Interfacial and micellar properties of binary mixtures of surfactant and phospholipid in an aqueous medium

Mixed micelles formed by zwitterionic surfactant dimethyldodecylammniopropane sulfonate and short-chain phospholipid 1,2-diheptanoyl-sn-glycero-3-phosphocholine in different proportions in an aqueous medium have been studied physicochemically at an air/water interface and in the bulk by using interfacial tension and pyrene fluorescence intensity measurements, respectively. The critical micellar concentration and free energies of micellization and of interfacial adsorption have been determined. The interfacial study reveals that a mixed monolayer is formed at the air/water interface by the adsorption of surfactant and phospholipid monomers. This has been confirmed by evaluating the interfacial parameters; the maximum surface excess, the minimum area per molecule of a surface-active compound, and the Gibbs surface excess related to surface pressure. The nonideality of mixing, expressed in the terms of the regular solution interaction parameter, #, has negative values over the whole mole fraction range. The negative # values indicate the mutual synergism between the surfactant and phospholipid monomers. The equilibrium distribution of components between micelle and monomer phases was evaluated using a theoretical treatment based on excess thermodynamics quantities evaluated by Motomura's formulation.     

Characterization of a new qQq-FTICR mass spectrometer for post-translational modification analysis and top-down tandem mass spectrometry of whole proteins

The use of a new electrospray qQq Fourier transform ion cyclotron mass spectrometer (qQq-FTICR MS) instrument for biologic applications is described. This qQq-FTICR mass spectrometer was designed for the study of post-translationally modified proteins and for top-down analysis of biologically relevant protein samples. The utility of the instrument for the analysis of phosphorylation, a common and important post-translational modification, was investigated. Phosphorylation was chosen as an example because it is ubiquitous and challenging to analyze. In addition, the use of the instrument for top-down sequencing of proteins was explored since this instrument offers particular advantages to this approach. Top-down sequencing was performed on different proteins, including commercially available proteins and biologically derived samples such as the human E2 ubiquitin conjugating enzyme, UbCH10. A good sequence tag was obtained for the human UbCH10, allowing the unambiguous identification of the protein. The instrument was built with a commercially produced front end: a focusing rf-only quadrupole (Q0), followed by a resolving quadrupole (Q1), and a LINAC quadrupole collision cell (Q2), in combination with an FTICR mass analyzer. It has utility in the analysis of samples found in substoichiometric concentrations, as ions can be isolated in the mass resolving Q1 and accumulated in Q2 before analysis in the ICR cell. The speed and efficacy of the Q2 cooling and fragmentation was demonstrated on an LCMS-compatible time scale, and detection limits for phosphopeptides in the 10 amol/muL range (pM) were demonstrated. The instrument was designed to make several fragmentation methods available, including nozzle-skimmer fragmentation, Q2 collisionally activated dissociation (Q2 CAD), multipole storage assisted dissociation (MSAD), electron capture dissociation (ECD), infrared multiphoton induced dissociation (IRMPD), and sustained off resonance irradiation (SORI) CAD, thus allowing a variety of MS(n) experiments. A particularly useful aspect of the system was the use of Q1 to isolate ions from complex mixtures with narrow windows of isolation less than 1 m/z. These features enable top-down protein analysis experiments as well structural characterization of minor components of complex mixtures.     

Malachite green as a reagent for detection and spectrophotometric determination of chromium(VI)

A sensitive and inexpensive method of spectrophotometric determination of chromium(VI), based on the absorbance of its complex with malachite green and acetic acid at pH 2.5 is reported. The complex shows a molar absorptivity of 8 x 10(4) l.mole(-1) cm(-1) at 560 nm, using malachite green and acetic acid as reference solution. The effect of time, temperature, pH and reagent concentration is studied and optimum operating conditions are established. Beer's law is applicable in the concentration range 2.0-22.8 mug/ml chromium(VI). The resin beads act as a catalyst and as little as 1.6 mug of chromium(VI) is detected in the resin phase as compared to 4.1 mug in the solution phase. The standard deviation in the determinations is +/-0.40 mug/ml for a 10.35 mug/ml solution.     

Copper(II)acetate complexes with piperazine, 1-methylpiperazine, 1,4-dimethylpiperazine and their monohydrochlorides

New copper(II) acetate complexes with the saturated diheterocyclic bases (L-L): piperazine, 1-methylpiperazine, and 1,4-dimethylpiperazine and their monohydrochlorides, have been prepared and characterised by physico-chemical and spectroscopic methods. They are magnetically dilute and antiferromagnetic, with stoichiometries of the type Cu(OAc)₂(B)_n(B=L-L or L-LHCl and n=2, 1 or 0.5).     

Favorable interactions of amine- and ester-terminated PAMAM with cationic surfactants: photophysical and transport studies

Conductivity (kappa), turbidity (tau), and fluorescence (I1/I3) studies of hexadecyltrimethylammonium bromide (HTAB), hexadecylpyridinium bromide (HPyBr), and hexadecylpyridinium chloride (HPyCl) in aqueous poly(amido amine) (PAMAM) dendrimers of generations 0 to 2.5 G have been carried out. The complexation of surfactant monomers with the PAMAM surface groups is demonstrated by the critical aggregation concentration (cac), which is two to three orders of magnitude less than the micellization of cationic surfactants in aqueous PAMAM and denoted by critical micelle concentration (cmc*). In the presence of aqueous amine-terminated PAMAM, the cmc* value for each surfactant was much lower than the cmc in pure water, while they remain close to each other in the presence of aqueous ester-terminated PAMAM for each surfactant. The fluorescence studies demonstrated that both amine- and ester-terminated PAMAM interact with the cationic surfactants, though the mode of interaction varied due to the different nature of surface groups.     

Sulfonation of arylamines: Part 12. Kinetics of thermal decomposition of dimethylanilinium sulfates

Three dimethylanilinium sulfates (DMAS) have been prepared and characterised by elemental and spectral studies. Thermal decomposition of these salts has been studied by TG and simultaneous TG-DTG technique and kinetic parameters were evaluated from both dynamic and isothermal TG data using mechanism based kinetic equations. The thermal decomposition pathways have also been suggested and it has been found that DMAS salts give dimethyl aminobenzenesulfonic acids (DMABSA) via solid state reaction. The primary step in the thermal decomposition involves proton transfer followed by sulfonation.This revised version was published online in November 2005 with corrections to the Cover Date.     

Photoexcitation of the potassium octacyanotungstate(IV)· 5–nitro-1,10–phenanthroline system: kinetics and mechanism of the reaction

The kinetics of thermal reactions of the photochemically-generated species [W(CN)7OH]4− and [W(CN)6–(CNH)(H2O)]2− with 5–nitro-1,10–phenanthroline (nitrophen) in basic and acidic media, respectively, were studied in buffer solutions at pH 4.2–10.6 and ionic strength 7.5×10−2kg−1 at 20°C. The quantum yield for the formation of the photoproduct was calculated and found to depend upon pH and the ligand and [W(CN)8]4− concentrations. The rate constants and quantum yields were less compared with 1,10–phenanthroline due to the electron-withdrawing inductive effect of the nitro group in nitrophen, which makes the latter a weaker ligand. The pseudo-first-order rate constant and quantum yield values in acidic media are higher than in basic media and the mechanisms of the photochemical substitution are different in the two media. This revised version was published online in June 2006 with corrections to the Cover Date.     

Depression in the cloud point of Tween in the presence of glycol additives and triblock polymers

Cloud point (C_P) measurements of Tween 20 and Tween 80 were carried out in the presence of various glycol oligomers and triblock polymers (TBP). The cloud points of both Tween 20 and 80 decrease in the presence of both types of additives. Among the glycol oligomeric additives, ethylene glycol monobutyl ether was found to reduce the C_P maximum. An increase in the repeating units of polymeric glycol additives leads to a decrease in C_P. Reduction in the C_P in the presence of TBP depends upon the increase in hydrophobic/hydrophilic ratio among the polypropylene to polyethylene units.     

Identification of Druggable Targets for Acinetobacter baumannii Via Subtractive Genomics and Plausible Inhibitors for MurA and MurB

Emergence of the multidrug-resistant pathogens has rendered the current therapies ineffective thereby, resulting in the need for new drugs and drug targets. The accumulating protein sequence data has initiated a drift from classical drug discovery protocols to structure-based drug designing. In the present study, in silico subtractive genomics approach was implemented to find a set of potential drug targets present in an opportunist bacterial pathogen, Acinetobacter baumannii (A. baumannii). Out of the 43 targets identified, further studies for protein model building and lead-inhibitor identification were carried out on two cell-essential targets, MurA and MurB enzymes (of A. baumannii designated as MurA_Ab and MurB_Ab) involved in the peptidoglycan biosynthesis pathway of bacteria. The homology model built for each of them was further refined and validated using various available programs like PROCHECK, Errat, ProSA energy plots, etc. Compounds showing activity against MurA and MurB enzymes of other organisms were collected from the literature and were docked into the active site of MurA_Ab and MurB_Ab enzymes. Three inhibitors namely, T6361, carbidopa, and aesculin, showed maximum Glide score, hydrogen bonding interactions with the key amino acid residues of both the enzymes and acceptable ADME properties. Furthermore, molecular dynamics simulation studies on MurA_Ab–T6361 and MurB_Ab–T6361 complexes suggested that the ligand has a high binding affinity with both the enzymes and the hydrogen bonding with the key residues were stable in the dynamic condition also. Therefore, these ligands have been propsed as dual inhibitors and promising lead compounds for the drug design against MurA_Ab and MurB_Ab enzymes.