Singlet exciplexes between a thioxanthone derivative and substituted aromatic quenchers: role of the resonance integral

Fluorescence quenching of a thioxanthone derivative by methyl- and methoxy-substituted benzenes (MeB and MeOB, respectively) is performed in solvents of different polarity. Emissive exciplexes are observed even in polar solvents and provide kinetic and spectroscopic data over a large scale of solvent polarity. These data were subsequently analyzed by use of a new theoretical model that leads to a thermodynamic relationship between exciplex and electron-transfer driving forces Delta G(exc) and Delta G(et), respectively. The remarkable agreement found between this model and both kinetic and spectroscopic data supports its validity. Moreover, the difference observed between MeB and MeOB compounds in quenching efficiency is analyzed by this model and provides the main parameters governing exciplex features, especially the resonance integral between locally excited and charge-transfer states.     

Single-ion magnetism in the extended solid-state: insights from X-ray absorption and emission spectroscopy

Large single-ion magnetic anisotropy is observed in lithium nitride doped with iron. The iron sites are two-coordinate, putting iron doped lithium nitride amongst a growing number of two coordinate transition metal single-ion magnets (SIMs). Uniquely, the relaxation times to magnetisation reversal are over two orders of magnitude longer in iron doped lithium nitride than other 3d-metal SIMs, and comparable with high-performance lanthanide-based SIMs. To understand the origin of these enhanced magnetic properties a detailed characterisation of electronic structure is presented. Access to dopant electronic structure calls for atomic specific techniques, hence a combination of detailed single-crystal X-ray absorption and emission spectroscopies are applied. Together K-edge, L_2,3-edge and Kβ X-ray spectroscopies probe local geometry and electronic structure, identifying iron doped lithium nitride to be a prototype, solid-state SIM, clean of stoichiometric vacancies where Fe lattice sites are geometrically equivalent. Extended X-ray absorption fine structure and angular dependent single-crystal X-ray absorption near edge spectroscopy measurements determine Fe^I dopant ions to be linearly coordinated, occupying a D_6h symmetry pocket. The dopant engages in strong 3dπ-bonding, resulting in an exceptionally short Fe–N bond length (1.873(7) Å) and rigorous linearity. It is proposed that this structure protects dopant sites from Renner–Teller vibronic coupling and pseudo Jahn–Teller distortions, enhancing magnetic properties with respect to molecular-based linear complexes. The Fe ligand field is quantified by L_2,3-edge XAS from which the energy reduction of 3d_z² due to strong 4s mixing is deduced. Quantification of magnetic anisotropy barriers in low concentration dopant sites is inhibited by many established methods, including far-infrared and neutron scattering. We deduce variable temperature L₃-edge XAS can be applied to quantify the J = 7/2 magnetic anisotropy barrier, 34.80 meV (∼280 cm⁻¹), that corresponds with Orbach relaxation via the first excited, M_J = ±5/2 doublet. The results demonstrate that dopant sites within solid-state host lattices could offer a viable alternative to rare-earth bulk magnets and high-performance SIMs, where the host matrix can be tailored to impose high symmetry and control lattice induced relaxation effects.

Taking advantage of synchrotron light source methods, we present the geometric and electronic structure of iron doped in lithium nitride.     

Profit maximization in an inventory system with time-varying demand,partial backordering and discrete inventory cycle

In this paper, an inventory problem where the inventory cycle must be an integer multiple of a known basic period is considered. Furthermore, the demand rate in each basic period is a power time-dependent function. Shortages are allowed but, taking necessities or interests of the customers into account, only a fixed proportion of the demand during the stock-out period is satisfied with the arrival of the next replenishment. The costs related to the management of the inventory system are the ordering cost, the purchasing cost, the holding cost, the backordering cost and the lost sale cost. The problem is to determine the best inventory policy that maximizes the profit per unit time, which is the difference between the income obtained from the sales of the product and the sum of the previous costs. The modeling of the inventory problem leads to an integer nonlinear mathematical programming problem. To solve this problem, a new and efficient algorithm to calculate the optimal inventory cycle and the economic order quantity is proposed. Numerical examples are presented to illustrate how the algorithm works to determine the best inventory policies. A sensitivity analysis of the optimal policy with respect to some parameters of the inventory system is developed. Finally, conclusions and suggestions for future research lines are given.

     

BV periodic solutions of an evolution problem associated with continuous moving convex sets

This paper is concerned with BV periodic solutions for multivalued perturbations of an evolution equation governed by the sweeping process (or Moreau's process). The perturbed equation has the form –DuN _C (t)(u(t))+F(t,u(t)), whereC is a closed convex valued continuousT-periodic multifunction from [0,T] to ^d ,N ^C (t)(u(t)) is the normal cone ofC(t) atu(t),F: [0,T]× ^{d d} is a compact convex valued multifunction and Du is the differential measure of the periodic BV solutionu. Several existence results for this differential inclusion are stated under various assumptions on the perturbationF.     

Spectroscopic properties of the photoproducts of pyridoxal-5′-P irradiation: Catalytic site recognition of ribonuclease A

Photoproducts of pyridoxal-5-P, i.e., 4-pyridoxic-5-P and bis-pyridoxal-5-P, have been studied by spectroscopic methods. The spectroscopic properties of bis-pyridoxal-5-P (bis-PLP) resemble those of pyridoxal-5-P (PLP) under similar experimental conditions. The coupling of methylen hydrogens to the phosphorus atom has been shown by NMR spectroscopy. The singlet in the³¹P-NMR spectra and the triplet in¹H-undecoupled experiments confirm the presence of the phosphate group in the 5 position of the structure of the vitamin. The effect of pH and solvent composition on the relative distribution of species of bis-pyridoxine-5-P (bis-PNP) has been investigated by absorption and fluorescence spectroscopy. The acid-base dissociation of the phosphate group is easily detected by emission spectroscopy. Bis-PNP and bis-PLP bind to the enzyme RNase A and they behave as competitive inhibitors with respect to the substrate cytidine-2-3-cyclic phosphate. The natural forms of vitamin B₆, pyridoxine, and pyridoxine-5-P have no effect on the catalytic activity of the protein. Experimental evidence derived from fluorescence and inhibition experiments is consistent with the hypothesis that bis-PNP recognizes the catalytic site of RNase A.     

Synthesis, crystal structure, and properties of MnNCN, the first carbodiimide of a magnetic transition metal

Synthesis, single-crystal structure determination, and magnetic properties are reported for manganese carbodiimide, MnNCN. The presumably unstable but inert phase adopts the trigonal system (R3m) with a = 3.3583(4) A, c = 14.347(2) A, V = 140.13(3) A3, and Z = 3. Divalent manganese is octahedrally coordinated by nitrogen atoms at 2.26 A, and the NCN(2-) unit adopts the linear [N=C=N](2-) carbodiimide shape with two C=N double bonds of 1.23 A. MnNCN contains high-spin Mn(II) with five unpaired electrons and behaves like an antiferromagnet with an ordering temperature below 30 K.     

Flow-through optical fiber sensor for automatic sulfide determination in waters by multisyringe flow injection analysis using solid-phase reflectometry

A software-controlled flow-through optical fiber diffuse reflectance sensor capitalized on the implementation of disk-based solid-phase pre-concentration schemes in a multisyringe flow injection analysis (MSFIA) set-up is proposed for the trace determination of sulfide in environmental waters and wastewaters. The fully automated flowing methodology is based on Fischer's coupling reaction of sulfide with N,N-dimethyl-p-phenylenediamine (DMPD) in the presence of Fe(iii) as oxidizing reagent in a 0.5 M HCl medium. The on-line generated methylene blue dye is subsequently delivered downstream to a dedicated optode cell furnished with an octadecyl-chemically modified (C(18)) disk, while continuously recording the diffuse reflectance spectrum of the pre-concentrated compound. A double regeneration protocol is finally executed to warrant minimum background noise and negligible baseline. Under the optimized chemical and hydrodynamic conditions, the optosensing MSFIA method features coefficients of variation better than 0.7%(n= 10) at 50 microg l(-1) concentration, a linear working range of 20-200 microg l(-1) sulfide, a 3sigma(blank) detection limit of 2.9 microg l(-1) sulfide and an injection throughput of 8 h(-1) for a pre-concentration sample volume of 2.9 ml. The interfacing of the robust and versatile multisyringe flow injection-based optode with a plug-in spectrophotometer furnished with a light emitting diode assures the miniaturization of the overall flow analyzer, which is, thus, readily adaptable to real-time monitoring schemes. The potential of the multisyringe flow method was assessed via the determination of sulfide traces in water samples of different complexity (namely, freshwater, seawater and wastewater).     

A simple and very sensitive spectrophotometric method for the direct determination of copper ions

A sensitive spectrophotometric method for the direct determination of copper in aqueous samples without a preconcentration step has been developed. It is based on the formation of a yellow complex with the chromogenic reagent di-2-pyridyl ketone benzoylhydrazone (dPKBH) in an alkaline medium. The complex stoichiometry was 1:2 (Cu:dPKBH) and presents maximum absorbance at 370 nm. The influence of chemical variables affecting the behaviour of the system such as pH, concentration of dPKBH, buffer solution and ethanol, order of addition of the reagents and stability of the complex, were evaluated. The molar absorptivity (epsilon) was 3.92x10(4) L mol(-1) cm(-1), and Beer's law was obeyed up to 3 mg L(-1) of copper. The relative standard deviation was 0.46% (n=11) for a sample containing 1 mg L(-1) Cu(II). The limit of detection was 2.5 micro g L(-1) and was therefore more sensitive than the direct methods reported previously. Finally, the method was successfully validated by analysing several real samples with different matrices, such as tap water, natural water or copper alloys, with an average relative error of 2.46%.     

The Reaction of Singlet Oxygen with Adamantylideneadamantane Mediated by Rose Bengal

The photo-oxygenation of adamantylideneadamantane ( 1 ) on siliceous supports using admixed granules of ion-exchange resin fixed to methylene blue (MB) and rose bengal (RB) gave exclusively the corresponding dioxetane derivative 2 for the former sensitizer, while the latter gave 2 and traces of the epoxide 3. RB and the charge-transfer complex produced from N-ethylcarbazole and 2,4,5,6-tetranitrofluoren-9-one both reacted with chemically generated singlet oxygen to give superoxide radical anion. Trapping of the latter with 5,5-dimethyl-1-pyrroline 1-oxide gave an adduct exhibiting a characteristic ESR spectrum. The treatment of 1 in MeOH with 30% aqueous H₂O₂ for 22 h at 60° gave 3 in 100% yield. Repetition of this experiment in the presence of 2,6-di(tert-butyl)-p-cresol caused no significant change. These results indicate that singlet oxygen reacts with 1 , in the presence of RB, by two different processes. The first leads to dioxetane formation. The second process involves conversion of singlet oxygen by RB to superoxide radical anion which subsequently gives H₂O₂ so producing epoxide 3 from 1 .