负载咖啡因-活性炭新吸附材料对钼(VI)的吸附行为的研究

以生物碱（咖啡因）为衍生化试剂，用浸渍法使其负载于活性炭（ＡＣ）上，制成一种新的金属阴离子吸附材料———负载咖啡因－活性炭（ＣＡＣ）。用ＩＣＰ－ＡＥＳ研究了该吸附材料对金属阴离子［Ｍｏ７Ｏ２４］６－的吸附性能；考察了其化学稳定性；还研究了不同浓度硫酸和氨水对待测物吸附率和解脱率的影响及共存离子的干扰影响。     

反式N-3-炔丁烯基咔唑的合成及其齐聚行为

在65 ℃、氮气保护下, 往咔唑钠的四氢呋喃溶液中缓慢滴加1,4-二氯-2-丁炔. 反应9 h后, 在苯和石油醚混合溶剂中重结晶, 分离得到反式N-3-炔丁烯基咔唑. 在加热, BPO, BF₃, FeCl₃, P₂O₅, 紫外或可见光的引发作用下, 反式N-3-炔丁烯基咔唑发生齐聚反应. 通过元素分析, IR, ¹H NMR, MS, UV等方法对反应产物进行分析表征. IR和¹H NMR图谱显示单体聚合后炔基及其相连氢原子的特征吸收峰(ν: 3278, 2099 cm^－1; : 2.8～3.0)消失, VPO法测得齐聚物分子量在8.3×10²至1.9×10³之间(聚合度4～9).     

Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.     

Mo对Ni/ZnO催化乙醇水蒸气重整制氢性能的影响

考察了Mo及温度对Ni/ZnO催化乙醇水蒸气重整制氢的活性、选择性和抗积炭性能的影响。结果表明，773K适量添加Mo能提高Ni/ZnO催化剂的活性和氢气选择性；Ni/ZnO及Ni-Mo/ZnO催化剂的活性随着温度的升高而提高，823K乙醇完全转化；873K时，Mo质量分数为0.83%的Ni-Mo/ZnO催化剂对氢气的选择性最高；添加Mo可以提高Ni/ZnO催化剂的抗积炭能力，从而提高该催化剂的稳定性。程序升温还原（TPR）和X射线衍射（XRD）结果表明，添加Mo有利于Ni氧化物在载体上的分散；减弱氧化态镍物种与载体之间的作用，从而提高了催化剂的活性、选择性和稳定性。     

L—氨基酸氧化酶电极的制作及电极特性的研究

报道了一种新的Ｌ－氨基酸氧化酶电极，这种酶电极系由氨气敏电极和以氨基化玻璃布为载体的酶膜所组成；研究了固定化条件对酶膜活性的影响以及底物浓度、温度和ｐＨ对电极响应特性的影响。该电极在６．０×１０＾－５～４．０×１０＾－３ｍｏｌ／Ｌ的底物浓度范围内呈良好的线性关系，检测下限为５．０×１０＾－５ｍｏｌ／Ｌ。在最宜条件下，酶电极具有良好的稳定性。     

含氰基侧基聚芳醚砜的合成与表征

汉２，６－二卤苯甲腈、４，４′－二氯二苯砜、４，４′－二羟基二苯砜、间苯二酚、对苯二酚、酚酞及双酚Ａ为主要原料，合成了含不同结构单元和不同氰基含量的含氰基侧基的聚芳醚砜，并采用ＩＲ、＾１３ＣＮＭＲ等分析手段对其结构进行了表征，同时研究了结构单元和氰基含量对聚芳醚砜性能的影响。     

微乳液介质—1—（2—吡啶偶氮）—2—萘酚光度法测定汽油中环烷酸铁的含量

本研究了微乳液为介质时，铁与１－（２－吡啶偶氮）－２－萘酚（ＰＡＮ）的显色反应。选择７３０ｎｍ处为测定波长，ε为１．４×１０＾４Ｌ．ｍｏｌ＾－＾１．ｃｍ＾－＾１，铁量在０－５０μｇ／２５ｍｌ范围内符合比耳定律，该法适用于汽油中环烷酸铁的测定。     

植物生物分子的电分析化学研究——Ⅸ.多酚氧化酶活性的脉冲极谱法测定

本文用微分脉冲极谱法研究了多酚氧化酶的活性测定和酶的反应动力学。应用于马铃薯等10余种植物样品的酶活力测定,结果良好。方法简便快速,重现性好。     

Tri-component diblock copolymers of poly(ethylene glycol)–poly(ε-caprolactone-<Emphasis Type="Italic">co</Emphasis>-lactide): synthesis,characterization and loading camptothecin

Biodegradable tri-component diblock copolymer was synthesized by bulk copolymerization of ε-caprolactone (CL) and D, L-lactide (LA) in the presence of methoxy poly(ethylene glycol) (MePEG), using stannous octoate as catalyst. Their chemical structure and physical properties were investigated by GPC, NMR, DSC, TGAand XRD. The increase of CL/LA ratio in the diblock copolymer leads to lower T _g, higher decomposition temperature and crystallinity. Nanoparticles formulated from MePEG–poly(CL-co-LA) (PCAE) possess spherical structure, which was characterized by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The DLS results indicate that the particle size increased with the increase of CL/LA ratio and the hydrophobic fragment length in the copolymer. The drug encapsulation efficiency and the drug release behavior in vitro conditions of camptothecin were measured by high performance liquid chromatography (HPLC). The encapsulation efficiency can be achieved as high as 84.4% and the release behavior can be made well-controlled. MePEG–poly(CL-co-LA) nanoparticles might have a great potential as carriers for hydrophobic drugs.