Organic contamination in clams,Venerupis aurea laeta and Cerastoderma edule glaucum,from Sicily (Italy)

Two species of edible clams Venerupis aurea laeta and Cerastoderma edule glaucum from Ganzirri Lake (Sicily, Italy) were investigated to determine OCP and PCB residues by GC-MS. Thirty-five samples were examined for two years in order to perform: a) their actual contamination; b) the daily dietary exposure of seafood consumers to the pollutants in question. In all the clams analysed in this study, PCB and OCP (4,4′-DDE) residues are always below the limits fixed by law. It seems that there is some seasonality of concentrations observed. In fact the more high concentrations of residues are detected in the hot months, for both species and years. Given the consumption of clams and the values obtained in this study for the two species analysed, it is possible estimate that the average daily dietary intake of NDL-PCB and of 4,4′-DDE for adults is really low.     

Unsteady MHD free convective heat and mass transfer from a vertical porous plate with Hall current,thermal radiation and chemical reaction effects

An analysis is presented to investigate the effects of chemical reaction, thermal radiation and heat generation or absorption on unsteady free convective heat and mass transfer along an infinite vertical porous plate in the presence of a transverse magnetic field and Hall current. The governing partial differential equations are formulated and transformed by using a similarity transformation into a system of ordinary differential equations. The resulting equations are solved numerically using a fourth‐order Runge–Kutta scheme along with the shooting method. The Rosseland approximation is used to describe the radiative heat flux in the energy equation. Numerical results for the velocity, temperature and concentration distributions are shown graphically for different parametric values. The effects of parameters on the local friction coefficients, the Nusselt number and Sherwood numbers are depicted in tabulated form. Copyright © 2009 John Wiley & Sons, Ltd.     

Structures and stabilization of low calorific value gas turbulent partially premixed flames in a conical burner

Experiments are carried out on partially premixed turbulent flames stabilized in a conical burner. The investigated gaseous fuels are methane, methane diluted with nitrogen, and mixtures of CH₄, CO, CO₂, H₂ and N₂, simulating typical products from gasification of biomass, and co-firing of gasification gas with methane. The fuel and air are partially premixed in concentric tubes. Flame stabilization behavior is investigated and significantly different stabilization characteristics are observed in flames with and without the cone. Planar laser induced fluorescence (LIF) imaging of a fuel-tracer species, acetone, and OH radicals is carried out to characterize the flame structures. Large eddy simulations of the conical flames are carried out to gain further understanding of the flame/flow interaction in the cone. The data show that the flames with the cone are more stable than those without the cone. Without the cone (i.e. jet burner) the critical jet velocities for blowoff and liftoff of biomass derived gases are higher than that for methane/nitrogen mixture with the same heating values, indicating the enhanced flame stabilization by hydrogen in the mixture. With the cone the stability of flames is not sensitive to the compositions of the fuels, owing to the different flame stabilization mechanism in the conical flames than that in the jet flames. From the PLIF images it is shown that in the conical burner, the flame is stabilized by the cone at nearly the same position for different fuels. From large eddy simulations, the flames are shown to be controlled by the recirculation flows inside cone, which depends on the cone angle, but less sensitive to the fuel compositions and flow speed. The flames tend to be hold in the recirculation zones even at very high flow speed. Flame blowoff occurs when significant local extinction in the main body of the flame appears at high turbulence intensities.     

A stereoselective synthesis of (+)-L-733,060 from ethyl (R)-(+)-2,3-epoxypropanoate

An asymmetric synthesis of neurokinin substance P receptor antagonist (+)-L-733,060 starting from enantiomerically pure ethyl (R)-(+)-2,3-epoxypropanoate (ethyl glycidate) is described. The synthesis relies on a diastereoselective reductive amination, regioselective intramolecular epoxide opening, and in situ cyclization as the key steps.     

Weight Function Approach to q-Difference Equations for the q-Hypergeometric Polynomials

In this paper we define a new algebra generated by the difference operators D _q and D _q-1 with two analytic functions (x) and (x). Also, we define an operator M = J ₁ J ₂–J ₃ J ₄ s.t. all q-hypergeometric orthogonal polynomials Y _n(x), x cos(), are eigenfunctions of the operator M with eigenvalues _q [n] _q . The choice of (x) and (x) depend on the weight function of Y _n (x).     

Identification of proteases employed by dendritic cells in the processing of protein purified derivative (PPD)

Dendritic cells (DC) are known to present exogenous protein Ag effectively to T cells. In this study we sought to identify the proteases that DC employ during antigen processing. The murine epidermal-derived DC line Xs52, when pulsed with PPD, optimally activated the PPD-reactive Th1 clone LNC.2F1 as well as the Th2 clone LNC.4k1, and this activation was completely blocked by chloroquine pretreatment. These results validate the capacity of XS52 DC to digest PPD into immunogenic peptides inducing antigen specific T cell immune responses. XS52 DC, as well as splenic DC and DCs derived from bone marrow degraded standard substrates for cathepsins B, C, D/E, H, J, and L, tryptase, and chymases, indicating that DC express a variety of protease activities. Treatment of XS52 DC with pepstatin A, an inhibitor of aspartic acid proteases, completely abrogated their capacity to present native PPD, but not trypsin-digested PPD fragments to Th1 and Th2 cell clones. Pepstatin A also inhibited cathepsin D/E activity selectively among the XS52 DC-associated protease activities. On the other hand, inhibitors of serine proteases (dichloroisocoumarin, DCI) or of cystein proteases (E-64) did not impair XS52 DC presentation of PPD, nor did they inhibit cathepsin D/E activity. Finally, all tested DC populations (XS52 DC, splenic DC, and bone marrow-derived DC) constitutively expressed cathepsin D mRNA. These results suggest that DC primarily employ cathepsin D (and perhaps E) to digest PPD into antigenic peptides.     

Microstructure characterization and magnetic behavior of NiAlxFe2−xO4 and Ni1−yMnyAl0.2Fe1.8O4 ferrites

NiAl_xFe_2−xO₄ and Ni_1−yMn_yAl_0.2Fe_1.8O₄ ferrites were prepared by the conventional ceramic method and were characterized by X-ray diffraction, scanning electron microscopy, and magnetic measurements. The single spinel phase was confirmed for all prepared samples. A proper explanation of data is possible if the Al³⁺ ions are assumed to replace Fe³⁺ ions in the A and B sites simultaneously for NiAl_xFe_2−xO₄ ferrites, and if the Mn²⁺ ions are assumed to replace Ni²⁺ ions in the B sites for Ni_1−yMn_yAl_0.2Fe_1.8O₄ ferrites. Microstructural factors play an important role in the magnetic behavior of Ni_1−yMn_yAl_0.2Fe_1.8O₄ ferrites with large Mn²⁺ content.     

An efficient evolutionary multi-objective framework for MEMS design optimisation: validation, comparison and analysis

The application of multi objective evolutionary algorithms (MOEA) in the design optimisation of microelectromechanical systems (MEMS) is of particular interest in this research. MOEA is a class of soft computing techniques of biologically inspired stochastic algorithms, which have proved to outperform their conventional counterparts in many design optimisation tasks. MEMS designers can utilise a variety of multi-disciplinary design tools that explore a complex design search space, however, still follow the traditional trial and error approaches. The paper proposes a novel framework, which couples both modelling and analysis tools to the most referenced MOEAs (NSGA-II and MOGA-II). The framework is validated and evaluated through a number of case studies of increasing complexity. The research presented in this paper unprecedentedly attempts to compare the performances of the mentioned algorithms in the application domain. The comparative study shows significant insights into the behaviour of both of the algorithms in the design optimisation of MEMS. The paper provides extended discussions and analysis of the results showing, overall, that MOGA-II outperforms NSGA-II, for the selected case studies.     

Neutron Matter Properties Using Skyrme Interaction

The purpose of the present work is to extend earlier nuclear matter calculations to study the properties of neutron matter. The binding energy per particle, symmetry energy, single particle potential, effective mass, and magnetic susceptibility are calculated using a modified Skyrme interaction. These are calculated as a function of the Fermi momentum k_f in the range 0 < k_f < 2 fm^?1. Two sets of the interaction parameters are obtained by fitting the interaction parameters using the available information on neutron matter. Relativistic corrections to the order 1/c² are also calculated. The relativistic corrections are very small and they increase as k_f is increased.     

Structure and stability characteristics of turbulent planar flames with inhomogeneous jet in a concentric flow slot burner

Turbulent flames with compositionally inhomogeneous mixtures are common in many combustion systems. Turbulent jet flames with a circular nozzle burner were used earlier to study the impact of inhomogeneous mixtures, and these studies showed that the nozzle radius affects the flame stability. Accordingly, planar turbulent flames with inhomogeneous turbulent jet are created in a concentric flow slot burner (CFSB) to avoid this effect in the present study. The stability characteristics, the mixing field structure, and the flame front structure were measured, and the correlations between stability and the mixing field structure were investigated. The mixture fraction field was measured in non-reacting jets at the nozzle exit using highly resolved Rayleigh scattering technique, and the flame front was measured in some selected turbulent flames using high-speed Planar Laser-Induced Fluorescence (PLIF) of OH technique. The data show strong correlations between flame stability and the range of mixture fraction fluctuations. The flames are highly stabilized within a mixing field environment with the range of fluctuation in mixture fraction close to the range of the flammability limits. The mixing field structure is also illustrated and discussed using a mixing regime diagram and showed that the scatter of the data of the different cases is consistent with the classified mixing regimes. Lean flames are stabilized in the current slot burner. The flame front structure topology varies consistently from thin, small curvature at the low level of turbulence and higher equivalence ratio to more wrinkled, larger curvature, but a thicker structure at a higher level of turbulence and lower equivalence ratio.