Synthese von 12-Cyano-15-hexadecanolid durch Ringerweiterung von 1-(3′-Hydroxybutyl)-2-oxocyclododecan-1-carbonitril

Synthesis of 12-Cyano-15-hexadecanolide by Ring Enlargement of 1-(3′-Hydroxybutyl)-2-oxocyclododecane-1-carbonitrile In the presence of Bu₄NF, 2-oxocyclododecane-1-carbonitrile ( 1 ) reacted with acrylaldehyde to form the corresponding aldehyde 2 which was methylated, e.g. with CH₃ Ti[OCH(CH₃)₂]₃. The resulting 1-(3′-hydroxybutyl)-2-oxocyclododecane-1-carbonitrile ( 5 ) was converted to 12-cyano-15-hexadecanolide ( 6 ) in nearly quantitative yield under the influence of Bu₄NF.     

Synthese von 15-Hydroxy[9]metacyclophan

Synthesis of 15-Hydroxy[9]metacyclophane 3-(1-Nitro-2-oxocyclododecyl)propanal ( 1 ) was converted to 15-hydroxy[9]metacyclophane ( 3 ) on two different routes. In the first case the internal aldol reaction product of 1 was treated with K₂CO₃/THF to give 3 in 29 % yield with regard to cyclododecanone. Alternatively, the aldehyde 1 reacted with a primary amine to form e.g. 4 which gave 3 in the presence of CH₃I/K₂CO₃ in 48 % yield.     

Optimization of capillary zone electrophoresis parameters for selenium speciation

The behaviour of four biologically relevant selenium compounds (Se(VI), Se(IV), selenomethionine and selenocystine) in capillary zone electrophoresis (CZE) was investigated. Parameters which affect the separation, detection and sample introduction were investigated to improve the sensitivity of the analysis. Short-term repeatability was evaluated and detection limits were found to be in the g·l^–1 range.     

Characterization of individual atmospheric particles by element mapping in electron probe microanalysis

In this paper procedures for the characterization of individual aerosol particles by element mapping in the electron microprobe are presented. The number, size and qualitative chemical composition of particles is derived from a combination of secondary or backscattered electron images and element distribution maps. Accuracy of the size distribution and reliability of the qualitative analysis procedure were checked with silicate samples. In order to obtain a semi-quantitative estimate of the chemical composition of individual particles the count rates taken from element distribution maps are corrected for matrix and geometric effects using particle ZAF procedures.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Femtosecond Spectroscopic Studies on the Red Light-Absorbing Form of Oat Phytochrome and 2,3-Dihydrobiliverdin

Abstract— The excited state behavior of the red light-absorbing form of phytochrome (Pr) was studied on the femtosecond time scale. After excitation of Pr with 75 fs laser pulses at 616 nm the kinetics of the transient absorption changes was recorded at selected wavelengths probing mainly the bleaching of the Pr ground-state absorption and the stimulated emission. The kinetic data obtained indicate the population of an excited state with a 3 ps lifetime immediately after excitation. This state precedes the formation of another excited state with a 32 ps lifetime. The decay of the latter state is followed by the appearance of a first product state that is assumed to represent lunii-R. In addition, 2,3-dihydrobiliverdin, which is considered to be an adequate model of the Pr chro-mophore, was included in the femtosecond studies. The absorption difference spectra recorded at various delay times show an immediate bleaching of the ground-state absorption. Simultaneously with bleaching a broad transient absorption appears between 410 and 525 nm. The data analysis yields similar kinetic components as they were observed in the decay of Pr. It is suggested from this finding that within the first tens of picoseconds after excitation the excited-state properties of Pr are mainly determined by the properties of the chromophore itself.     

A Structural Diversity of Molecular Alkaline-Earth-Metal Polyphosphides: From Supramolecular Wheel to Zintl Ion

A series of molecular group 2 polyphosphides has been synthesized by using air-stable [Cp*Fe(η⁵-P₅)] (Cp*=C₅Me₅) or white phosphorus as polyphosphorus precursors. Different types of group 2 reagents such as organo-magnesium, mono-valent magnesium, and molecular calcium hydride complexes have been investigated to activate these polyphosphorus sources. The organo-magnesium complex [(^DippBDI−Mg(CH₃))₂] (^DippBDI={[2,6-ⁱPr₂C₆H₃NCMe]₂CH}⁻) reacts with [Cp*Fe(η⁵-P₅)] to give an unprecedented Mg/Fe-supramolecular wheel. Kinetically controlled activation of [Cp*Fe(η⁵-P₅)] by different mono-valent magnesium complexes allowed the isolation of Mg-coordinated formally mono- and di-reduced products of [Cp*Fe(η⁵-P₅)]. To obtain the first examples of molecular calcium-polyphosphides, a molecular calcium hydride complex was used to reduce the aromatic cyclo-P₅ ring of [Cp*Fe(η⁵-P₅)]. The Ca-Fe-polyphosphide is also characterized by quantum chemical calculations and compared with the corresponding Mg complex. Moreover, a calcium coordinated Zintl ion (P₇)³⁻ was obtained by molecular calcium hydride mediated P₄ reduction.     

Conversion of E4 (E4=P4, As4, AsP3) by Ni(0) and Ni(I) Synthons – A Comparative Study

The reactivity of white phosphorus and yellow arsenic towards two different nickel nacnac complexes is investigated. The nickel complexes [(L¹Ni)₂tol] ( 1 , L¹=[{N(C₆H₃ⁱPr₂-2,6)C(Me)}₂CH]⁻) and [K₂][(L¹Ni)₂(μ,η^{1 : 1}-N₂)] ( 6 ) were reacted with P₄, As₄ and the interpnictogen compound AsP₃, respectively, yielding the homobimetallic complexes [(L¹Ni)₂(μ-η²,κ¹:η²,κ¹-E₄)] (E=P ( 2 a ), As ( 2 b ), AsP₃ ( 2 c )), [(L¹Ni)₂(μ,η^{3 : 3}-E₃)] (E=P ( 3 a ), As ( 3 b )) and [K@18-c-6(thf)₂][L¹Ni(η^{1 : 1}-E₄)] (E=P ( 7 a ), As ( 7 b )), respectively. Heating of 2 a , 2 b or 2 c also leads to the formation of 3 a or 3 b . Furthermore, the reactivity of these compounds towards reduction agents was investigated, leading to [K₂][(L¹Ni)₂(μ,η^{2 : 2}-P₄)] ( 4 ) and [K@18-c-6(thf)₃][(L¹Ni)₂(μ,η^{3 : 3}-E₃)] (E=P ( 5 a ), As ( 5 b )), respectively. Compound 4 shows an unusual planarization of the initial Ni₂P₄-prism. All products were comprehensively characterized by crystallographic and spectroscopic methods.     

Enantiopure Calcium Iminophosphonamide Complexes: Synthesis,Photoluminescence, and Catalysis

The synthesis of calcium complexes ligated by three different chiral iminophosphonamide ligands, L- H ( L =[Ph₂P{N(R)CH(CH₃)Ph}₂]), L′ -H ( L′ =[Ph₂P{NDipp}{N(R)CH(CH₃)Ph}]), (Dipp=2,6-ⁱPr₂C₆H₃), and L′′ -H ( L′′ =[Ph₂P{N(R)CH(CH₃)naph}₂]), (naph=naphthyl) is presented. The resulting structures [ L ₂Ca], [ L′ ₂Ca], and [ L′′ ₂Ca] represent the first examples of enantiopure homoleptic calcium complexes based on this type of ligands. The calcium complexes show blue–green photoluminescence (PL) in the solid state, which is especially bright at low temperatures. Whereas the emission of [ L′′ ₂Ca] is assigned to the fluorescence of naphthyl groups, the PL of [ L ₂Ca] and [ L′ ₂Ca] is contributed by long-lived phosphorescence and thermally activated delayed fluorescence (TADF), with a strong variation of the PL lifetimes over the temperature range of 5–295 K. Furthermore, an excellent catalytic activity was found for these complexes in hydroboration of ketones at room temperature, although no enantioselectivity was achieved.