Reversible Self‐Assembly of Carboxylated Peptide‐Functionalized Gold Nanoparticles Driven by Metal‐Ion Coordination

Carboxylated peptide‐functionalized gold nanoparticles (peptide‐GNPs) self‐assemble into two‐ and three‐dimensional nanostructures in the presence of various heavy metal ions (i.e. Pb²⁺, Cd²⁺, Cu²⁺, and Zn²⁺) in aqueous solution. The assembly process is monitored by following the changes in the surface plasmon resonance (SPR) band of gold nanoparticles in a UV/Vis spectrophotometer, which shows the development of a new SPR band in the higher‐wavelength region. The extent of assembly is dependent on the amount of metal ions present in the medium and also the time of assembly. TEM analysis clearly shows formation of two‐ and three‐dimensional nanostructures. The assembly process is completely reversible by addition of alkaline ethylenediaminetetraacetic acid (EDTA) solution. The driving force for the assembly of peptide‐GNPs is mainly metal ion/carboxylate coordination. The color and spectral changes due to this assembly can be used for detection of these heavy‐metal ions in solution.     

Multiresidue analysis of multiclass plant growth regulators in grapes by liquid chromatography/tandem mass spectrometry

A selective and rapid multiresidue analysis method is presented for simultaneous estimation of 12 plant growth regulators (PGRs), namely, auxins (indol-3-acetic acid, indol-3-butyric acid, and naphthyl acetic acid), cytokinins (kinetin, zeatin, and 6-benzyladenine), gibberellic acid (GA3), abscisic acid, and synthetic compounds, namely, forchlorfenuron, paclobutrazole, isoprothiolane, and 2,4-dichlorophenoxy acetic acid (2,4-D) in bud sprouts and grape berries at the development stages of 2-3 and 6-8 mm diameters, which are the critical phases when exogenous application of PGRs may be necessary to achieve desired grape quality and yield. The sample preparation method involved extraction of plant material with acidified methanol (50%) by homogenization for 2 min at 15000 rpm. The pH of the extract was enhanced up to 6 by adding ammonium acetate, followed by homogenization and centrifugation. The supernatant extract was cleaned by SPE on an Oasis HLB cartridge (200 mg, 6 cc). The final extract was measured directly by LC/MS/MS with electrospray ionization in positive mode, except for 2,4-D, GA3, and abscisic acid extracts, which required analysis in negative mode. Quantification by multiple reaction monitoring (MRM) was supported with full-scan mass spectrometric confirmation using "information-dependent acquisition" triggered with MRM to "enhanced product ionization" mode of the hybrid quadrupole-ion trap mass analyzer. The LOQ of the test analytes varied between 1 and 10 ng/g with associated recoveries of 80-120% and precision RSD <25% (n = 8). Significant matrix-induced signal suppression was recorded when the responses for pre- and postextraction spikes of analytes were compared; this could be resolved by using matrix-matched calibration standards. The method could successfully be applied in analyzing incurred residue samples and would, therefore, be useful in precisely deciding the necessity and dose of exogenous applications of PGRs on the basis of measured endogenous levels.     

A nano-confined charged layer defies the principle of electrostatic interaction

The reactivity between two charged molecules and the activity of charged biomolecules are mainly governed by the principle of electrostatic interaction, i.e., like charges repel and opposite charges attract. In the present study it is shown that the principle of electrostatic interaction is violated in the nano-confined biomimetic environment. Thus a positively charged molecule shows more preference to a positively charged surface compared to a negatively charged surface.     

Thiacalix[4]arene based reconfigurable molecular switches: set-reset memorized sequential device

The fluorescent chemosensors 3, 5 and 7 based on thiacalix[4]arene bearing naphthyl groups have been designed and synthesized. The optical chemosensor 3 based on a thiacalix[4]arene of cone conformation behaves as "turn-on" optical chemosensor for Fe(3+) and F(-) ions. However, chemosensors 5 and 7 based on a thiacalix[4]arene of 1,3-alternate conformation demonstrate "turn-on" optical behaviour for Hg(2+), F(-) ions (with receptor 5 as turn-on for K(+) ions also) and "turn-off" behaviour for Fe(3+) ions. The simultaneous presence of Fe(3+) and Hg(2+) or K(+) or F(-) ions results in formulation of reversible "on-off" switches. Various molecular logic gates developed in response to molecular switching between these chemical inputs have been integrated into sequential logic circuits with memory function in a feedback loop which mimics "set-reset" molecular level information processing device.     

Electrically driven oxygen separation through gadolinia-doped ceria using PrBaCo2O5?+?x and NdBaCo2O5?+?x electrodes

Oxygen gas can be electrochemically separated from ambient air with very high purity and compressed by using a solid-electrolyte ion-transport membrane. An electrolyte with high ionic conductivity such as gadolinium-doped ceria (CGO) and mixed conducting electrodes are used to construct the electrochemical cell. To achieve high oxygen flux, the electrodes must exhibit very fast electrode kinetics. Here, we report the performances of mixed conducting PrBaCo₂O_5 + x and NdBaCo₂O_5 + x electrodes in oxygen separation in a planar CGO electrolyte-supported cell. The properties of the electrode materials were evaluated using potentiostatic and potentiodynamic measurements and alternating current impedance spectroscopy. The oxygen flux was also measured using gas chromatography to confirm the absence of gas leaks. The electrodes demonstrated very low polarization resistances as a result of very high cathodic and anodic reaction rates at temperatures of 600–800 °C. High oxygen gas flow rates were observed on applying potentials up to 1 V with an almost linear relationship between the applied potential and the molar flow rate of oxygen gas.     

Methotrexate intercalated ZnAl-layered double hydroxide

The anticancerous drug methotrexate (MTX) has been intercalated into an ZnAl-layered double hydroxide (LDH) using an anion exchange technique to produce LDH-MTX hybrids having particle sizes in the range of 100-300 nm. X-ray diffraction studies revealed increases in the basal spacings of ZnAl-LDH-MTX hybrid on MTX intercalation. This was corroborated by the transmission electron micrographs, which showed an increase in average interlayer spacing from 8.9 Å in pristine LDH to 21.3 Å in LDH-MTX hybrid. Thermogravimetric analyses showed an increase in the decomposition temperature for the MTX molecule in the LDH-MTX hybrid indicating enhanced thermal stability of the drug molecule in the LDH nanovehicle. The cumulative release profile of MTX from ZnAl-LDH-MTX hybrids in phosphate buffer saline (PBS) at pH 7.4 was successfully sustained for 48 h following Rigter-Peppas model release kinetics via diffusion.     

Sol-gel synthesis,characterisation, and photocatalytic activity of porous spinel Co3O4 nanosheets

Mesoporous spinel Co₃O₄ nanosheets were synthesised via a simple sol-gel route using the Pluronic P123 triblock copolymer as the stabilising agent. Their structural, morphological, and textural properties were characterised. FTIR spectrum revealed the formation of cobalt oxide without any surface adsorbed impurities. Face centered cubic phase of spinel Co₃O₄ with the mean crystalline size of 26 nm was assigned by the X-ray diffraction analysis without the formation of other phases. Porous nanosheets and cave-like morphologies were identified from the scanning electron microscopy (SEM) images. Highly agglomerated more or less spherical particles with well separated lattice fringes, representing the oriented growth of nanocrystals, were noticed on the transmission electron microscopy photographs. Surface area analysis revealed that the spinel has high surface area of about 25 m² g^?1 with monomodal mesoporosity. The average pore size distribution was found to be about 15.8 nm. The as-prepared spinel photocatalyst showed a mild photocatalytic activity in the degradation of methylene blue (2.5 mg L^?1) under UV light irradiation with air as the oxidising agent. Photocatalytic activity of the as-prepared reusable Co₃O₄ was found to be higher than that of the commercial spinel powder.     

O-Aryloxime ether analogues as novel and efficient ligands for palladium-catalyzed Suzuki–Miyaura coupling in water

O-Aryloxime ether analogues L1–L3 were studied as ligands in palladium-catalyzed Suzuki–Miyaura cross-coupling reaction of aryl bromides and aryl boronic acids in water at room temperature. Reaction conditions for the cross-coupling were optimized using PdCl₂ and Pd(OAc)₂ under aerobic condition. From the three electronically diverse O-aryloxime ether ligands studied herein, the use of 1-phenyl-ethanone O-(4-chloro-phenyl)-oximeL2 exhibits the best catalytic system in the presence of K₂CO₃ as the base and TBAB as the promoter.     

Micelles catalyzed one pot regio- and chemoselective synthesis of benzo[a]phenazines and naphtho[2,3-d]imidazoles ‘in H2O’

An efficient, novel, and concise one pot regio- and chemoselective synthesis of benzo[a]phenazines (4) and naphtho[2,3-d]imidazoles (8) has been accomplished in excellent yields by nucleophilic substitution reaction of 2,3-dichloro-1,4-naphthoquinone (1) with o-phenylenediamine (2) and benzamidines (7) respectively ‘in H₂O’ using base and micelles (SDS) as catalyst. Analog reaction of 2,3-dichloro-1,4-naphthoquinone (1) with 2-aminobenzenethiol (9) under identical conditions led to formation of a mixture of benzo[b]phenothiazine (10), benzo[a]phenothiazine (11), and benzo[a]-1,4-benzothiazino-3,2-phenothiazine (12) in 17%, 23%, and 57% yields, respectively.