The effect of methyl jasmonate and light irradiation treatments on the stilbenoid biosynthetic pathway in Vitis vinifera cell suspension cultures

Grape stilbenes are a well-known family of plant polyphenolics that have been confirmed to have many biological activities in relation to health benefits. In the present study, we investigated the effect of methyl jasmonate (MeJA) elicitor at four different concentrations (25, 50, 100 and 200 μM) in combination or not with high-level light irradiation (10,000 LUX) on a cell line obtained from the pulp of Vitis vinifera cv. Shahani. Our results showed that the stilbene synthesis pathway is inhibited by high-light conditions. A concentration of 50 μM MeJA was optimum for efficient production and high accumulation of total phenolics and total flavonoids as well as total stilbenoids. Furthermore, we showed that there is a significant negative correlation between the production of these metabolites and cell growth. These data provide valuable information for the future scale-up of cell cultures for the production of these very high value compounds in bioreactor system.     

The pure rotational Raman spectra of cyanogen, C2N2 and C2N2

The pure rotational Raman spectra of C₂¹⁴N₂ and C₂¹⁵N₂ have been recorded photographically using a 3-metre spectrograph with a reciprocal linear dispersion of 1.4 cm⁻¹ mm⁻¹ at 488.0 nm and analysed to give the rotational and centrifugal distortion constants for both species. Corrections were applied to compensate for the effect of molecules in excited vibrational states on the pure rotational spectra. Comparisons are made with previous infrared vibration—rotational studies on these species and with previous Raman studies on C₂¹⁴N₂. The following bond lengths were calculated: r₀(C---N) = 116 ± 1 pm; r₀(C---C) = 138 ± 2 pm.     

Structures and stabilization of low calorific value gas turbulent partially premixed flames in a conical burner

Experiments are carried out on partially premixed turbulent flames stabilized in a conical burner. The investigated gaseous fuels are methane, methane diluted with nitrogen, and mixtures of CH₄, CO, CO₂, H₂ and N₂, simulating typical products from gasification of biomass, and co-firing of gasification gas with methane. The fuel and air are partially premixed in concentric tubes. Flame stabilization behavior is investigated and significantly different stabilization characteristics are observed in flames with and without the cone. Planar laser induced fluorescence (LIF) imaging of a fuel-tracer species, acetone, and OH radicals is carried out to characterize the flame structures. Large eddy simulations of the conical flames are carried out to gain further understanding of the flame/flow interaction in the cone. The data show that the flames with the cone are more stable than those without the cone. Without the cone (i.e. jet burner) the critical jet velocities for blowoff and liftoff of biomass derived gases are higher than that for methane/nitrogen mixture with the same heating values, indicating the enhanced flame stabilization by hydrogen in the mixture. With the cone the stability of flames is not sensitive to the compositions of the fuels, owing to the different flame stabilization mechanism in the conical flames than that in the jet flames. From the PLIF images it is shown that in the conical burner, the flame is stabilized by the cone at nearly the same position for different fuels. From large eddy simulations, the flames are shown to be controlled by the recirculation flows inside cone, which depends on the cone angle, but less sensitive to the fuel compositions and flow speed. The flames tend to be hold in the recirculation zones even at very high flow speed. Flame blowoff occurs when significant local extinction in the main body of the flame appears at high turbulence intensities.     

A new synthesis of highly functionalized 2H-pyran derivatives

Ethyl oxo-(2-oxo-cycloalkyl)-ethanoates undergo a smooth reaction with triphenylphosphine and dialkyl acetylenedicarboxylates via intramolecular Wittig reaction to produce spiro-cyclobutene derivatives. These spiro systems undergo electrocyclic ring opening reaction to produce electron-deficient 1,3-dienes, which spontaneously cyclize to 2H-pyran derivatives.     

Separation of Aliphatic and Aromatic Carboxylic Acids by Conventional and Ultra High-Performance Ion-Exclusion Chromatography

An ion-exclusion chromatography (IELC) comparison between a conventional ion-exchange column and an ultra high-performance liquid chromatography (UHPLC) dynamically surfactant modified C18 column for the separation of an aliphatic carboxylic acid and two aromatic carboxylic acids is presented. Professional software is used to optimize the conventional IELC separation conditions for acetylsalicylic acid and the hydrolysis products: salicylic acid and acetic acid. Four different variables are simultaneously optimized including H₂SO₄ concentration, pH, flow rate, and sample injection volume. Thirty different runs are suggested by the software. The resolutions and the time of each run are calculated and feed back to the software to predict the optimum conditions. Derringer’s desirability functions are used to evaluate the test conditions and those with the highest desirability value are utilized to separate acetylsalicylic acid, salicylic acid, and acetic acid. These conditions include using a 0.35 mM H₂SO₄ (pH 3.93) eluent at a flow rate of 1 mL min^?1 and an injection volume of 72 μL. To decrease the run time and improve the performance, a UHPLC C18 column is used after dynamic modification with sodium dodecyl sulfate. Using pure water as a mobile phase, a shorter analysis time and better resolution are achieved. In addition, the elution order is different from the IELC method which indicates the contribution of the reversed-phase mode to the separation mechanism.     

Highly sensitive FRET-based fluorescence immunoassay for aflatoxin B1 using cadmium telluride quantum dots

We report on a competitive immunoassay for the determination of aflatoxin B1 using fluorescence resonance energy transfer (FRET) from anti-aflatoxin B1 antibody (immobilized on the shell of CdTe quantum dots) to Rhodamine 123 (Rho 123-labeled aflatoxin B1 bound to albumin). The highly specific immunoreaction between the antibody against aflatoxin B1 on the QDs and the labeled-aflatoxin B1 brings the Rho 123 fluorophore (acting as the acceptor) and the QDs (acting as the donor) in close spatial proximity and causes FRET to occur upon photoexcitation of the QDs. In the absence of unlabeled aflatoxin B1, the antigen-antibody complex is stable, and strong emission resulting from the FRET from QDs to labeled aflatoxin B1 is observed. In the presence of aflatoxin B1, it will compete with the labeled aflatoxin B1-albumin complex for binding to the antibody-QDs conjugate so that FRET will be increasingly suppressed. The reduction in the fluorescence intensity of the acceptor correlates well with the concentration of aflatoxin B1. The feasibility of the method was established by the detection of aflatoxin B1 in spiked human serum. There is a linear relationship between the increased fluorescence intensity of Rho 123 with increasing concentration of aflatoxin B1 in spike human serum, over the range of 0.1–0.6 μmol·mL^?1. The limit of detection is 2?×?10^?11 M. This homogeneous competitive detection scheme is simple, rapid and efficient, and does not require excessive washing and separation steps.

MHD mixed convection in an inclined cavity containing adiabatic obstacle and filled with Cu–water nanofluid in the presence of the heat generation and partial slip

Journal of Thermal Analysis and Calorimetry - In the present paper, the performance of the graphene oxide in the solar steam generation has experimentally been examined. For this purpose, a setup...     

Spectral,crystallographic, theoretical and antibacterial studies of palladium(II)/platinum(II) complexes with unsymmetric diphosphine ylides

The reaction of α‐keto‐stabilized diphosphine ylides [Ph₂P(CH₂)_nPPh₂═C(H)C(O)C₆H₄‐p‐CN] (n = 1 (Y¹); n = 2 (Y²)) with dibromo(1,5‐cyclooctadiene) palladium(II)/platinum(II) complexes, [Pd/PtBr₂(cod)], in equimolar ratio gave the new cyclometalated Pd(II) and Pt(II) complexes [Br₂Pd(κ²‐Y¹)] ( 1 ), [Br₂Pt(κ²‐Y¹)] ( 2 ), [Br₂Pd(κ²‐Y²)] ( 3 ) and [Br₂Pt(κ²‐Y²)] ( 4 ). These compounds were screened in a search for novel antibacterial agents and characterized successfully using Fourier transfer infrared and NMR (¹H, ¹³C and ³¹P) spectroscopic methods. Also, the structures of complexes 1 and 2 were characterized using X‐ray crystallography. The results showed that the P,C‐chelated complexes 1 and 2 have structures consisting of five‐membered rings, while 3 and 4 have six‐membered rings, formed by coordination of the ligand through the phosphine group and the ylidic carbon atom to the metal centre. Also, a theoretical study of the structures of complexes 1 – 4 was conducted at the BP86/def2‐SVP level of theory. The nature of metal–ligand bonds in the complexes was investigated using energy decomposition analyses (EDA) and extended transition state combined with natural orbitals for chemical valence analyses. The results of EDA confirmed that the main portions of ΔE_int, about 57–58%, in the complexes are allocated to ΔE_elstat.     

Magnetic Polymer Composite Particles Via In situ Inverse Miniemulsion Polymerization Process

We aimed at preparing magnetic iron oxide particles by the oxidation-precipitation method in order to encapsulate these particles in polymer matrices composed of poly(acrylamide-styrene sulfonic acid sodium salt). Nanocomposites were synthesized by the incorporation of surface treated magnetic nanoparticles in the synthesized polymers via in situ inverse mini-emulsion polymerization process. The study parameter was the ionic monomer content in the synthesized polymers. The structure and the morphology of the magnetic nanogels were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS), thermal gravimetric analysis (TGA) and scanning electron microscopy (SEM). FTIR and XRD showed that pure magnetite was formed and successfully encapsulated in the composite nanoparticles. The polymer encapsulation could reduce the susceptibility to leaching and could protect the magnetite particle surfaces from oxidation. The ionic monomer content had a great effect on the magnetization behavior. Magnetite prepared by the oxidation precipitation method, of 50 nm mean particle size, was embedded successfully into the polymer nanogels with a reasonable magnetic response, as proved by vibrating sample magnetometer measurement. Magnetic nanocomposites were proven to be super-ferromagnetic materials.     

Chromium(VI) Based Oxidants III.1,2 Ferric Dichromate,Polyvinylpyridine Supported Zinc,and Ferric Dichromates as New Oxidizing Agents

Ferric dichromate, polyvinylpyridine supported zinc and ferric dichromates complexes are prepared and used as stable, mild, and efficient oxidizing reagents for the oxidation of different organic compounds. Ferric dichromate complex is more efficient.