Equilibrium studies of Mn(II), Mg(II), Ca(II), Sr(II) and Ba(II) withp-fluoro-,p-chloro-,p-bromo-,p-methyl-benzoylacetones and 1-(4-fluorophenyl)-1,3-pentanedione

The rawpH-data, obtained from the potentiometric titrations of the titled ligands with NaOH in 75% (v/v) dioxane-water mixture performed at 20, 30 and 40°C at constant ionic strength (=0.1M-NaClO₄), have been adequately corrected for dilution, and solvent effects in order to evaluate thermodynamic dissociation constants. Variance of the latter as a function of temperature has also been accounted for. The differing magnitudes of thermodynamic dissociation constants of the titled ligands have been explained on the basis of the non coplanar orientation of the phenyl ring in the ligands and a comparison has been made with those of unsubstituted benzoylacetone, dibenzoylmethane and acetylacetone.Following similar technique, thermodynamic stepwise and overall formation constants of the titled metal-ligand systems have been obtained and the results correlated with ligand basicity inverse metal crystal radii and second potentials of metals. Decrease in the free enthalpy (–G) of complexation reaction has also been evaluated.

---

Untersuchung der Gleichgewichte von Mn(II), Mg(II), Ca(II), Sr(II) und Ba(II) mit p-Fluor-, p.-Chlor-, p-Brom-, p-Methyl-benzoylaceton und 1-(4-Fluorphenyl)-1,3-pentanedion

Zusammenfassung Aus der potenitometrischen Titration der Titelverbindungen mit NaOH in 75 (v/v) Dioxan—Wasser bei, 20, 30 und 40°C bei konstanter Ionenstärke (=0,1M-NaClO₄) wurden die thermodynamischen Dissoziationskonstanten ermittelt. Verdünnungs-, Lösungsmittel-und Temperatureffekte wurden berücksichtigt. Die unterschiedlichen Dissoziationskonstanten werden mit der Nichtplanarität des Phenylrings in den Liganden erklärt. Außerdem wurden die Komplexbildungskonstanten bestimmt; sie sind in die Diskussion miteinbezogen.

     

Electronic, cyclic voltammetry, IR and EPR spectral studies of copper(II) complexes with 12-membered N4, N2O2 and N2S2 donor macrocyclic ligands

A new series of copper(II) complexes have been synthesized with macrocyclic ligands having three different donating atoms in the macrocyclic ring. It has been shown that the stereochemistry of complexes is dependent on the coordinated anions. These complexes are characterized by various physicochemical techniques, viz. elemental analysis, molar conductance, magnetic susceptibility measurements, IR, electronic, 1H NMR and EPR spectral studies. Cyclic voltammetric behavior of the complexes has also been discussed. The observed anisotropic g-values indicate that the chloro and acetato complexes are six-coordinate tetragonal. Whereas the sulfato and nitrato complexes are found to have five-coordinate square-pyramidal and four-coordinate square-planar geometry, respectively.     

Oxidation of cyclohexane with molecular oxygen using a Schiff base cobalt complex bonded to carbamate-modified silica gel

The Schiff base [1,2-bis(salicylidene amino)phenylene]cobalt(II) complex, chemically bonded to a carbamate-modified silica gel catalyst, has been prepared by a four step procedure. The oxidation of cyclohexane was studied in the presence of this catalyst under relatively mild conditions (150–200 °C, 15–20 atm) using molecular oxygen. The catalyst was found to be very selective for the production of cyclohexanol, with cyclohexanone formed in only a small amount (45:1). This is in contrast to the commercially available processes in which cyclohexanol and cyclohexanone are both formed in appreciable amounts. The t.g.a. analysis shows the catalyst to be stable up to 211 °C and atomic absorption spectroscopy indicated negligible metal loss during 50 h use of the catalyst up to 180 °C.     

Differential pulse polarographic determination of trace amounts of vanadium and molybdenum in various standard alloys and environmental samples after preconcentration of their morpholine-4-carbodithioates on microcrystalline naphthalene or morpholine-4-dithiocarbamate cetyltrimethyl-ammonium bromide-naphthalene adsorbent

A highly selective, sensitive, and fairly rapid and economical differential pulse polarographic (DPP) method has been reported for the determination of trace amounts of vanadium and molybdenum in standard alloys and various environmental samples. The morpholine-4-carbodithioates of these metals were retained (>99% recovery) quantitatively on microcrystalline naphthalene in the pH range 4.5-6.9 for vanadium and 1.5-4.5 for molybdenum. These metals were determined by DPP after desorption with 10 ml of 1 M HCl. Vanadium and molybdenum may also be preconcentrated by passing their aqueous solutions under similar conditions on morpholine-4-dithiocarbamate CTMAB-naphthalene adsorbent packed in a column at a flow rate of 1-5 ml min(-1) and determined similarly. The detection limits are 0.20 ppm for vanadium and 0.04 ppm for molybdenum at minimum instrumental settings (signal to noise ratio=2). The linearity is maintained in the following concentration ranges, vanadium 0.50-10.0 and molybdenum 0.10-9.0 ppm, with a correlation factor of 0.9996 (confidence interval of 95%, slopes 0.0196 and 0.01497 muA mug(-1), intercepts 3.65x10(-3) and -1.92x10(-3) respectively) and relative standard deviation of 1.1% in the microcrystalline method, while in the column method, the linearity is maintained in the concentration ranges, 0.50-6.5 for vanadium and 0.10-5.5 ppm for molybdenum with correlation factor of 0.9994 (with confidence interval of 95%, slopes 0.0194, 0.015 muA mug(-1), intercepts 3.60x10(-3) and -1.90x10(-3) respectively) and relative standard deviation of 1.4%. Various parameters such as the effect of pH, reagent, naphthalene and CTMAB concentrations, volume of aqueous phase and interference of a large number of metal ions on the estimation of vanadium and molybdenum have been studied in detail to optimize the conditions for their voltammetric determination at trace level in various standard alloys and environmental samples.     

Analysis of degradation products by thermal volatilization analysis at subambient temperatures

In the subambient thermal volatilization analysis (TVA) technique, degradation products initially at ?196°C are allowed to warm up to ambient temperature in a controlled manner under vacuum conditions, and volatilization from the sample tube to a trap at ?196°C is monitored by means of a Pirani gauge. The technique is discussed in relation to earlier TVA work in which volatilization from a heated polymer sample was followed. Design and operation of a subambient TVA system are described, and examples of the application of the technique to the study of the degradation products of seven polymers are considered.     

Self-assembled metallasupramolecular cages towards light harvesting systems for oxidative cyclization

Designing artificial light harvesting systems with the ability to utilize the output energy for fruitful application in aqueous medium is an intriguing topic for the development of clean and sustainable energy. We report here facile synthesis of three prismatic molecular cages as imminent supramolecular optoelectronic materials via two-component coordination-driven self-assembly of a new tetra-imidazole donor (L) in combination with 180°/120° di-platinum(ii) acceptors. Self-assembly of 180° trans-Pt(ii) acceptors A1 and A2 with L leads to the formation of cages Pt₄L₂(1a) and Pt₈L₂(2a) respectively, while 120°-Pt(ii) acceptor A3 with L gives the Pt₈L₂(3a) metallacage. PF₆⁻ analogues (1b, 2b and 3b) of the metallacages possess a high molar extinction coefficient and large Stokes shift. 1b–3b are weakly emissive in dilute solution but showed aggregation induced emission (AIE) in a water/MeCN mixture as well as in the solid state. AIE active 2b and 3b in aqueous (90% water/MeCN mixture) medium act as donors for fabricating artificial light harvesting systems via Förster resonance energy transfer (FRET) with organic dye rhodamine-B (RhB) with high energy efficiency and good antenna effect. The metallacages 2b and 3b represent an interesting platform to fabricate new generation supramolecular aqueous light harvesting systems with high antenna effect. Finally, the harvested energy of the LHSs (2b + RhB) and (3b + RhB) was utilized successfully for efficient visible light induced photo-oxidative cross coupling cyclization of N,N-dimethylaniline (4) with a series of N-alkyl/aryl maleimides (5) in aqueous acetonitrile with dramatic enhancement in yields compared to the reactions with RhB or cages alone.

Synthesis of Pt(ii) based metallacages as aggregation induced emissive supramolecular architectures for fabricating artificial light harvesting systems for cross coupling cyclization under visible light is achieved.     

An efficient synthesis of the constrained peptidomimetic 2-oxo-3-(N-9-fluorenyloxycarbonylamino)-1-azabicyclo[4.3.0]nonane-9-carboxylic acid from pyroglutamic acid

[reaction: see text] Azabicyclo[X.Y.0]alkane amino acids are rigid dipeptide mimetics that are useful tools for structure-activity studies in peptide-based drug discovery. Herein, we report an efficient synthesis of three diastereomers of 9-tert-butoxycarbonyl-2-oxo-3-(N-tert-butoxycarbonylamino)-1-azabicyclo[4.3.0]nonane (3S,6S,9S, 3S,6R,9R, and 3S,6R,9S). Methyl N-Boc-pyroglutamate is cleaved with vinylmagnesium bromide to produce an acyclic gamma-vinyl ketone. Michael addition of N-diphenylmethyleneglycine tert-butyl ester produces the N-Boc-delta-oxo-alpha,omega-diaminoazelate intermediate, which, on hydrogenloysis, gives the fused ring system. Acidolytic deprotection followed by Fmoc-protection provided building blocks suitable for solid-phase synthesis.     

Complex formation of isocytosine tautomers with PdII and PtII

Isocytosine (ICH) exists in solution as two major tautomers, the keto form with N1 carrying a proton (1a) and the keto form with N3 being protonated (1b). In water, 1a and 1b exist in equilibrium with almost equal amounts of both forms present. Reactions with a series of Pd(II) and Pt(II) am(m)ine species such as (dien)Pd(II), (dien)Pt(II), and trans-(NH(3))(2)Pt(II) reveal, however, a distinct preference of these metals for the N3 site, as determined by (1)H NMR spectroscopy. Individual species have been identified by the pD dependence of the ICH resonances. pK(a) values (calculated for H(2)O) for deprotonation of the individual tautomers complexes are 6.5 and 6.4 for the N3 linkage isomers of dienPd(II) and dienPt(II), respectively, as well as 6.2 and 6.0 for the N1 linkage isomers. The dimetalated species [(dienM)(2)(IC-N1,N3)](3+) (M = Pd(II) or Pt(II)) are insensitive over a wide range of pD. The crystal structure analysis of [(dien)Pd(ICH-N3)](NO(3))(2) is reported. Ab initio calculations have been performed for tautomer compounds of composition [(NH(3))(3)Pt(ICH)](2+), cis- and trans-[(NH(3))(2)PtCl(ICH)](+), as well as trans-[(NH(3))(2)Pt(ICH)(2)](2+). Without exception, N3 linkage isomers are more stable, in agreement with experimental findings. As to the reasons for this binding preference, an NBO (natural bond orbital) analysis for [(NH(3))(3)Pt(ICH-N3)](2+)strongly suggests that intramolecular hydrogen bonding between trans-positioned NH(3) ligands and the two exocyclic groups of the ICH is of prime importance. The calculations furthermore show a marked pyramidalization of the NH(2) group of ICH in the complex once the heterocyclic ligand forms a dihedral angle <90 degrees with the Pt coordination plane.     

Parallel synthesis of PNA-peptide conjugate libraries

An optimized semi-automatic protocol for parallel synthesis of up to 96 peptide nucleic acids (PNA) or PNA-peptide conjugates using Boc-protection strategy has been developed using a robotic system. The approach is illustrated by synthesizing PNA and PNA-peptide libraries varying between 15 and 27 amino acid units. The peptides (NLS (nuclear localization signal) or Tat-peptide) were attached to N-terminus of the PNA. The method was found to be far superior to that based on the SPOT/Fmoc protocol by which PNA oligomers are synthesized on a modified cellulose membrane. On a 0.5 micromole scale the method typically yielded 2 mg product of 90% purity by HPLC/MALDI-TOF analysis. This approach is suitable for screening of a large number of PNA and/or peptide sequences for biochemical and biological studies.