Electrochemical sensors of heavy metals using novel polymer-modified glassy carbon electrodes

Electroanalytical determination of heavy metals using stripping voltammetry is commonly employed and has many advantages over other methods. The sensitivity of the technique is greatly improved by employing different modified electrodes. Seven novel polymer-modified glassy carbon electrodes have been developed in this investigation for the trace analysis of heavy metals such as zinc, cadmium, lead, arsenic, and copper in formulated samples of waters by square wave stripping voltammetry. Very good responses have been observed for all the metals, while all the modified electrodes employed. The poly(3,4-ethylenedioxythiophene)-modified electrode has resulted in very low limit of detection (LOD) value. Comparison is made between literature results of LOD and the results obtained in this study. An independent atomic absorption spectroscopic analysis of the industrial wastewater sample was carried out and the results compared. The suitability of the method for practical application was ascertained by applying the procedure for the wastewater from a plating industry.     

Monitoring the Reaction of the Body State to Antibiotic Treatment against Helicobacter pylori via Infrared Spectroscopy: A Case Study

The current understanding of deviations of human microbiota caused by antibiotic treatment is poor. In an attempt to improve it, a proof-of-principle spectroscopic study of the breath of one volunteer affected by a course of antibiotics for Helicobacter pylori eradication was performed. Fourier transform spectroscopy enabled searching for the absorption spectral structures sensitive to the treatment in the entire mid-infrared region. Two spectral ranges were found where the corresponding structures strongly correlated with the beginning and end of the treatment. The structures were identified as methyl ester of butyric acid and ethyl ester of pyruvic acid. Both acids generated by bacteria in the gut are involved in fundamental processes of human metabolism. Being confirmed by other studies, measurement of the methyl butyrate deviation could be a promising way for monitoring acute gastritis and anti-Helicobacter pylori antibiotic treatment.     

Raman Imaging: An Impending Approach Towards Cancer Diagnosis

In accordance with the recent studies, Raman spectroscopy is well experimented as a highly sensitive analytical and imaging technique in biomedical research, mainly for various disease diagnosis including cancer. In comparison with other imaging modalities, Raman spectroscopy facilitate numerous assistances owing to its low background signal, immense spatial resolution, high chemical specificity, multiplexing capability, excellent photo stability and non-invasive detection capability. In cancer diagnosis Raman imaging intervened as a promising investigative tool to provide molecular level information to differentiate the cancerous vs non-cancerous cells, tissues and even in body fluids. Anciently, spontaneous Raman scattering is very feeble due to its low signal intensity and long acquisition time but new advanced techniques like coherent Raman scattering (CRS) and surface enhanced Raman scattering (SERS) gradually superseded these issues. So, the present review focuses on the recent developments and applications of Raman spectroscopy-based imaging techniques for cancer diagnosis.     

Development of Biosensor for Catechol Using Electrosynthesized Poly(3‐methylthiophene) and Incorporation of LAC Simultaneously

Simultaneous electropolymerization of 3‐methylthiophene and incorporation of Laccase (LAC) was carried out in the presence of propylene carbonate as a medium by amperometric method. This enzyme modified electrode was used for the sensing of polyphenol. Catechol is taken as a model compound for the study. UV‐Vis spectral studies suggest no denaturation of LAC in presence of propylene carbonate. The SEM studies reveal the surface morphology and incorporation of LAC in P3MT with agglomerated flaky masses are observed in with and without enzyme micrographs. The cyclic voltammograms were recorded for 0.01 mM catechol on plain glassy carbon, polymer and enzyme incorporated electrodes at pH 6.0 and scan rate 50 mV s^?1. The fabricated electrochemical biosensor was used for the determination of catechol in aqueous solution by Differential Pulse Voltammetry (DPV) technique. The concentration linear range of 8×10^?8 to 1.4×10^?5 M a value of Michealis? Menten constant K_m=7.67 µmol dm^?3 and activation energy is 32.75 kJ mol^?1. It retains 83 % of the original activity after 60 days which is much higher than that of other biosensors. The developed biosensor was used to quantify catechol in the determination in real samples.     

Fully Diastereoselective Synthesis of Polysubstituted,Functionalized Piperidines and Decahydroquinolines Based on Multicomponent Reactions Catalyzed by Cerium(IV) Ammonium Nitrate

The cerium(IV) ammonium nitrate (CAN)‐catalyzed, three‐component reaction between primary amines, β‐dicarbonyl compounds, and α,β‐unsaturated aldehydes in ethanol heated to reflux, constitutes a general, one‐pot synthesis of 1,4‐dihydropyridines. Their reduction with sodium triacetoxyborohydride furnished piperidine derivatives bearing up to five substituents with full diastereoselectivity in a hitherto inaccessible stereochemical arrangement. The reaction proceeded with no significant loss of enantiomeric purity under mild reduction conditions that are compatible with several functional groups that are normally sensitive to reduction. Octahydroquinolin‐5‐one derivatives, which were prepared by a modified version of the initial multicomponent reaction, were not suitable substrates for the sodium triacetoxyborohydride mediated reduction, but they were transformed into the corresponding decahydroquinolines, including a precursor of the amphibian alkaloid pumiliotoxin C, by catalytic hydrogenation under a variety of conditions.     

para-Selective Arylation of Arenes: A Direct Route to Biaryls by Norbornene Relay Palladation

Biaryl compounds are extremely important structural motifs in natural products, biologically active components and pharmaceuticals. Selective synthesis of biaryls by distinguishing the subtle reactivity difference of distal arene C−H bonds are significantly challenging. Herein, we describe para-selective C−H arylation, which is acheived by a unique combination of a meta-directing group and norbornene as a transient mediator. Upon direct meta-C−H palladation, one-bond relay palladation occurs in presence of norbornene and subsequently para-C−H arylation is achieved for sulfonates, phosphonates and phenols bearing 2,6-disubstitution patterns. The protocol is amenable to electron-deficient aryl iodides. Multisubstituted arenes and phenols are obtained by postsynthetic modification of the products. The protocol allows the synthesis of hexa-substituted benzene by sequential selective distal C−H functionalization.     

Determination of direct orange 8 in effluent using a polypyrrole modified electrode

Electrochemical studies of direct orange 8 were carried out with a bare glassy carbon electrode (GCE) and a polypyrrole-coated GCE in aqueous acetonitrile medium using voltammetric techniques. One reversible couple around 0.3?V due to the redox reaction of the phenol group, one reduction peak around ?0.4?V due to reduction of the azo group and one oxidation peak around 1.0?V due to oxidation of the amino group were observed. Chronocoulometric studies revealed dye adsorption on the GCE. A square-wave stripping method was developed for the determination of the dye at pH 13.0, and a linear calibration equation obtained. The reproducibility in the measurement of peak currents was confirmed from the RSD value 2.8% at 0.001?mg?mL^?1 concentration. A comparison of the stripping voltammetric method with the UV-Vis spectrophotometric method was made. The determination limits are wider and the RSD value is lower in the stripping voltammetric method. The concentration of the dye present in dye effluent was determined using this method.     

Origin of charge density wave formation in insulators from a high resolution photoemission study of BaIrO3

We investigate the origin of charge density wave (CDW) formation in insulators by studying BaIrO3 using high-resolution (1.4 meV) photoemission spectroscopy. The spectra reveal the existence of localized density of states at the Fermi level, E(F), in the vicinity of room temperature. These localized states are found to vanish as the temperature is lowered, thereby, opening a soft gap at E(F), as a consequence of CDW transition. In addition, the energy dependence of the spectral density of states reveals the importance of magnetic interactions, rather than well-known Coulomb repulsion effect, in determining the electronic structure thereby implying a close relationship between ferromagnetism and CDW observed in this compound. Also, Ba core level spectra surprisingly exhibit an unusual behavior prior to CDW transition.     

Entropy-stabilized smectic C phase in a system of zigzag-shaped molecules

We report Monte Carlo simulations of a system of rigid zigzag-shaped molecules that demonstrate that simple excluded-volume interactions are sufficient to produce a fluid tilted lamellar [smectic C (SmC)] liquid crystal phase. The molecules are composed of three rigidly linked hard spherocylinders arranged in a zigzag fashion. By varying the zigzag angle we have mapped out the whole phase diagram as a function of pressure and zigzag angle Psi. For Psi between 35 degrees and 80 degrees our model simulation exhibits the SmC phase. This is the first conclusive evidence where steric interactions arising out of molecular shape alone induce the occurrence of the SmC phase for a wide range of zigzag angles. For smaller Psi, a transition from tilted crystal to crystal is observed.