Solvent and concentration effects on the properties of electrospun poly(ethylene terephthalate) nanofiber mats

This study describes the preparation and characterization of nanofibrous mats obtained by electrospinning poly(ethylene terephthalate) (PET) solutions in trifluoroacetic acid/dichloromethane (TFA/DCM). Special attention was paid to the effect of polymer concentration and solvent properties on the morphology, structure, and mechanical and thermal properties of the electrospun nonwovens. The results show that the spinnable concentration of PET solution in TFA/DCM solvents is above 10 wt %. Mats have nanofibrous morphology with fibers having an average diameter in the range of 200–700 nm (depending on polymer concentration and solvent composition) and an interconnected pore structure. Higher solution concentration favors the formation of uniform fibers without beads and with higher diameter. Morphology and fiber assembly changed with the solvent properties. Solvent mixtures rich in TFA, i.e., those with higher dielectric constant and lower surface tension, originated fibers with small diameter. However, due to the lower volatility, those solvent mixtures also produced more branched and crosslinking fibers, with less morphologic uniformity. Mechanical properties (Young's modulus, ultimate strength, and elongation at break) and thermal properties (glass transition, crystallization, and melting) have been studied for the PET electrospun nanomats and compared with those of the original polymer. Solvent effect on fiber crystallinity was not significant, but a complex effect was observed on the mechanical properties of the electrospun mats, as a consequence of the different structural organization of the fibers within the mat network. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 460–471, 2008     

Theory of projected probabilities on non-orthogonal states: Application to electronic populations in molecules

Often it is important to consider the expansion of a quantum state ) in terms of physically meaningful basis states. For example, molecular orbitals can be expressed as linear combinations of atomic orbitals, or vibrational states can be expressed as super positions of local or normal mode eigenstates. In such expansions, it then becomes desirable to determine how much character a quantum state has in one of these basis states. One way of accimplishing this task is to calculate the projected probability of |) on basis state |j). In this paper, we consider this general quantum mechanical problem. If the basis states are orthonormal, then the projected probability of|) on |j) is of course |<|j>|². However, if the basis states are not orthogonal, then this result is no longer valid and one must develop a more general theory to calculate these projected probabilities. An earlier paper used one-dimensional projection operators to initiate this theory and gave closed form results for the case of two non-orthogonal basis states [1]. One- and many-dimensional projection operators, together with linear algebraic techniques, are used to extend this theory to the n non-orthogonal basis state case. Explicit closed form results are given for the two- and three-state cases, and a general algorithm is developed for the case of four or more basis states. Application of the theory is made to atomic populations in three- to six-atom molecules, and comparisons are made to the related work of Mulliken.     

Mass spectra of esters of α-hydroxy and α-methoxy acids

The most abundant fragment produced by electron bombardment of esters of the type R¹R²C(OR³)CO₂R⁴ is the R¹R²C = \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm O}\limits^{{\rm + } \cdot } $\end{document}R³ ion. Methyl glycollate (R¹ = R² = R³ = H, R⁴ = Me) eliminates the HCO˙ radical by a complex rearrangement involving the methylenic hydrogen atoms. The methyl and ethyl esters of methoxyacetic acid (R¹ = R² = H, R³ = Me, R⁴ = Me or Et) eliminate formaldehyde by the McLafferty rearrangement.     

Determination of anions in landfill leachates by ion chromatography

Ion chromatography has been used to determine inorganic and organic anions within landfill leachates. Two procedures are operated on split samples which have multiple dilutions and vary in sample treatment: gradient ion-exchange chromatography for inorganic anions and isocratic ion-exclusion chromatography for organic anions. Interference between carbonate and organic acid anions using ion-exclusion chromatography is avoided by treatment with octanesulphonic acid eluent. Using ion-exchange chromatography, the presence of valerate, hexanoate and heptanoate is checked (but not quantified) for a subsample which has been treated to remove chloride; these species are then determined by ion-exclusion chromatography. Analysis of certified standards (10 mg/1 certified VFA standard; Supelco, Bellefonte, PA, USA; 20–150 mg/l inorganic anions, ICMIX1-100, Glen Spectra Reference Materials, Middlesex, UK) gives good agreement (within 5% for organic anions except formate, and within 1% for inorganic anions), with R.S.D. values for all anionic species varying from 0.44–2.23.     

Spectrophotometric methods for the determination of osmium-I Extraction and ultraviolet spectrophotometric determination of osmium tetroxide

An ultraviolet spectrophotometric method is presented for the détermination of milligram quantities of osmium in solutions of uranyl sulphate. Osmium is first oxidised to the octovalent state and the osmium tetroxide which is formed, is selectively extracted with chloroform. The ultraviolet absorption spectrum'of osmium tetroxide in chloroform has a series of absorption bands with peak absorbancies at 282, 289, 297, 304 and 312 mμ and molar absorbancy indexes of 1870, 1760,1640, 1400 and 1000, respectively. For each wavelength, the optimum concentration range for the determination of osmium was evaluated. From 0.4 to 3.3 mg of osmium can be determined with a coefficient of variation of 3%. Of the elements tested only chloride and octovalent ruthenium interfere; however, both of these interferences can be eliminated.     

Spectrophotometric methods for the determination of osmium-II Extraction and determination of osmium in situ with 1.5-diphenylcarbohydrazide

A method has been developed for the spectrophotometric determination of microgram quantities of osmium in uranyl sulphate solutions. The osmium is oxidised to osmium tetroxide, then extracted with chloroform. The extracts are added to an ethanolic solution of 1:5-diphenylcarbohydrazide. A blue-violet coloured reaction product is formed which exhibits maximum absorbancy at 560 mμ. After a period of 2 hr for colour development the molar absorbancy index is about 31,000. Beer's law is adhered to over a range of 30 to 100 μg of osmium with a coefficient of variation of about 4%. A study was made of the effects of foreign substances and only chloride and octovalent ruthenium were found to interfere. Both of these interfering ions can be eliminated.     

香豆素类化合物的一种新合成方法

香豆素类化合物是一类重要的有生物活性的天然产物,也可用作香料、阻凝剂和三线态光敏剂。用 Meldrum 酸合成该类化合物,已有一些报道。我们在研究 Meldrum 酸系列     

十二烯基丁二酸改性氧化锆色谱固定相性能研究

本文用十二烯基丁二酸（DSA）改性氧化锆得到一种新的锆基质色谱固定相。改性前后的红外光谱的差异表明，DSA以两个羧基与氧化锆结合，由于多位点结合方式提高了固定相的稳定性，因此固定相可以在碱性（pH8．5）条件下稳定使用。锆基质色谱固定相具有较强的疏水性，用于中性及碱性化合物的分离取得了满意的结果。     

龙爪芦荟和库拉索芦荟中微量锗的测定与红外光谱区别

采用吸光光度法对龙爪芦荟和库拉索芦荟中的微量锗进行了测定,并探讨了两种芦荟的红外光谱的区别。结果表明,龙爪芦荟中含锗量在26.1～28.6μg·g-1,回收率为91.6%～97 5%。库拉索芦荟中含锗量在16.8～20.0μg·g-1,回收率为87.1%～94.5%。两种芦荟的FT IR光谱图在2100cm-1处有明显差异,由此可区别两种芦荟。     

Dissociation and ionization effects in atomic absorption spectrochemical analysis

Use of a nitrous oxide-acetylene flame in atomic absorption spectrophotometry reduces or eliminates certain chemical interferences that have been observed in cooler flames. However, ionization increases with temperature, and is significant for some elements in the nitrous oxide-acetylene flame. Ionization can be reduced by adding an easily ionized metal (e.g. alkali metal) to the solution. Elements likely to be determined using the nitrous oxide-acetylene flame which will be significantly ionized are: Al, Ba, Ti, V, Zr, Hf, Nb, Sc, Y, the lanthanides and the actinides. The ionization of an element in the nitrous oxide-acetylene flame can be readily calculated by taking absorption readings, provided that relatively sensitive atom and ion resonance lines are available. This technique possibly could be used to establish ionization potentials or partition functions of those lanthanide elements that are not now well known.