The ring-opening reaction of chromenes: a photochemical mode-dependent transformation

The efficiency of the photochemical ring-opening of chromenes (or benzopyrans) depends on the vibronic transition selected by the chosen excitation wavelength. In the present work, ab initio CASPT2//CASSCF calculations are used to determine the excited-state ring-opening reaction coordinate for 2H-chromene (C) and 2,2-diethyl-2H-chromene (DEC) and provide an explanation for such an unusual mode-dependent behavior. It is shown that excited-state relaxation and decay occur via a multimodal and barrierless (or nearly barrierless) reaction coordinate. In particular, the relaxation out of the Franck-Condon involves a combination of in-plane skeletal stretching and out-of-plane modes, while the second part of the reaction coordinate is dominated exclusively by a different out-of-plane mode. Population of this last mode is shown to be preparatory with respect to both C-O bond breaking and decay via an S(1)/S(0) conical intersection. The observed mode-dependent ring-opening efficiency is explained by showing that the vibrational mode corresponding to the most efficient vibronic transition has the largest projection onto the out-of-plane mode of the reaction coordinate. To support the computationally derived mechanism, we provide experimental evidence that the photochemical ring-opening reaction of 2,2-dimethyl-7,8-benzo(2H)chromene, that similarly to DEC exhibits a mode-dependent photoreaction, has a low ( approximately 1 kcal mol(-1)) activation energy barrier.     

Water concentration profiles in membranes measured by ESEEM of spin-labeled lipids

Electron spin-echo envelope modulation (ESEEM) spectroscopy of phospholipids spin-labeled systematically down the sn-2 chain was used to detect the penetration of water (D2O) into bilayer membranes of dipalmitoyl phosphatidylcholine with and without 50 mol % cholesterol. Three-pulse stimulated echoes allow the resolution of two superimposed 2H-ESEEM spectral components of different widths, for spin labels located in the upper part of the lipid chains. Quantum chemical calculations (DFT) and ESEEM simulations assign the broad spectral component to one or two D2O molecules that are directly hydrogen bonded to the N-O group of the spin label. Classical ESEEM simulations establish that the narrow spectral component arises from nonbonded water (D2O) molecules that are free in the hydrocarbon chain region of the bilayer membrane. The amplitudes of the broad 2H-ESEEM spectral component correlate directly with those of the narrow component for spin labels at different positions down the lipid chain, reflecting the local H-bonding equilibria. The D2O-ESEEM amplitudes decrease with position down the chain toward the bilayer center, displaying a sigmoidal dependence on position that is characteristic of transmembrane polarity profiles established by other less direct spin-labeling methods. The midpoint of the sigmoidal profile is shifted toward the membrane center for membranes without cholesterol, relative to those with cholesterol, and the D2O-ESEEM amplitude in the outer regions of the chain is greater in the presence of cholesterol than in its absence. For both membrane types, the D2O amplitude is almost vanishingly small at the bilayer center. The water-penetration profiles reverse correlate with the lipid-chain packing density, as reflected by 1H-ESEEM intensities from protons of the membrane matrix. An analysis of the H-bonding equilibria provides essential information on the binding of water molecules to H-bond acceptors within the hydrophobic interior of membranes. For membranes containing cholesterol, approximately 40% of the nitroxides in the region adjacent to the lipid headgroups are H bonded to water, of which ca. 15% are doubly H bonded. Corresponding H-bonded populations in membranes without cholesterol are ca. 20%, of which ca. 6% are doubly bonded.     

Models for biological trinuclear copper clusters. Characterization and enantioselective catalytic oxidation of catechols by the copper(II) complexes of a chiral ligand derived from (S)-(-)-1,1'-binaphthyl-2,2'-diamine

The dinuclear and trinuclear Cu(II) complexes of an octadentate ligand derived from (S)-1,1'-binaphthyl-2,2'-diamine have been prepared and characterized by UV/Vis, CD, EPR and NMR spectroscopy. The ligand contains two tridentate aminobis(benzimidazole) donor arms connected to a central bidentate diaminobinaphthyl linker, which hosts the chiral unit. In the dinuclear Cu complex the ligation occurs essentially within the tridentate arms of the ligand. The two Cu centers are EPR nonequivalent and noninteracting. The EPR data suggests that one of the Cu ions additionally interacts with one of the tertiary aminonaphthyl donors. In the trinuclear complex the two aminonaphthyl donors bind the third Cu ion. The EPR spectrum of this complex shows the signal for a mononuclear Cu(II) center bound to a tridentate arm, while the remaining two Cu(II) centers are coupled through hydroxo groups. The CD spectrum shows that in the free ligand a severe reduction of the dihedral angle between the naphthyl groups from the strain free range occurs. This conformation is stabilized by ring stacking interactions with the benzimidazole groups. On complex formation this interaction is removed because the benzimidazole groups are involved in metal binding. In the dinuclear Cu complex the conformation of the binaphthyl chromophore probably approaches the strain free range, while in the trinuclear Cu complex a marked flattening of the dihedral angle between the two naphthyl rings occurs. Both complexes are active catalysts in the oxidation of L-/D-Dopa derivatives to quinones. High enantioselectivity is observed in the oxidation of L-/D-Dopa methyl ester catalyzed by the dinuclear Cu complex, which exhibits strong preference for the d enantiomer. The enantioselectivity is largely lost for the trinuclear Cu complex.     

Further insights on the high-low spin interconversion in nickel(II) tetramine complexes. Solvent and temperature effects

The spin interconversion equilibrium involving the [Ni(II)(cyclam)]2+ complex has been investigated in a variety of polar solvents, at varying temperatures. The greater the donor tendencies of the solvent, the higher the endothermicity of the high-to-low-spin conversion. In particular, a positive linear relationship exists between DeltaHdegrees and Gutmann's Donor Number (DN). In the same way, higher donor tendencies of the solvent favour the occurrence of the Ni(II)-to-Ni(III) oxidation process and negative linear relationship has been found between the E1/2(Ni(III)/Ni(II)) and DN. General behaviour is related to the intensity of the metal-solvent axial bonds in the octahedrally elongated cyclam complexes (of both Ni(II) and Ni(III)).     

Imino acids and collagen triple helix stability: characterization of collagen-like polypeptides containing Hyp-Hyp-Gly sequence repeats

The analysis of factors contributing to the stability of proteins is a subject of intense debate. Particularly challenging is the study of structural proteins, since their function is their structure. Among these is collagen, the key structural component of bones, skin, cartilage, tendons, and other connecting tissues. It is well established that the collagen triple helix is characterized by the presence of hydroxyproline, whose content modulates triple helix thermal stability according to the requirement of the host organism. Because of the complexity and the fibrous nature of collagen, data on the stability and structure of this protein have been mainly obtained by the use of collagen-like polypeptides. On the basis of CD characterization of collagen-like polypeptides we here show that the presence of Hyp at the X position of repeating triplets Hyp-Hyp-Gly stabilizes the triple helix significantly. This extra-stabilization has been ascribed, by using molecular modeling, to the formation of a hydrogen bond between Hyp residues belonging to the X and the Y positions of adjacent chains. This communication also provides a comprehensive interpretation of the ensemble of available data on polypeptides containing proline derivatives.     

Polystyryl-supported TBD as an efficient and reusable catalyst under solvent-free conditions

Polystyryl supported-TBD (PSTBD) is an efficient and reusable heterogeneous basic catalyst under solvent-free conditions for a variety of organic transformations such as 1,2-epoxide ring-opening, aldol-type condensation and Michael addition.     

Nitrite increases the enantioselectivity of sulfoxidation catalyzed by myoglobin derivatives in the presence of hydrogen peroxide

The effect of nitrite in the sulfoxidation of organic sulfides catalyzed by myoglobin (Mb) in the presence of hydrogen peroxide has been investigated. A general improvement in enantioselectivity was found for the reaction catalyzed by horse heart metMb and a series of sperm whale metMb derivatives including the wild type protein, the active site mutants T67K Mb, T67R Mb, T67R/S92D Mb, and the T67K Mb derivative reconstituted with the modified prosthetic group protohemin-l- histidine methyl ester.     

Analysis of egg-based model wall paintings by use of an innovative combined dot-ELISA and UPLC-based approach

The chemical analysis of egg-based wall paintings—the mezzo fresco technique—is an interesting topic in the characterisation of organic binders. A revised procedure for a dot-enzyme-linked immunosorbent assay (dot-ELISA) able to detect protein components of egg-based wall paintings is reported. In the new dot-ELISA procedure we succeeded in maximizing the staining colour by adjusting the temperature during the staining reaction. Quantification of the colour intensity by visible reflectance spectroscopy resulted in a straight line plot of protein concentration against reflectance in the wavelength range 380–780 nm. The modified dot-ELISA procedure is proposed as a semi-quantitative analytical method for characterisation of protein binders in egg-based paintings. To evaluate its performance, the method was first applied to standard samples (ovalbumin, whole egg, egg white), then to model specimens, and finally to real samples (Giotto’s wall paintings). Moreover, amino acid analysis performed by innovative ultra-performance liquid chromatography was applied both to standards and to model samples and the results were compared with those from the dot-ELISA tests. In particular, after protein hydrolysis (24 h, 114 °C, 6 mol L^?1 HCl) of the samples, amino acid derivatization by use of 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate enabled reproducible analysis of amino acids. This UPLC amino acid analysis was rapid and reproducible and was applied for the first time to egg-based paintings. Because the painting technique involved the use of egg-based tempera on fresh lime-based mortar, the study enabled investigation of the effect of the alkaline environment on egg-protein detection by both methods.

The relationship between nanosilica dispersion degree and the tensile properties of polyurethane nanocomposites

The tensile properties and structure of silica-based polyurethane (PU) nanocomposites were parametrically studied as a function of silica type and weight concentration, polyol OH number, and mixing methods. The variation of the silica functionalization groups (from silanols to silazanes) had a relevant effect on dispersion. An elevated interparticle distance of the silica agglomerates improved substantially the tensile strength (from 44.3 to 82.8 MPa) and strain to failure (from 3.0 to 7.95) while maintaining elastic modulus (from 2.08 to 2.31 GPa) with respect to the neat PU matrix. Polyol’s with different OH numbers have shown to dramatically modify the silica dispersion degree by the modification of the stability of the colloidal dispersion. An increase of its value deteriorated dispersion and the tensile properties of the nanocomposites. The effect of three dispersion methods (ultrasonic dispersion, high shear mixing, and tip sonication) has shown to have a relative effect on the reduction of agglomerate size and the interparticle distance. High power sonication methods were more effective in reducing agglomerate size in contrast to shear methods. Classical theories of colloidal dispersion (Derjaguin, Landau, Verwey, and Overbeek) have been able to explain the correlation between the silica aggregation state and the final tensile properties of the nanocomposite.     

Nature of urea-fluoride interaction: incipient and definitive proton transfer

1,3-bis(4-nitrophenyl)urea (1) interacts through hydrogen bonding with a variety of oxoanions in an MeCN solution to give bright yellow 1:1 complexes, whose stability decreases with the decreasing basicity of the anion (CH3COO- > C6H5COO- > H2PO4- > NO2- > HSO4- > NO3-). The [Bu4N][1.CH3COO] complex salt has been isolated as a crystalline solid and its molecular structure determined, showing the formation of a discrete adduct held together by two N-H...O hydrogen bonds of moderate strength. On the other hand, the F- ion first establishes a hydrogen-bonding interaction with 1 to give the most stable 1:1 complex, and then on addition of a second equivalent, induces urea deprotonation, due to the formation of HF2-. The orange-red deprotonated urea solution uptakes carbon dioxide from air to give the tetrabutylammonium salt of the hydrogencarbonate H-bond complex, [Bu4N][1.HCO3], whose crystal and molecular structures have been determined.