Synthesis and characterization of K2NiF4-type phases Ln0.5Sr1.5Mn0.5Fe0.5O4 (Ln = La, Nd, Gd, and Dy)

A systematic investigation of layered perovskite oxides with general formula Ln_0.5Sr_1.5Mn_0.5Fe_0.5O₄ (Ln?=?La, Nd, Gd, and Dy) has been undertaken mainly to understand their structural, magnetic, as well as electrical behavior. The materials were prepared by the ceramic method. X-ray data have been analyzed by using program Checkcell and the variations of various parameters are explained. It has been concluded that not only A-site cation radius, <r _A>, but also the size variance factor (σ ²) influence electrical and magnetic properties. A systematic study of electrical resistivity of all the four materials was undertaken as a function of temperature to understand the conduction mechanism. On analyzing the electrical resistivity data, it has been concluded that variable range hopping model is found to fit well. The magnetic studies suggest that the phases are antiferromagnetic and this behavior could arise from Mn⁴⁺–O–Mn⁴⁺, and Fe³⁺–O–Fe³⁺ superexchange interaction.     

Spatially Homogeneous Bianchi Type-I Universes with Variable G and Λ

In this paper, we have studied the cosmological models of Bianchi type-I universes in a different basic form filled with bulk viscous fluid, in the presence of time-dependent gravitational as well as cosmological constants. A set of new exact cosmological solutions have been obtained in both full and truncated causal theories. These solutions are suitable for describing the evolution of the universe in its early stages. The physical and dynamical consequences have been discussed in detail.     

Comparative Study of the Signal-to-Noise Ratio and Gain in Photorefractive Materials

We calculate the dependence of the signal-to-noise ratio and gain on the angle α between the pump and signal beams and the beam ratio β in Cu-doped potassium-sodium-strontium-barium niobate (Cu:KNSBN) crystal and compare them with the experimental results available in the literature. We find good qualitative agreement between the calculated and experimental results. Also we study variations of SNR and gain with α and β in BaTiO₃ crystal. Experimental data for this crystal are not available.     

Bianchi type-V model with a perfect fluid and A-term

A self-consistent system of gravitational field with a binary mixture of perfect fluid and dark energy given by a cosmological constant has been considered in Bianchi Type-V universe. The perfect fluid is chosen to be obeying either the equation of state p=γρ with γ ε |0,1| or a van der Waals equation of state. The role of A-term in the evolution of the Bianchi Type-V universe has been studied.     

Working group report: Flavor physics and model building

This is the report of flavor physics and model building working group at WHEPP-9. While activites in flavor physics have been mainly focused on B-physics, those in model building have been primarily devoted to neutrino physics. We present summary of working group discussions carried out during the workshop in the above fields, and also briefly review the progress made in some projects subsequently.     

On the stability of the output characteristics of a grazing incidence grating dye laser transversely pumped by a copper vapor laser

The output characteristics of a high repetition rate pulsed dye laser has both short-term fluctuations and long-term drift. In high power high repetition rate lasers flow induced variations dominate over those due to other factors. In this paper it is shown by dye laser measurements that bandwidth fluctuations can be traced to the effective changes of the resonator dispersion due to fluctuations in the penetration depth of the pump beam in the dye medium. Short-term wavelength fluctuations can be traced to instantaneous deflection of the dye laser axis by the refractive index changes due to absorption of the pump beam. The fluctuations in both the bandwidth and the wavelength decreases with increasing flow rates within a laminar region. A copper vapor laser operating at 5.6 kHz repetition rate pumped the Rhodamine 6G dye laser used. The wavelength fluctuation of ±0.0035, 0.0030, 0.0004 nm and the bandwidth fluctuation of ±710, 132, 45 MHz over approx. 60 minutes were observed at 1.2, 3.7, 5.5 lpm flow rates respectively.     

Rotational structures in the 125Cs nucleus

The collective band structures of the ¹²⁵Cs nucleus have been investigated by in-beam γ-ray spectroscopic techniques following the ¹¹⁰Pd ( ¹⁹F, 4n) reaction at 75MeV. The previously known level scheme, with rotational bands built on πg_7/2, πg_9/2 and πh_11/2 orbitals, has been extended and evolves into bands involving rotationally aligned ν(h_11/2)² and π(h_11/2)² quasiparticles. A strongly coupled band has been reassigned a high-K πh_11/2 ⊗ νg_7/2 ⊗ νh_11/2 three-quasiparticle configuration and a new side band likely to be its chiral partner has been identified. Configurations assigned to various bands are discussed in the framework of Principal/Tilted Axis Cranking (PAC/TAC) model calculations.     

Investigation of helium implantation induced blistering in InP

 Four-inch InP wafers were implanted with 100 keV helium ions with a dose of 5×10¹⁶ cm⁻² and subsequently annealed in air in the temperature range of 225-400°C in order to determine the blistering kinetics of these wafers. An Arrhenius plot of the blistering time as a function of reciprocal temperature revealed two different activation energies for the formation of surface blisters in InP. The activation energy was found to be 0.30 eV in the higher temperature regime of 300-400 °C and 0.74 eV in the lower temperature regime of 225-300 °C. The implantation induced damage was analyzed by cross-sectional transmission electron microscopy, which revealed a band of defects extending from 400-700 nm from the surface of InP. The damage band was found to be decorated with a large number of nanovoids having diameters between 2 and 5 nm. These nanovoids served as precursors for the formation of microcracks inside InP upon annealing, which led to the formation of surface blisters.     

Use of Cu dopant and it's doping effects on polyaniline conducting system in water and tetrahydrofuran

The structural modification and properties of polymeric materials are of utmost importance in deciding their applications. In the present study, the synthesis of polyaniline (PANI) has been carried out via chemical oxidation in acidic medium by potassium-dichromate and the yield of synthesized polyaniline was found to be 75-80%. The copper per chlorate tetrabenzonitrile salt (CuClO₄·4BN) used for chemical doping in synthesized polyaniline is stable in organic solvent like acetonitrile (AN) and benzonitrile (BN). The effect of Cu⁺¹ oxidation state (dopant) in polyaniline has been characterized by FTIR. Electrical and dielectric measurements show the decrease in the intensity of the Cu⁺¹ salt signal and the appearance of a radical signal due to the formation of oxidative coupled in polymeric species. Electrical and dielectric properties of doped polyaniline samples show significant changes due to the effect of dopant (CuClO₄·4BN). It is observed that the conductivity is contributing both by formation of ionic complex and particularly dominated by electronic due to the mobility of charge carriers along the polyaniline chain.