Trehalose-based cyclodextrin analogs: cyclotrehalans (CTs)

A new concept for the de novo synthesis of artificial glyconanocavities is presented. The use of alternating α,α′-trehalose building blocks and (thio)urea segments allows the efficient synthesis of a new family of cyclooligosaccharides, namely cyclotrehalans (CTs), featuring a convex-shaped cavity with an apolar environment. CTs are designed to exhibit molecular inclusion abilities similar to that of cyclodextrins (CDs). Contrary to CDs, CTs expose the monosaccharide β-face to the inner cavity, while the (thio)urea tethers provides some conformational adaptability. High-yielding syntheses of a series of CTs and a preliminary evaluation of their inclusion properties are reported.     

Inter- and intramolecular potential for the N-formylglycinamide-water system. A comparison between theoretical modeling and empirical force fields

An intramolecular NEMO potential is presented for the N-formylglycinamide molecule together with an intermolecular potential for the N-formylglycinamide-water system. The intramolecular N-formylglycinamide potential can be used as a building block for the backbone of polypeptides and proteins. Two intramolecular minima have been obtained. One, denoted as C5, is stabilized by a hydrogen bonded five member ring, and the other, denoted as C7, corresponds to a seven membered ring. The interaction between one water molecule and the N-formylglycinamide system is also studied and compared with Hartree-Fock SCF calculations and with the results obtained for some of the more commonly used force fields. The agreement between the NEMO and SCF energies for the complexes is in general superior to that of the other force fields. In the C7 region the surfaces obtained from the intramolecular part of the commonly used force fields are too flat compared to the NEMO potential and the ab initio calculations. We further analyze the possibility of using a charge distribution obtained from one conformation to describe the charge distribution of other conformations. We have found that the use of polarizabilities and generic dipoles can model most of the changes in charge density due to the different geometry of the new conformations, but that one can expect additional errors in the interaction energies that are of the order of 1 kcal/mol.     

Validation of an analytical method to determine trace metal impurities in fluoride compounds by flame atomic absorption spectroscopy

 The development of an analytical method for the determination of some heavy metals (Fe, Cu, Co, Zn and Ni) in fluoride compounds [Cu(BF₄)₂, Sn(BF₄)₂, Pb(BF₄)₂ and HBF₄] by flame atomic absorption spectroscopy is described. This method is to be used as a routine analytical method in an industrial quality control laboratory. To this end the "performance characteristics" of an instrumental analytical method such as matrix effects, sensitivity, linearity, detection and quantitation limits, precision and accuracy were evaluated for every system under study. The results of these investigations showed that non-spectral interferences (due to the presence of large concentrations of major metals such as Cu, Sn and Pb) were observed. Nevertheless it was possible to define a matrix concentration interval where matrix effects were not statistically significant, and therefore a direct calibration approach could be used as the calibration tool whenever the major metal concentration was not higher than 40×10^–3 kg l^–1. A guide to the developement of an analytical method for trace metal determination is provided. General tools for quality control have been used in order to show how an analytical method can be tested daily and evaluated in a convenient manner. Received: 29 January 1997 Accepted: 11 March 1997     

The electrophilic reactions of pentacyanonitrosylferrate(II) with hydrazine and substituted derivatives. Catalytic reduction of nitrite and theoretical prediction of eta(1)-, eta(2)-N(2)O bound intermediates

The electrophilic reactivity of the pentacyanonitrosylferrate(II) ion, [Fe(CN)(5)NO](2)(-), toward hydrazine (Hz) and substituted hydrazines (MeHz, 1,1-Me(2)Hz, and 1,2-Me(2)Hz) has been studied by means of stoichiometric and kinetic experiments (pH 6-10). The reaction of Hz led to N(2)O and NH(3), with similar paths for MeHz and 1,1-Me(2)Hz, which form the corresponding amines. A parallel path has been found for MeHz, leading to N(2)O, N(2), and MeOH. The reaction of 1,2-Me(2)Hz follows a different route, characterized by azomethane formation (MeNNMe), full reduction of nitrosyl to NH(3), and intermediate detection of [Fe(CN)(5)NO](3)(-). In the above reactions, [Fe(CN)(5)H(2)O](3)(-) was always a product, allowing the system to proceed catalytically for nitrite reduction, an issue relevant in relation to the behavior of the nitrite and nitric oxide reductase enzymes. The mechanism comprises initial reversible adduct formation through the binding of the nucleophile to the N-atom of nitrosyl. The adducts decompose through OH(-) attack giving the final products, without intermediate detection. Rate constants for the adduct-formation steps (k = 0.43 M(-)(1) s(-)(1), 25 degrees C for Hz) decrease with methylation by about an order of magnitude. Among the different systems studied, one-, two-, and multielectron reductions of bound NO(+) are analyzed comparatively, with consideration of the role of NO, HNO (nitroxyl), and hydroxylamine as bound intermediates. A DFT study (B3LYP) of the reaction profile allows one to characterize intermediates in the potential hypersurface. These are the initial adducts, as well as their decomposition products, the eta(1)- and eta(2)-linkage isomers of N(2)O.     

Gas-phase structure of protonated histidine and histidine methyl ester: combined experimental mass spectrometry and theoretical ab initio study

Gas-phase H/D exchange experiments with CD3OD and D2O and quantum chemical ab initio G3(MP2) calculations were carried out on protonated histidine and protonated histidine methyl ester in order to elucidate their bonding and structure. The H/D exchange experiments show that both ions have three equivalent fast hydrogens and one appreciably slower exchangeable hydrogen assigned to the protonated amino group participating in a strong intramolecular hydrogen bond (IHB) with the nearest N(sp2) nitrogen of the imidazole fragment and to the distal ring NH-group, respectively. It is taken for granted that the proton exchange in the IHB is much faster than the H/D exchange. Unlike in other protonated amino acids (glycine, proline, phenylalanine, tyrosine, and tryptophan) studied earlier, the exchange rate of the carboxyl group in protonated histidine is slower than that of the amino group. The most stable conformers and the enthalpies of neutral and protonated histidine and its methyl ester are calculated at the G3(MP2) level of theory. It is shown that strong intramolecular hydrogen bonding between the amino group and the imidazole ring nitrogen sites is responsible for the stability and specific properties of the protonated histidine. It is found that the proton fluctuates between the amino and imidazole groups in the protonated form across an almost vanishing barrier. Proton affinity (PA) of histidine calculated by the G3(MP2) method is 233.2 and 232.4 kcal mol(-1) for protonation at the imidazole ring and at the amino group nitrogens, respectively, which is about 3-5 kcal mol(-1) lower than the reported experimental value.     

Identifying acetylated lignin units in non-wood fibers using pyrolysis-gas chromatography/mass spectrometry

A series of non-wood plant fibers, namely kenaf, jute, sisal and abaca, have been analyzed upon pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) of the whole material. The pyrolysis products mainly arise from the carbohydrate and lignin moieties of the fibers. The lignin-derived phenols belonged to the p-hydroxyphenylpropanoid (H), guaiacylpropanoid (G) and syringylpropanoid (S) structures, and showed a high S/G ratio of between 2.0 and 5.4, the highest corresponding to kenaf. Among the lignin-derived phenols released, small amounts of sinapyl and coniferyl acetates (in both cis- and trans-forms) were identified for the first time upon Py-GC/MS of lignocellulosic materials. Acetylation of the sinapyl and coniferyl alcohols was at the gamma-position of the side chain. The release of these alcohols derived from intact acetylated lignin units upon pyrolysis seems to indicate that the native lignin in the fibers selected for this study is at least partially acetylated. Sinapyl (and coniferyl) acetates have recently been suggested to be authentic lignin precursors involved in the polymerization of lignin along with the normal sinapyl and coniferyl alcohols. Py-GC/MS will offer a convenient and rapid tool for analyzing naturally acetylated lignins, as well as to screen plant materials for the presence of acetylated units in lignin.     

Elucidation of the pore structure of SBA-2 using Monte Carlo simulation to interpret experimental data for the adsorption of light hydrocarbons

We have measured the adsorption of methane and ethane to high pressure on SBA-2, a structured mesoporous silica composed of spheres connected by narrow channels. The experimental data were analyzed by carrying out Monte Carlo simulations of adsorption in pore structure models of different complexity and then adjusting the parameters of the models to match the Monte Carlo results to the experimental data. We found that a model based on single-sized spherical cavities was inadequate and that it is necessary to explicitly account for the interconnecting channels. Further, we found that despite the basic regularity of the SBA-2 structure, it is necessary to allow for a distribution of the sizes of both the cavities and the channels. These size distributions were obtained by fitting the parameters of the model to the experimental adsorption data, revealing detailed structural information not previously known for this material. The channels were found to be 5-15 A in diameter, while the cavities were 40-50 A in diameter. There is some evidence that the distribution of channel sizes leads to a percolation effect whereby the pore structure is not equally accessible to all adsorptives.     

Simple and rapid micellar electrokinetic capillary chromatographic method for simultaneous determination of four antiepileptics in human serum

A very rapid and simple MEKC method was developed for the simultaneous determination of four antiepileptic drugs, ethosuximide (Etho), primidone (Pri), phenytoin (Pht) and carbamazepine (Cbz) in human serum. Sample analysis required only 100 microL of human serum which only needed to be centrifuged, decanted and combined with the running buffer [5.3 mM Na(2)HPO(4)/3.2 mM borax buffer (pH 9.5) containing 55 mM SDS and 3.5% (v/v) acetone]. The analysis was performed in only 10 min into fused-silica capillaries (57 cm total length with 50 microm i.d. and 50 cm to the detector) using the MEKC methodology with diode-array detection at 220 nm. The calibration graphs were established for ethoximide, primidone, phenytoin and carbamazepine between 0 and 20 mg/L. Recoveries were between 85 and 87%. The simplicity of the proposed methodology makes it suitable for routine clinical use, especially for epileptic patients on polytherapy.     

Monitoring some phenoxyl-type N-methylcarbamate pesticide residues in fruit juices using high-performance liquid chromatography with peroxyoxalate-chemiluminescence detection

A systematic investigation of optimal conditions for determining three of the most common phenoxyl-type N-methylcarbamate pesticides (carbaryl, carbofuran and propoxur) in fruit juices by HPLC with peroxyoxalate-chemiluminescence detection is described. The required pre-column hydrolysis of pesticides and derivatization of their hydrolytic metabolites with dansyl chloride was simultaneously carried out in a short time thanks to the micellar catalytic effect provided by cetyltrimethyl ammonium bromide micelles on the hydrolysis step. The liquid chromatographic separation of the dansylated phenols was performed on a reversed-phase C18 column with isocratic elution. The analytes were detected by using an integrated derivatization chemiluminescence detection unit based on the bis(2,4,6-trichlorophenyl)oxalate-hydrogen peroxide system. Fruit juice samples containing 4.0-1500 microg/l pesticides were analysed with a precision of ca. 6.5%. After contamination of the fruit juice samples, average recovery > 93% at fortification levels of 10-100 microg/l was obtained.     

A Comparative Study of Naproxen – Beta Cyclodextrin Complexes Prepared by Conventional Methods and Using Supercritical Carbon Dioxide

Naproxen is a poorly soluble anti-inflammatorydrug, the solubility of which canbe enhanced by complexation withbeta-cyclodextrin. Besides that, the inclusioncomplex reduces the incidence of gastrointestinal side effects of the drug. The aim of this work was to compare the physicochemical characteristics of the solid complexes prepared by traditional methods (kneading, freeze-drying and spray-drying) and using a supercritical fluid technology. The unusual solvent properties of carbon dioxide above their critical temperature and pressure were exploited in order to prepare inclusion compounds. Complexes prepared using supercritical fluid technology showed similar properties to those of freeze-drying andspray-drying complexes as proved by DSC, FT-IRand UV.