Reaction of 6-aminopyrimidin-4-ones with diethyl ethoxymethylenemalonate in several media: Synthesis of pyrido[2,3-d]pyrimidines

Reactions of 6-amino-3,4-dihydro-2-methoxy-4-oxopyrimidine 1 and its 3-methyl derivative 2 , with diethyl ethoxymethylenemalonate (EMME) are discussed in this paper. These reactions have been carried out in the following media: under fusion, ethanol, sodium methoxide/methanol, sodium ethoxide:ethanol and acetic acid media. In acetic medium, mixtures of products proceeding from C-alkylation and N-alkylation were obtained, while in the remaining conditions only products of N-alkylation were obtained.     

1,1',3,3',6,6',8,8'-Octachloro-9,9'-bifluorenylidene and perchloro-9,9'-bifluorenylidene,two exceedingly twisted ethylenes

The syntheses of 1,1',3,3',6,6',8,8'-octachloro-9,9'-bifluorenylidene (1), its precursors, and the byproduct 3,3',5,5'-tetrachloro-4-(trichloromethyl)biphenyl (5) are described. Accurate structural X-ray data on 1 and on perchloro-9,9'-bifluorenylidene (2) are reported and discussed. Because of chlorine overcrowding, the dihedral angles between their two identical fluorenylidene moieties are abnormally large, the central-ethylene twist angles being 55 and 66 degrees, respectively. Significant out-of-plane carbon-chlorine bond bending is likewise exhibited. Their ESR spectra and magnetic measurements prove that they are singlet species. The exceptionally large bathochromic displacements of their UV-vis absorption spectrum with respect to that of their parent hydrocarbon are mainly attributed to bond bending and molecular warping.     

Synthesis and Structure Elucidation of New Regioisomeric 2‐Alkylamino‐6‐aryl‐8,9‐dihydropyrimido[4,5‐b][1,4]diazepin‐4(7H)‐ones

Novel 2‐Alkylamino‐6‐aryl‐8,9‐dihydropyrimido[4,5‐b][1,4]diazepin‐4(7H)‐ones 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h , 5i , 5j , 5k , 5l , 5m , 5n , 5o were prepared regioselectively by the reaction of 2‐alkylamino‐5,6‐diaminopyrimidin‐4(3H)‐ones 3a , 3b , 3c and dimethylamino propiophenones (Mannich bases) 4a , 4b , 4c , 4d , 4e , 4f . The combination of conventional heating and microwave irradiation approaches provided the possibility of working with both stable and sensitive diaminopyrimidines by controlling parameters such as reaction rates, temperature, and power of irradiation. All products were fully characterized by detailed NMR measurements.     

The boron-catalyzed polymerization of dimethylsulfoxonium methylide. A living polymethylene synthesis

Trialkyl and aryl organoboranes catalyze the polymerization of dimethylsulfoxonium methylide (1). The product of the polymerization is a tris-polymethylene organoborane. Oxidation affords linear telechelic alpha-hydroxy polymethylene. The polymer molecular weight was found to be directly proportional to the stoichiometric ratio of ylide/borane, and polydispersities as low as 1.01-1.03 have been realized. Although oligomeric polymethylene has been the most frequent synthetic target of this method, polymeric star organoboranes with molecular weights of 1.5 million have been produced. The average turnover frequency at 120 degrees C in 1,2,4,5-tetrachlorobenzene/toluene is estimated at >6 x 10(6) g of polymethylene (mol boron)(-1) h(-1). The mechanism of the polyhomologation reaction involves initial formation of a zwitterionic organoborane.ylide complex which breaks down in a rate-limiting 1,2-alkyl group migration with concomitant expulsion of a molecule of DMSO. The reaction was found to be first order in the borane catalyst and zero order in ylide. DMSO does not interfere with the reaction. The temperature dependence of the reaction rate yielded the following activation energy parameters (toluene, DeltaH(++) = 23.2 kcal/mol, DeltaS(++) = 12.6 cal deg/mol, DeltaG(++) = 19.5 kcal/mol; THF, DeltaH(++) = 26.5 kcal/mol, DeltaS(++) = 21.5 cal deg/mol, DeltaG(++) = 20.1 kcal/mol).     

Use of capillary electrophoresis for characterisation of vinyl‐terminated Au nanoprisms and nanooctahedra

It is described a simple, rapid and efficient methodology to characterise and separate gold nanoprisms and nanooctahedra by capillary electrophoresis. This technique is suitable to distinguish between morphologies and it can be used as a powerful separation tool after a customised synthesis of both structures. This synthesis was carried out by amending two parameters, temperature and pH, and a sharp decrease was found in nanotriangles when temperature was increased from 70 up to 95°C. However, when the synthesis was performed at a given temperature, an increase in pH did not promote an important change in isolation of any structure until pH = 9.5, critical in the final morphology of the nanoparticle. Gold nanoprisms and nanooctahedra were successfully separated by capillary electrophoresis according to differences in charge‐to‐mass ratio of the morphologies. Final particle morphology was confirmed by transmission electron microscopy analysis. Under optimal working conditions, a mixture containing both shapes of gold nanoparticles was initially injected and two major peaks were obtained for each structure. Capillary electrophoresis allowed to study pH and temperature influence on both morphologies. It was inferred that the ratio between triangles and octahedra decreased to a great extent when increasing both temperature and pH.     

Synthesis of Copper-Based Nanostructures in Liquid Environments by Means of a Non-equilibrium Atmospheric Pressure Nanopulsed Plasma Jet

The influence of the liquid composition on the chemical and morphological properties of copper-based nanostructures synthesized by a non-equilibrium atmospheric plasma treatment is investigated and discussed. The synthesis approach is simple and environmentally friendly, employs a non-equilibrium nanopulsed atmospheric pressure plasma jet as a contactless cathode and a Cu foil as immersed anode. The process was studied using four distinct electrolyte solutions composed of distilled water and either NaCl?+?NaOH, NaCl only or NaOH only at two different concentrations, without the addition of any copper salts. CuO crystalline structures with limited impurities (e.g. Cu and Cu(OH)₂ phases) were produced from NaCl?+?NaOH containing solutions, mainly CuO and CuCl₂ structures were synthesized in the electrolyte solution containing only NaCl and no synthesis occurred in solutions containing only NaOH. Both aggregated and dispersed nanostructures were produced in the NaCl?+?NaOH and NaCl containing solutions. Reaction pathways leading to the formation of the nanostructures are proposed and discussed.     

Solid-State Treatment of Castor Cake Employing the Enzymatic Cocktail Produced from <Emphasis Type="Italic">Pleurotus djamor</Emphasis> Fungi

In this work, the enzymatic cocktail produced by Pleurotus djamor fungi extracted at pH of 4.8 and 5.3 was employed for castor cake solid-state treatment. Proximal, X-ray powder diffraction and scanning electron microscopy analysis of the pristine castor cake were carried out. First, Pleurotus djamor stain was inoculated in castor cake for the enzymatic production and the enzymatic activity was determined. The maximum enzymatic activity was identified at days 14 (65.9 UI/gss) and 11 (140.3 UI/gss) for the enzymatic cocktail obtained at pH 5.3 and 4.8, respectively. Then, the enzymatic cocktail obtained at the highest enzymatic activity days was employed directly over castor cake. Lignin was degraded throughout incubation time achieving a 47 and 45% decrease for the cocktail produced at pH 4.8 and 5.3, correspondingly. These results were corroborated by the SEM and XRD analysis where a higher porosity and xylan degradation were perceived throughout the enzymatic treatment.     

Selective Reductive Elimination at Alkyl Palladium(IV) by Dissociative Ligand Ionization: Catalytic C(sp3)−H Amination to Azetidines

A palladium(II)‐catalyzed γ‐C?H amination of cyclic alkyl amines to deliver highly substituted azetidines is reported. The use of a benziodoxole tosylate oxidant in combination with AgOAc was found to be crucial for controlling a selective reductive elimination pathway to the azetidines. The process is tolerant of a range of functional groups, including structural features derived from chiral α‐amino alcohols, and leads to the diastereoselective formation of enantiopure azetidines.