Trifluoromethoxy substituted anilines: metalation as the key step for structural elaboration

Trifluoromethoxy-substituted anilines undergo hydrogen/lithium permutation ("metalation") with optional site selectivity depending on the N-protective group employed. N-tert-Butoxycarbonyl-2- and -4-(trifluoromethoxy)aniline react with tert-butyllithium at the nitrogen-adjacent 6- and 2-position affording, after electrophilic trapping, products 1-6. In contrast, deprotonation of the para isomer occurs at the oxygen-neighboring 3-position, giving rise to the acid 12, when the amino group is carrying two trimethylsilyl groups. sec-Butyllithium attacks 3-trifluoromethoxy-N-mono(trimethylsilyl)aniline at the 2-position, but 3-trifluoromethoxy-N,N-bis(trimethylsilyl)aniline at the 4-position to provide respectively the acids 10 and 11 after carboxylation. The synthesis of two new benzodiazepines illustrates (19 and 22) the preparative potential of the aniline functionalization mediated by organometallic reagents.     

Yellowing and IR-changes of spruce wood as result of UV-irradiation

The yellowing and IR-changes of spruce wood as a result of UV-irradiation were studied using two different types of xenon lamps (lambda>300 nm; I(o)=50 mW cm(-2) and lambda>280 nm; I(o)=17.5 mW cm(-2)). Changes in the IR spectra as well as the yellowing of the irradiated wood surfaces show the influence of UV light on the wood modules. The UV-irradiation (72 h; lambda>300 nm; I(o)=50 mW cm(-2)) decreased the lignin content on the surface by up to 20% of the original values. The colour difference of yellowing (deltaE) exhibited a systematic trend to higher values with increasing irradiation time. Our results show that the photoyellowing (UV-Vis detection) correlates very well with lignin degradation (IR detection). This result is in agreement with the quinone formation as the chromophoric reaction product of lignin decay. The degradation, yellowing, and oxidation kinetics differed only little using different light sources. The absorbed light intensity, which depends on wavelength, the intensity distribution of the light source and the absorption spectrum of lignin, influenced the degradation rate. Under the current experimental conditions, the absorption spectrum of lignin was the most important factor. Therefore, irradiation with lambda>280 nm is useful for rapidly monitoring the UV-degradation of wood     

Two-level structured self-adaptive surfaces with reversibly tunable properties

We report a route to fabricate two-level structured self-adaptive surfaces (SAS) of polymer materials. The first level of structure is built by a rough polymer film that consists of needlelike structures of micrometer size. The second level of structure is formed by the nanoscopic self-assembled domains of a demixed polymer brush irreversibly grafted onto the needles. By exposing the surface to solvents that are selective to one of the components of the brush, we reversibly tune the surface properties. The large-scale surface structure amplifies the response and enables us to control wettability, adhesion, and chemical composition of the surface over a wide range.     

Tris(triphenylplumbyl)plumbate: an anion with three stretched lead-lead bonds

Treatment of lead(II) bromide with phenylmagnesium bromide at low temperature furnishes yellow crystals of the ionic compound [BrMg(THF)5]+ [:Pb(PbPh3)3]- which, upon X-ray crystallographic analysis, reveals three stretched Pb-Pb bonds and Pb-Pb-Pb angles of about 93 degrees.     

Polypyrrole Grafts Synthesized via Electrochemical Polymerization

Abstract

Electrically conducting polypyrrole grafts with poly[(methyl meth-acrylate)-co-(2-(N-pyrrolyl) ethyl methacrylate)] (PMMA-co-PEMA) were synthesized by constant potential electrolysis. Cyclic Voltammetry, DSC, TGA, SEM and elemental analysis were used in order to characterize the free standing films. Conductivities of the polymers were measured by a four-probe technique.     

Influence of increasing zinc contents in brass in the early stages of corrosion investigated by in-situ TM-AFM and SIMS

In-situ tapping mode atomic force microscopy (TM-AFM), a powerful, high-resolution imaging technique for determining the structure of surfaces and ex-situ secondary ion mass spectroscopy (SIMS), a multielement, high-depth-resolution method, were used to examine the influence of increasing zinc contents in brass in the early stages of corrosion. Four different samples (pure Cu, pure Zn, Cu/Zn=90/10 wt% and Cu/Zn=70/30 wt%) were studied in order to determine their chemical behaviour under various atmospheric conditions. The in-situ TM-AFM investigations were carried out in synthetic air with 60% relative humidity (RH) and 80% RH with 250 ppb SO(2). The samples for the ex-situ SIMS experiments were weathered over a period of 60 h in 80% RH and 250 ppb SO(2). The in-situ TM-AFM investigations have shown that an increasing Zn content in brass increases the corrosion rate.     

Serendipitous synthesis of a ditwistane: a one-step access!

4-tert-Butyl-2-cyclohexen-1-one dimerizes in THF solution via its kinetic enolate, leading to di-tert-butylditwistane 8 in up to 36% yield (−78 °C → room temp., protonolysis, flash chromatography). X-ray crystallography shows that 8 incorporates one R and one S enantiomer of the starting ketone; none of the diastereomeric ditwistanes epi-8, epi’-8 or iso-8 was isolated. This means that the formation of 8 proceeds with mutual kinetic resolution and 100% induced diastereoselectivity.     

Rearrangement reactions of the transient lewis acids (CF(3))(3)B and (CF(3))(3)BCF(2): an experimental and theoretical study

Short-lived (CF(3))(3)B and (CF(3))(3)BCF(2) are generated as intermediates by thermal dissociation of (CF(3))(3)BCO and F(-) abstraction from the weak coordinating anion [B(CF(3))(4)](-), respectively. Both Lewis acids cannot be detected because of their instability with respect to rearrangement reactions at the B-C-F moiety. A cascade of 1,2-fluorine shifts to boron followed by perfluoroalkyl group migrations and also difluorocarbene transfer reactions occur. In the gas phase, (CF(3))(3)B rearranges to a mixture of linear perfluoroalkyldifluoroboranes C(n)()F(2)(n)()(+1)BF(2) (n = 2-7), while the respective reactions of (CF(3))(3)BCF(2) result in a mixture of linear (n = 2-4) and branched monoperfluoroalkyldifluoroboranes, e.g., (C(2)F(5))(CF(3))FCBF(2). For comparison, the reactions of [CF(3)BF(3)](-) and [C(2)F(5)BF(3)](-) with AsF(5) are studied, and the products in the case of [CF(3)BF(3)](-) are BF(3) and C(2)F(5)BF(2) whereas in the case of [C(2)F(5)BF(3)](-), C(2)F(5)BF(2) is the sole product. In contrast to reports in the literature, it is found that CF(3)BF(2) is too unstable at room temperature to be detected. The decomposition of (CF(3))(3)BCO in anhydrous HF leads to a mixture of the new conjugate Br?nsted-Lewis acids [H(2)F][(CF(3))(3)BF] and [H(2)F][C(2)F(5)BF(3)]. All reactions are modeled by density functional calculations. The energy barriers of the transition states are low in agreement with the experimental results that (CF(3))(3)B and (CF(3))(3)BCF(2) are short-lived intermediates. Since CF(2) complexes are key intermediates in the rearrangement reactions of (CF(3))(3)B and (CF(3))(3)BCF(2), CF(2) affinities of some perfluoroalkylfluoroboranes are presented. CF(2) affinities are compared to CO and F(-) affinities of selected boranes showing a trend in Lewis acidity, and its influence on the stability of the complexes is discussed. Fluoride ion affinities are calculated for a variety of different fluoroboranes, including perfluorocarboranes, and compared to those of the title compounds.     

Phospholipid mesophases at solid interfaces: in-situ X-ray diffraction and spin-label studies

In this work, we report on recent investigations, both on the global and on the local molecular architecture of supported phospholipid model membranes. A brief theoretical introduction explains how global structural information on supramolecular lipid ensembles can be retrieved from surface X-ray diffraction measurements as well as how spin-label electron paramagnetic resonance spectroscopy (EPR) provides complementary information on the local environment of probe molecules. The combination of especially designed X-ray cells with the technique of small- and wide-angle X-ray surface scattering makes it possible to explore various fields of lipid research and its applications. Examples for different physico-chemical conditions are presented: (i) in situ chemistry under excess of water conditions demonstrating how solid-supported lipid films sense salinity, (ii) the 3D electron density reconstruction of a vesicle-fusion intermediate under controlled humidity, and (iii) complementary temperature and pressure effects on oriented phospholipid samples. Further, special attention has been given to the influence of different film preparation techniques with respect to quality and the defect structure manifestation. To resolve the proportions and local properties of defects in a hydrated lipid-deposited surface, spin-label EPR was applied. The results from 9.6 GHz EPR as well as from 1.2 GHz EPR suggest the alignment to be in the range between 30% and 80%. In addition, slow time-dependent EPR measurements point to nano-structural rearrangements due to water flow and reduction of alignment quality.