A convective weakly viscoelastic rotating flow with pressure Neumann condition

The objective of this work is to investigate through the numeric simulation, the effects of the weakly viscoelastic flow within a rotating rectangular duct subject to a buoyancy force due to the heating of one of the walls of the duct. A direct velocity–pressure algorithm in primitive variables with a Neumann condition for the pressure is employed. The spatial discretization is made with finite central differences on a staggered grid. The pressure field is directly updated without any iteration. Numerical simulations were done for several Weissemberg numbers (We) and Grashof numbers (Gr) . The numerical results show that for high Weissemberg numbers (We>7.4 × 10^?5) and for ducts with aspect ratio 2:1 and 8:1, the secondary flow is restabilized with a stretched double vortex configuration. It is also observed that when the Grashof number is increased (Gr>17 × 10^?4) , the buoyancy force neutralizes the effects of the Coriolis force for ducts with aspect ratio 8:1. Copyright © 2008 John Wiley & Sons, Ltd.     

Desirability functions as response in a d‐optimal design for evaluating the extraction and purification steps of six tranquillizers and an anti‐adrenergic by liquid chromatography‐tandem mass spectrometry

Internal standards can be added at different stages of an analytical procedure. When they are added at the beginning of a multiresidue method and their behavior is not exactly the same as that of the analytes, the intended correction for small variations within the analytical process could not be achieved. Because of this, in the present work, the use of d ‐optimal designs together with desirability functions is proposed to state the experimental response under study. The overall desirability function used relates two analytical criteria: to assess a similar chemical behavior of each analyte in relation to its internal standard and to avoid a significant reduction of the absolute peak area of the internal standards. This strategy has been applied to the analysis of the effect of four factors related to the extraction and purification steps of six tranquillizers and a β‐blocker from pig muscle analyzed by liquid chromatography–tandem mass spectrometry. The effect of those factors has been evaluated by means of an ad hoc d ‐optimal design consisting of only 11 experiments. The resulting levels of the four factors that enable to achieve the greatest overall desirability have also been compared with those obtained when either the standardized or absolute peak area has been considered as response. Differences in both the significant factors and their optimum levels have been observed. It is noticeable that the experimental effort necessary to study the effect of the factors has been reduced by more than 50% thanks to the d ‐optimal design. Copyright © 2015 John Wiley & Sons, Ltd.     

Structural and electronic study of neutral,positive, and negative small rhodium clusters [Rhn,Rh, and Rh]

We have carried out a systematic study for the determination of the structure and the fundamental state of neutral and ionic small rhodium clusters [Rh_n, Rh, Rh (n = 5–10)] using ab initio Hartree‐Fock methods with a LANL2DZ basis set. A range of spin multiplicities is studied for each cluster. We present the bond lengths and angles and geometric configuration adopted for the clusters in its minimum energy conformation showing the differences when the clusters have different number of unpaired electrons. In addition, we report the vertical ionization potential and the adiabatic potential calculated by the Koopman's theorem. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem 110:2541–2547, 2010     

Time-dependent density functional approach for the calculation of inelastic x-ray scattering spectra of molecules

We apply time-dependent density functional theory to study the valence electron excitations of molecules and generalize the typically used time-propagation scheme and Casida's method to calculate the full wavevector dependent response function. This allows the computational study of dipole-forbidden valence electron transitions and the dispersion of spectral weight as a function of the wavevector. The method provides a novel analysis tool for spectroscopic methods such as inelastic x-ray scattering and electron energy loss spectroscopy. We present results for benzene and CF(3)Cl and make a comparison with experimental results.     

Ultrafast Decay of the Excited Singlet States of Thioxanthone by Internal Conversion and Intersystem Crossing

The experimental ultrafast photophysics of thioxanthone in several aprotic organic solvents at room temperature is presented, measured using femtosecond transient absorption together with high‐level ab initio CASPT2 calculations of the singlet‐ and triplet‐state manifolds in the gas phase, including computed state minima and conical intersections, transition energies, oscillator strengths, and spin–orbit coupling terms. The initially populated singlet ππ* state is shown to decay through internal conversion and intersystem crossing processes via intermediate nπ* singlet and triplet states, respectively. Two easily accessible conical intersections explain the favorable internal conversion rates and low fluorescence quantum yields in nonpolar media. The presence of a singlet–triplet crossing near the singlet ππ* minimum and the large spin–orbit coupling terms also rationalize the high intersystem crossing rates. A phenomenological kinetic scheme is proposed that accounts for the decrease in internal conversion and intersystem crossing (i.e. the very large experimental crescendo of the fluorescence quantum yield) with the increase of solvent polarity.     

Tetrahydrofuran–water extraction,in-line clean-up and selective liquid chromatography/tandem mass spectrometry for the quantitation of perfluorinated compounds in food at the low picogram per gram level

A new solvent extraction system was developed for extraction of PFCs from food. The extraction is carried out with 75:25 (v/v) tetrahydrofuran:water, a solvent mixture that provides an appropriate balance of hydrogen bonding, dispersion and dipole–dipole interactions to efficiently extract PFCs with chains containing 4–14 carbon atoms from foods. This mixture provided recoveries above 85% from foods including vegetables, fruits, fish, meat and bread; and above 75% from cheese. Clean-up with a weak anion exchange resin and Envi-carb SPE, which were coupled in line for simplicity, was found to minimize matrix effects (viz. enhancement or suppression of electrospray ionization). The target analytes (PFCs) were resolved on a perfluorooctyl phase column that proved effective in separating mass interferences for perfluorooctane sulfonate (PFOS) in fish and meat samples. The mass spectrometer was operated in the negative electrospray ionization mode and used to record two transitions per analyte and one per mass-labeled method internal standard. The target PFCs were quantified from solvent based calibration curves. The limits of detection (LODs) were as low as 1–5 pg analyte g⁻¹ food; by exception, those for C₄ and C₅ PFCs were somewhat higher (25–30 pg g⁻¹) owing to their less favourable mass response. To the best of our knowledge these are among the best LODs for PFCs in foods reported to date. The analysis of a variety of foods revealed contamination with PFCs at levels from 4.5 to 75 pg g⁻¹ in 25% of samples (fish and packaged spinach). C₁₀–C₁₄ PFCs were found in fish, which testifies to the need to control long-chain PFCs in this type of food. The proposed method is a useful tool for the development of a large-scale database for the presence of PFCs in foods.     

Multiresidue analysis of sulfonamides in meat by supramolecular solvent microextraction,liquid chromatography and fluorescence detection and method validation according to the 2002/657/EC decision

A multiresidue method was described for determining eight sulfonamides, SAs (sulfadiazine, sulfamerazine, sulfamethoxypyridazine, sulfachloropyridazine, sulfadoxine, sulfamethoxazole, sulfadimethoxine and sulfaquinoxaline) in animal muscle tissues (pork, chicken, turkey, lamb and beef) at concentrations below the maximum residue limit (100 μg kg⁻¹) set by the European Commission. The method was based on the microextraction of SAs in 300-mg muscle samples with 1 mL of a supramolecular solvent made up of reverse micelles of decanoic acid (DeA) and posterior determination of SAs in the extract by LC/fluorescence detection, after in situ derivatization with fluorescamine. Recoveries were quantitative (98–109%) and matrix-independent, no concentration of the extracts was required, the microextraction took about 30 min and several samples could be simultaneously treated. Formation of multiple hydrogen bonds between the carboxylic groups of the solvent and the target SAs (hydrogen donor and acceptor sum between 9 and 11) were considered as the major forces driving microextraction. The method was validated according to the European Union regulation 2002/657/EC. Analytical performance in terms of linearity, selectivity, trueness, precision, stability of SAs, decision limit and detection capability were determined. Quantitation limits for the different SAs ranged between 12 μg kg⁻¹ and 44 μg kg⁻¹, they being nearly independent of matrix composition. Repeatability and reproducibility, expressed as relative standard deviation, were in the ranges 1.8–3.6% and 3.3–6.1%. The results of the validation process proved that the method is suitable for determining sulfonamide residues in surveillance programs.     

Supramolecular solvent-based microextraction of ochratoxin A in raw wheat prior to liquid chromatography-fluorescence determination

A supramolecular solvent made up of reverse micelles of decanoic acid, dispersed in a continuous phase of THF:water, was proposed for the simple, fast and efficient microextraction of OTA in wheat prior to liquid chromatography-fluorescence determination. The method involved the stirring of 300 mg-wheat subsamples (particle size 50 μm) and 350 μL of supramolecular solvent for 15 min, subsequent centrifugation for 15 min and the direct quantitation of OTA in the extract, previous 5.7-fold dilution with ethanol/water/acetic acid (49.5/49.5/1), against solvent-based calibration curves. No clean-up of the extracts or solvent evaporation was needed. Interactions between the supramolecular solvent and major matrix components in the wheat (i.e. carbohydrates, lipids and proteins) were investigated. The reverse micelles in the extractant induced gluten flocculation but only in the coacervation region of lower analytical interest (i.e. at percentages of THF above 11%). The quantitation of OTA was interference-free. Representativity of the 300 mg-wheat subsamples was proved by analysing a reference material. OTA recoveries in wheat ranged between 84% and 95% and the precision of the method, expressed as relative standard deviation, was 2%. The quantitation limit of the method was 1.5 μg kg⁻¹ and was below the threshold limit established for OTA in raw cereals by EU directives (5.0 μg kg⁻¹). The method developed was validated by using a certified reference material and it was successfully applied to the determination of OTA in different wheat varieties from crops harvested in the South of Spain. OTA was not detected in any of the analysed samples. This method allows quick and simple microextraction of OTA with minimal solvent consumption, while delivering accurate and precise data.