Determination of Pu,Am, U and Cs in large soil samples in the vicinity of the USDOE Waste Isolation Pilot Plant

The determination of actinides in environmental soil and sediment samples are very important for environmental monitoring. A rapid actinide separation method has been developed and implemented that allows measurement of U, Pu and Am isotopes in large soil samples (10–15 g) with high chemical yields and effective removal of matrix interferences. The radiochemical procedures involve the total dissolution of soil samples, separation on anion-exchange resin, and separation and purification by extraction chromatography, e.g., UTEVA, TEVA, and TRU with measurements of radionuclides by alpha-spectrometry. The validation of the method is performed through the analysis of reference materials or by participating in laboratory intercomparison programs.     

Extraction studies of uranium into a third-phase of thorium nitrate employing tributyl phosphate and <Emphasis Type="Italic">N,N</Emphasis>-dihexyl octanamide as extractants in different diluents

Extraction behavior of 1 × 10⁻²–0.1 M U(VI) from aqueous phases containing 0.86 M Th(IV) at 4 M HNO₃ in 1.1 M tributyl phosphate (TBP) and 1.1 M N,N-dihexyl octanamide (DHOA) solutions in different diluents viz. n-dodecane, 10% 1-octanol + n-dodecane, and decahydronaphthalene (decalin) was studied. Third-phase formation was observed in both the extractants using n-dodecane as diluent. There was a gradual decrease in Th(IV) concentration in the third-phase (heavy organic phase, HOP) with increased aqueous U(VI) concentration [0.71 M (no U(VI))–0.61 M (0.1 M U(VI)) for TBP; 0.27 M (no U(VI))–0.22 M (0.1 M U(VI)) for DHOA]. The HOP volume in case of DHOA was ~2.2 times of that of TBP. Uranium concentration in HOP increased with its initial concentration in the aqueous phase [from 1.8 × 10⁻² M (0.01 M U(VI))–0.162 M (0.1 M U(VI)) for TBP; from 1.4 × 10⁻² M (0.01 M U(VI))–0.14 M (0.1 M U(VI)) for DHOA] suggesting that Th(IV) was being replaced by U(VI). An empirical correlation was developed for predicting the concentrations of uranium and thorium in HOP for both the extractants. No third-phase appeared during the extraction of uranium and thorium from the aqueous phases employing 10% 1-octanol + n-dodecane, or decalin as diluents, and therefore, were better choices as diluent for alleviating the third-phase formation during the reprocessing of spent thorium based fuels, and for the recovery of thorium from high-level waste solutions.     

Microproteomic analysis of 10,000 laser captured microdissected breast tumor cells using short-range sodium dodecyl sulfate-polyacrylamide gel electrophoresis and porous layer open tubular liquid chromatography tandem mass spectrometry

Precise proteomic profiling of limited levels of disease tissue represents an extremely challenging task. Here, we present an effective and reproducible microproteomic workflow for sample sizes of only 10,000 cells that integrates selective sample procurement via laser capture microdissection (LCM), sample clean-up and protein level fractionation using short-range SDS-PAGE, followed by ultrasensitive LC-MS/MS analysis using a 10 μm i.d. porous layer open tubular (PLOT) column. With 10,000 LCM captured mouse hepatocytes for method development and performance assessment, only 10% of the in-gel digest, equivalent to ～1000 cells, was needed per LC-MS/MS analysis. The optimized workflow was applied to the differential proteomic analysis of 10,000 LCM collected primary and metastatic breast cancer cells from the same patient. More than 1100 proteins were identified from each injection with >1700 proteins identified from three LCM samples of 10,000 cells from the same patient (1123 with at least two unique peptides). Label free quantitation (spectral counting) was performed to identify differential protein expression between the primary and metastatic cell populations. Informatics analysis of the resulting data indicated that vesicular transport and extracellular remodeling processes were significantly altered between the two cell types. The ability to extract meaningful biological information from limited, but highly informative cell populations demonstrates the significant benefits of the described microproteomic workflow.     

Bounded mean oscillation and bandlimited interpolation in the presence of noise

We study some problems related to the effect of bounded, additive sample noise in the bandlimited interpolation given by the Whittaker-Shannon-Kotelnikov (WSK) sampling formula. We establish a generalized form of the WSK series that allows us to consider the bandlimited interpolation of any bounded sequence at the zeros of a sine-type function. The main result of the paper is that if the samples in this series consist of independent, uniformly distributed random variables, then the resulting bandlimited interpolation almost surely has a bounded global average. In this context, we also explore the related notion of a bandlimited function with bounded mean oscillation. We prove some properties of such functions, and in particular, we show that they are either bounded or have unbounded samples at any positive sampling rate. We also discuss a few concrete examples of functions that demonstrate these properties.     

Detection of maximum loadability limits and weak buses using Chaotic PSO considering security constraints

In the current research chaotic search is used with the optimization technique for solving non-linear complicated power system problems because Chaos can overcome the local optima problem of optimization technique. Power system problem, more specifically voltage stability, is one of the practical examples of non-linear, complex, convex problems. Smart grid, restructured energy system and socio-economic development fetch various uncertain events in power systems and the level of uncertainty increases to a great extent day by day. In this context, analysis of voltage stability is essential. The efficient method to assess the voltage stability is maximum loadability limit (MLL). MLL problem is formulated as a maximization problem considering practical security constraints (SCs). Detection of weak buses is also important for the analysis of power system stability. Both MLL and weak buses are identified by PSO methods and FACTS devices can be applied to the detected weak buses for the improvement of stability. Three particle swarm optimization (PSO) techniques namely General PSO (GPSO), Adaptive PSO (APSO) and Chaotic PSO (CPSO) are presented for the comparative study with obtaining MLL and weak buses under different SCs. In APSO method, PSO-parameters are made adaptive with the problem and chaos is incorporated in CPSO method to obtain reliable convergence and better performances. All three methods are applied on standard IEEE 14 bus, 30 bus, 57 bus and 118 bus test systems to show their comparative computing effectiveness and optimization efficiencies.     

Multiple proton ionizable calixarene derivatives with different ring sizes and complexation ability as efficient ionophores for complexation and solvent extraction of trivalent indium

The solvent extraction behavior of multiple proton ionizable p-tert-butylcalix[4]arene and [6]arene carboxylic acid derivatives towards indium has been investigated along with an acyclic monomeric analogue from weakly acidic media into chloroform. The extraction mechanism is ion exchange and carboxylic acid groups are adequate ligating sites for extraction. The cyclic structure of calixarene ligands to accommodate the potential guest species and the cooperativity effect of multifunctional groups significantly affect the complexation behavior and calixarene derivatives are found to be excellent extractants over the monomeric analogue. The composition of the extracted complex depends on the solution pH and attempts to determine the composition of the extracted complex for the extraction of indium have been stymied by complications arising from the formation of polynuclear species of indium and bridged polymeric species of calixarene carboxylic acid derivatives. One mole of calix[4]arene derivative extracts 2.5 moles of indium whereas the calix[6]arene derivative tends to extract 4.0 moles of indium. The loaded indium is back extracted with 1 mol dm(-3) hydrochloric acid solution. Though quantitative back extraction of indium was achieved from the fully loaded calix[6]arene derivative, it was only achieved up to 85% in the case of the calix[4]arene derivative.     

A homometallic tricapped cubane cluster: [(Cp*Mo)4B4H4(μ4-BH)3] (Cp* = η5-C5Me5)

The reaction of [Cp*MoCl(4)] with an excess of LiBH(4), followed by thermolysis with tellurium powder in toluene, afforded a tricapped cubane cluster, [(Cp*Mo)(4)B(4)H(4)(μ(4)-BH)(3)] (1), which represents an unprecedented metal-rich metallaborane cluster with a cubane core containing 58 cluster valence electrons (cve) and three metal-metal bonds.     

Using the 19F NMR chemical shift anisotropy tensor to differentiate between the zigzag and chiral forms of fluorinated single-walled carbon nanotubes

The structural characterization of different kinds of zigzag and chiral single-walled carbon nanotubes (SWNTs) has been investigated theoretically using (19)F NMR spectroscopy. The chemical shift anisotropy (CSA) tensor is computed at different levels of theory for the (19)F nuclei in different forms of functionalized fluorinated carbon nanotubes (CNT). A set of fluorine CSA parameters comprising the span, skew, and isotropic chemical shift is computed for each form of the fluoronanotubes and multidimensional CSA parameter correlation maps are constructed. We show that these correlations are able to clearly distinguish between the chiral and zigzag forms of fluorinated carbon nanotubes (F-SWNTs). Implications for solid-state and liquid-state NMR experiments are discussed.     

Solution structure of copper-seamed C-alkylpyrogallol[4]arene nanocapsules with varying chain lengths

The stability of copper-seamed C-alkylpyrogallol[4]arene hexamers with varying chain lengths in solution has been studied using small-angle neutron scattering (SANS). The progression in diameter of spherical capsules with increasing alkyl chain lengths of copper-seamed hexamers in solution suggests both robustness as well as a close correlation between the solid phase and solution phase structures.