Studies on CdS nanoparticles dispersed in silica matrix prepared by sol-gel technique

SiO₂/CdS-nanoparticle composite films (SiO₂:CdS=85:15, 80:20, 75:25 and 70:30) were prepared by the sol-gel route. The films were characterized by studying microstructural (XRD and TEM) and optical (transmittance and photoluminescence) properties. Band gaps of these films annealed at different temperatures (373-473 K) for different times (10-120 min) indicated that the signature of nanocrystallinity is retained throughout the range of our experimental conditions. A thermal diffusion process controlled growth in the crystallite size with increasing annealing time and temperature. The average radii of the nanoparticles varied as the cube root of the annealing time but showed exponential dependence on the inverse of annealing temperature. Photoluminescence (PL) studies of the composite films indicated excitonic transitions. Theoretical analysis of the line shapes of the PL peaks recorded at 300 K and 80 K could be accounted for by the combined effects of size distribution and phonon broadening. It was observed that the deformation potential (E _d) effectively controlled the line shapes of the PL measurements. Received 24 May 2002 Published online 27 January 2003 RID="a" ID="a"e-mail: msakp@mahendra.iacs.res.in     

Observation of bulk like magnetic ordering below the blocking temperature in nanosized zinc ferrite

We investigated the magnetic behavior of nanosized zinc ferrite with the help of vibrating sample magnetometry and in-field Mössbauer spectroscopy. The nanoparticles of zinc ferrite with crystallite size ranging from 10 to 62 nm were synthesized by a nitrate method. The structure and phase were determined with the help of X-ray diffraction. Attributes of cation inversion were found with the calculated values of lattice parameter. The saturation magnetization decreases with the increase in crystallite size at room temperature, while these values are almost the same at 10 K for all the samples except the one with crystallite size of 10 nm. The thermal magnetization measurement shows a decrease in blocking temperature with increase in particle size for these samples. The synthesized samples exhibit the presence of antiferromagnetic ordering below the blocking temperature as investigated by in-field Mössbauer spectroscopy.     

Stress in polycrystalline GaN films prepared by r.f sputtering

Undoped, Be-doped and Si-doped polycrystalline GaN films were deposited by R.F. sputtering onto fused silica substrates. The films were deposited at various deposition temperatures ranging from 300 K to 623 K and characterized by optical measurements while the microstructural information was obtained from SEM and XRD studies. The compositional study for the GaN film was carried out using SIMS. Residual stresses in these films were evaluated from the band tail of the absorption spectra as well as from direct measurements of hardness by commercially available depth sensing indentometer. It was observed that undoped GaN films had the highest hardness followed by that for Be-doped and Si-doped films. The values of hardness obtained form the above optical measurement tallied quite well with those obtained from direct indentation measurement.     

Estimation of the Coefficient of Multiple Determination

Assume that we have iid observations on the random vector X = (X ,...,X ) following a multivariate normal distribution N (,) where both R and (p.d.) are unknown. Let denote the multiple correlation coefficient between X and (X ,...,X ). The parameter = , called the multiple coefficient of determination, indicates the proportion of variability in X explained by its best linear fit based on (X ,..., X ). In this paper we consider the point estimation of under the ordinary squared error loss function. The usual estimators (MLE, UMVUE) have complicated risk expressions and hence it is quite difficult to get exact decision-theoretic results. We therefore follow the asymptotic decision theoretic approach (as done by Ghosh and Sinha (1981, Ann. Statist., 9, 1334-1338)) and study Second Order Admissibility of various estimators including the usual ones.     

Nuclear symmetry energy effects in finite nuclei and neutron star

Within a relativistic mean-field model with nonlinear isoscalar–isovector coupling, we explore the possibility of constraining the density dependence of nuclear symmetry energy from a systematic study of the neutron skin thickness of finite nuclei and neutron star properties. We find the present skin data supports a rather stiff symmetry energy at subsaturation densities that corresponds to a soft symmetry energy at supranormal densities. Correlation between the skin of ²⁰⁸Pb and the neutron star masses and radii with kaon condensation has been studied. We find that ²⁰⁸Pb skin estimate suggest star radii that reveals considerable model dependence. Thus precise measurements of neutron star radii in conjunction with skin thickness of heavy nuclei could provide significant constraint on the density dependence of symmetry energy.     

Lag synchronization and scaling of chaotic attractor in coupled system

We report a design of delay coupling for lag synchronization in two unidirectionally coupled chaotic oscillators. A delay term is introduced in the definition of the coupling to target any desired lag between the driver and the response. The stability of the lag synchronization is ensured by using the Hurwitz matrix stability. We are able to scale up or down the size of a driver attractor at a response system in presence of a lag. This allows compensating the attenuation of the amplitude of a signal during transmission through a delay line. The delay coupling is illustrated with numerical examples of 3D systems, the Hindmarsh-Rose neuron model, the Ro?ssler system, a Sprott system, and a 4D system. We implemented the coupling in electronic circuit to realize any desired lag synchronization in chaotic oscillators and scaling of attractors.     

Use of Uracil Thin Layer for Measuring Biologically Effective UV Dose

Abstract— Dimerization of uracil monomers in a polycrystalline state by UV radiation changes the absorption characteristics of a thin layer of the material. The change in optical density, measured by spectrophotometry in the250–400 nm range, as a function of the exposure time is evaluated in terms of the biologically effective UV dose. A statistical evaluation of a great number of uracil dosimeters irradiated with a TL01 lamp from Philips establishes the possibility of evaluating the biologically effective UV dose using a uracil dosimeter. Nonlinear regression procedures were introduced to correct the absorption spectra for contributions due to light scattering and to determine the optical density values required to calculate the UV dose expressed in H^Uunits. Comparison of cumulative daily doses and long-term monitoring measured by the uracil thin-layer dosimeter and a phage T7 dosimeter are given, which allow the determination of conversion factors between various biological dosimeters under different irradiation conditions.     

Ni(II) selective sensors based on Schiff bases membranes in poly(vinyl chloride)

The two nickel chelates of Schiff bases, 3-hydroxy-N-{2-[(3-hydroxy-N-phenylbutyrimidoyl)-amino]-phenyl}-N′-phenylbutyramidine (M₁) and bis-4-(ethyliminomethyl)naphthalene-1-ol (M₂), have been synthesized and explored as ionophores for preparing PVC-based membrane sensors selective to nickel ion. The influences of membrane compositions on the potentiometric response of the electrodes have been found to substantially improve the performance characteristics. The best performance was obtained with the electrode having a membrane composition (w/w; mg) of (M₁): PVC:NaTPB:CN in the ratio 5:150:5:150. The sensor shows a linear potential response for Ni²⁺ over a wide concentration range 1.6 × 10⁻⁷ to 1.0 × 10⁻² M with Nernstian compliance (30.0 ± 0.2 mV/decade of activity) within pH range 2.5-9.5 and a fast response time of 10 s. The sensor has been found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol, and acetonitrile and could be used for a period of 4 months. The analytical usefulness of the proposed electrode has been evaluated by its application in the determination of nickel in real samples. The practical utility of the membrane electrode has also been observed in the presence of surfactants.     

Rhodium-Catalyzed C8-Alkenylation of Isoquinolones with Maleimides

An efficient Rh(III)-catalyzed C−H alkenylation of N-protected isoquinolone with maleimides is reported. The carbonyl group of isoquinolone acts as an inherent directing group. Various N-substituents in the maleimide, including alkyl, aryl, and even H and −OH, were well tolerated under the developed reaction condition. This protocol showed broad substrate scope, good selectivity, and excellent yields. Hammett plot is also drawn to check the effect of substituents on the reaction progress.