit juices by HPLC with peroxyoxalate-chemiluminescence detection is described. The required pre-column hydrolysis of pesticides and derivatization of their hydrolytic metabolites with dansyl chloride was simultaneously carried out in a short time thanks to the micellar catalytic effect provided by cetyltrimethyl ammonium bromide micelles on the hydrolysis step. The liquid chromatographic separation of the dansylated phenols was performed on a reversed-phase C18 column with isocratic elution. The analytes were detected by using an integrated derivatization chemiluminescence detection unit based on the bis(2,4,6-trichlorophenyl)oxalate-hydrogen peroxide system. Fruit juice samples containing 4.0-1500 microg/l pesticides were analysed with a precision of ca. 6.5%. After contamination of the fruit juice samples, average recovery > 93% at fortification levels of 10-100 microg/l was obtained.     

Ag(I) complexes with alkylidene-bis(2-aminopyrimidines) as building units for discrete metallomacrocyclic frames. A structural and solution study

Alkylidene-bis(2-aminopyrimidines) (pyr2Cx, x = 2-5) are useful ligands to interact with Ag(I) yielding discrete metallocycles. Crystal structures of the [(pyr2C2)Ag(NO3)]2 and [(H-pyr2C4)Ag(NO3)2]2 have been isolated where each macrocyclic moiety interacts with their surroundings through weak interactions, yielding 3D discrete structures, On the other hand, the solution study shows that the equilibrium constants for the formation of Ag(pyr2Cx)+ complexes are higher than the literature values for Ag(I) complexes with single pyrimidines, although the differences could be explained by invoking the solid-state structures of the Ag(I)-pyr2Cx complexes.     

Determination of mercury in soils and sediments by graphite furnace atomic absorption spectrometry with slurry sampling

A graphite furnace atomic absorption spectrometric procedure for the determination of mercury is presented, in which the samples are suspended in a solution containing hydrofluoric and nitric acids. Silver nitrate (4% m/v) and potassium permanganate (3%) are incorporated, in the order specified, and aliquots are directly introduced into the graphite furnace. A fast heating programme with no conventional pyrolysis step is used. The detection limit for mercury in a 125 mg ml⁻¹ suspension is 0.1 μg g⁻¹. Calibration is performed by using aqueous standards. The reliability of the procedure is proved by analysing certified reference materials.     

Singlet exciplexes between a thioxanthone derivative and substituted aromatic quenchers: role of the resonance integral

Fluorescence quenching of a thioxanthone derivative by methyl- and methoxy-substituted benzenes (MeB and MeOB, respectively) is performed in solvents of different polarity. Emissive exciplexes are observed even in polar solvents and provide kinetic and spectroscopic data over a large scale of solvent polarity. These data were subsequently analyzed by use of a new theoretical model that leads to a thermodynamic relationship between exciplex and electron-transfer driving forces Delta G(exc) and Delta G(et), respectively. The remarkable agreement found between this model and both kinetic and spectroscopic data supports its validity. Moreover, the difference observed between MeB and MeOB compounds in quenching efficiency is analyzed by this model and provides the main parameters governing exciplex features, especially the resonance integral between locally excited and charge-transfer states.     

BV periodic solutions of an evolution problem associated with continuous moving convex sets

This paper is concerned with BV periodic solutions for multivalued perturbations of an evolution equation governed by the sweeping process (or Moreau's process). The perturbed equation has the form –DuN _C (t)(u(t))+F(t,u(t)), whereC is a closed convex valued continuousT-periodic multifunction from [0,T] to ^d ,N ^C (t)(u(t)) is the normal cone ofC(t) atu(t),F: [0,T]× ^{d d} is a compact convex valued multifunction and Du is the differential measure of the periodic BV solutionu. Several existence results for this differential inclusion are stated under various assumptions on the perturbationF.     

Spectroscopic properties of the photoproducts of pyridoxal-5′-P irradiation: Catalytic site recognition of ribonuclease A

Photoproducts of pyridoxal-5-P, i.e., 4-pyridoxic-5-P and bis-pyridoxal-5-P, have been studied by spectroscopic methods. The spectroscopic properties of bis-pyridoxal-5-P (bis-PLP) resemble those of pyridoxal-5-P (PLP) under similar experimental conditions. The coupling of methylen hydrogens to the phosphorus atom has been shown by NMR spectroscopy. The singlet in the³¹P-NMR spectra and the triplet in¹H-undecoupled experiments confirm the presence of the phosphate group in the 5 position of the structure of the vitamin. The effect of pH and solvent composition on the relative distribution of species of bis-pyridoxine-5-P (bis-PNP) has been investigated by absorption and fluorescence spectroscopy. The acid-base dissociation of the phosphate group is easily detected by emission spectroscopy. Bis-PNP and bis-PLP bind to the enzyme RNase A and they behave as competitive inhibitors with respect to the substrate cytidine-2-3-cyclic phosphate. The natural forms of vitamin B₆, pyridoxine, and pyridoxine-5-P have no effect on the catalytic activity of the protein. Experimental evidence derived from fluorescence and inhibition experiments is consistent with the hypothesis that bis-PNP recognizes the catalytic site of RNase A.     

Synthesis, crystal structure, and properties of MnNCN, the first carbodiimide of a magnetic transition metal

Synthesis, single-crystal structure determination, and magnetic properties are reported for manganese carbodiimide, MnNCN. The presumably unstable but inert phase adopts the trigonal system (R3m) with a = 3.3583(4) A, c = 14.347(2) A, V = 140.13(3) A3, and Z = 3. Divalent manganese is octahedrally coordinated by nitrogen atoms at 2.26 A, and the NCN(2-) unit adopts the linear [N=C=N](2-) carbodiimide shape with two C=N double bonds of 1.23 A. MnNCN contains high-spin Mn(II) with five unpaired electrons and behaves like an antiferromagnet with an ordering temperature below 30 K.     

Flow-through optical fiber sensor for automatic sulfide determination in waters by multisyringe flow injection analysis using solid-phase reflectometry

A software-controlled flow-through optical fiber diffuse reflectance sensor capitalized on the implementation of disk-based solid-phase pre-concentration schemes in a multisyringe flow injection analysis (MSFIA) set-up is proposed for the trace determination of sulfide in environmental waters and wastewaters. The fully automated flowing methodology is based on Fischer's coupling reaction of sulfide with N,N-dimethyl-p-phenylenediamine (DMPD) in the presence of Fe(iii) as oxidizing reagent in a 0.5 M HCl medium. The on-line generated methylene blue dye is subsequently delivered downstream to a dedicated optode cell furnished with an octadecyl-chemically modified (C(18)) disk, while continuously recording the diffuse reflectance spectrum of the pre-concentrated compound. A double regeneration protocol is finally executed to warrant minimum background noise and negligible baseline. Under the optimized chemical and hydrodynamic conditions, the optosensing MSFIA method features coefficients of variation better than 0.7%(n= 10) at 50 microg l(-1) concentration, a linear working range of 20-200 microg l(-1) sulfide, a 3sigma(blank) detection limit of 2.9 microg l(-1) sulfide and an injection throughput of 8 h(-1) for a pre-concentration sample volume of 2.9 ml. The interfacing of the robust and versatile multisyringe flow injection-based optode with a plug-in spectrophotometer furnished with a light emitting diode assures the miniaturization of the overall flow analyzer, which is, thus, readily adaptable to real-time monitoring schemes. The potential of the multisyringe flow method was assessed via the determination of sulfide traces in water samples of different complexity (namely, freshwater, seawater and wastewater).     

A simple and very sensitive spectrophotometric method for the direct determination of copper ions

A sensitive spectrophotometric method for the direct determination of copper in aqueous samples without a preconcentration step has been developed. It is based on the formation of a yellow complex with the chromogenic reagent di-2-pyridyl ketone benzoylhydrazone (dPKBH) in an alkaline medium. The complex stoichiometry was 1:2 (Cu:dPKBH) and presents maximum absorbance at 370 nm. The influence of chemical variables affecting the behaviour of the system such as pH, concentration of dPKBH, buffer solution and ethanol, order of addition of the reagents and stability of the complex, were evaluated. The molar absorptivity (epsilon) was 3.92x10(4) L mol(-1) cm(-1), and Beer's law was obeyed up to 3 mg L(-1) of copper. The relative standard deviation was 0.46% (n=11) for a sample containing 1 mg L(-1) Cu(II). The limit of detection was 2.5 micro g L(-1) and was therefore more sensitive than the direct methods reported previously. Finally, the method was successfully validated by analysing several real samples with different matrices, such as tap water, natural water or copper alloys, with an average relative error of 2.46%.