AB INITIO MOLECULAR ORBITAL STUDY OF 1,2-DITHIANE AND 1,2,4,5-TETRATHIANE

Ab initio calculations at HF/6-31+G? level of theory for geometry optimization, and MP2/6-31+G?//HF/6-31+G? and B3LYP/6-31+G?//HF/6-31+G? levels for a single-point total energy calculation, are reported for the chair and twist conformations of 1,2-dithiane (1), 3,3,6,6-tetramethyl-1,2-dithiane (2), 1,2,4,5-tetrathiane (3), and 3,3,6,6-tetramethyl-1,2,4,5-tetrathiane (4). The C₂ symmetric chair conformations of 1 and 2 are calculated to be 21.9 and 8.6 kJ mol^?1 more stable than the corresponding twist forms. The calculated energy barriers for chair-to-twist processes in 1 and 2 are 56.3 and 72.8 kJ mol^?1, respectively. The C_2h symmetric chair conformation of 3 is 10.7 kJ mol^?1 more stable than the twist form. Interconversion of these forms takes place via a C₂ symmetric transition state, which is 67.5 kJ mol^?1 less stable than 3-Chair. The D₂ symmetric twist-boat conformation of 4 is calculated to be 4.0 kJ mol^?1 more stable than the C_2h symmetric chair form. The calculated strain energy for twist to chair process is 61.1 kJ mol^?1.     

Synthesis, spectral and electrochemical studies of Cu(II) and Ni(II) complexes with new N2O2 ligands: a new precursor capable of depositing copper nanoparticles using thermal reduction

Cu(II) and Ni(II) complexes of the general type [M(N2O2)] are described. The N2O2 ligands used are [N,N'-bis(2-hydroxy-6-methoxybenzylidene)propane-1,3-diamine] (HOMeSalpn) and [N,N'-bis(2-hydroxy-6-methoxybenzylidene)propane-1,2-diamine (HOMeSalpr). These complexes have been characterized by IR, UV-vis, CV, TG-DTA and 1H NMR spectroscopy. The electrochemical behavior of these complexes at a glassy carbon electrode in acetonitrile solution indicates that the first reduction process corresponding to Cu(II)-Cu(I) and Ni(II)-Ni(I) is electrochemically irreversible. The new copper complexes have been applied for the preparation of copper nanoparticles using non-ionic surfactant (Triton X-100) by thermal reduction. The copper nanoparticles with average size of 48nm were formed by thermal reduction of [N,N'-bis(2-hydroxy-6-methoxybenzylidene)propane-1,3-diamine]copper(II) in the presence of triphenylphosphine thus releasing the reduced copper and affording the high-purity copper nanoparticles.     

New 5-bromo-2-hydroxybenzaldehyde S-ethylisothiosemicarbazone and its mixed-ligand Cu(II) complex with imidazole: synthesis, characterization and DFT calculation

A new Schiff base ligand of 5-bromo-2-hydroxybenzaldehyde S-ethyl-isothiosemicarbazone (H₂L) was synthesized and its mixed-ligand Cu(II) complex was also prepared by reaction of Cu(NO₃)₂·3H₂O with H₂L and imidazole. Their structures were fully characterized by elemental analysis, FT-IR, molar conductivity and UV-Vis methods. The analytical data suggest that the metal, H₂L and imidazole ratios in the Schiff base complex are 1:1:1. Single crystal diffraction was also used to better understand the molecular structure of the Cu(II) complex. The results of physico-chemical analyses of the Schiff base complex reveal the coordination geometry around the central atom is square planar. The H₂L ligand (NNO donor) is coordinated to the metal center as a tridentate bionegatively agent. Another position of the square planar geometry is occupied by the imidazole ligand. Furthermore, computational studies of the new complex were performed by carrying out DFT calculations. Geometry optimization and natural band analysis of the complex is discussed in further detail.      

Determination of captopril in patient human urine using ferrocenemonocarboxylic acid modified carbon nanotubes paste electrode

<正>In this work,we describe a new strategy for the electrochemical determination of captopril(CA) using ferrocenemonocarboxylic acid as a mediator and multiwall carbon nanotubes as sensors in aqueous solution at pH 7.0.The diffusion coefficient(D),and the kinetic parameters such as electron transfer coefficient(α).and heterogeneous rate constant(k_h),for CA were also determined using electrochemical approaches.Under the optimized conditions,the electrocatalytic oxidation peak current of captopril showed two linear dynamic ranges with a detection limit of 0.3×10~(-6) mol L~(-1) captopril.The linear calibration range was 0.8×10~(-6) to 65×10~(-6) mol L~(-1) using cyclic voltammetry.Finally,this modified electrode was also examined as a selective,simple and precise new electrochemical sensor for the determination of captopril in real samples such as drug and patient human urine.     

Electronic effects on atom tunneling: conformational isomerization of monomeric para-substituted benzoic acid derivatives

We present the first generation and spectroscopic identification of the higher-lying E conformer of the simplest aromatic carboxylic acid, benzoic acid (1a), as its O-deuterated isotopologue (E)-d(1)-1a using matrix-isolation techniques; the parent (E)-1a could not be observed because of fast H-tunneling to the more stable conformer (Z)-1a. Even deuterated (E)-d(1)-1a converts quickly back to (Z)-d(1)-1a through D-tunneling with a half-life (τ) of ～12 min in Ar at 11 K. Tunneling computations using an Eckart barrier in conjunction with a CCSD(T)/cc-pVTZ//MP2/cc-pVDZ + ZPVE intrinsic reaction path revealed that τ of (E)-1a is only ～10(-5) min, in marked contrast to those of simple aliphatic acids, which are in the range of minutes. The electronic substituent effects on D-tunneling in para-substituted benzoic acid derivatives (p-X-PhCOOD, d(1)-1) were systematically studied in Ar matrices at 11 K to derive the first Hammett relationships for atom tunneling. σ-Electron donors (X = alkyl) increase the half-life of d(1)-1, while σ-acceptor/π-donor groups (X = OD, NH(2), halogen) and to an even greater extent a σ-/π-acceptor group (X = NO(2)) decrease τ. The latter finding is in line with the smaller E-to-Z reaction barriers and narrower reaction widths for the isomerization. Tunneling substituent constants (σ(t)) for this conformational isomerization were derived experimentally and computationally.     

Dielectric Constants of Water,Methanol, Ethanol,Butanol and Acetone: Measurement and Computational Study

The dielectric constants (relative permittivities) of water, methanol, ethanol, butanol and acetone were measured at 91.3 kPa and (283.15 and 293.15) K and are reported here. The dielectric constants were determined by using a new setup based on a low-pass filter. The obtained dielectric constant values are compared with those reported in the literature, and are consistent with those reported in the literature. The obtained dielectric constant data were also compared with those calculated by the Kirkwood model. The comparisons indicated that Kirkwood model can be successfully used for calculation of dielectric constants of the pure fluids.     

Influence of Chemical Heterogeneity and Nanoscale Roughness on the DLVO Energy Interaction by Spherical Coordinates

In this work, the influence of chemical heterogeneity on the stability of nanocolloidal systems is surveyed with a new method. Zone of influence as a very important parameter for chemical patch surveying is modeled for sphere and flat surface. Surface chemical heterogeneity with specified properties, size, and position are created by spherical coordinate integration method. Rippled sphere model is used to create roughness and the flat surface is created by changing two sphere radius ratio. Using the spherical coordinate system for modeling of surface roughness and chemical heterogeneity is very accurate and fast. Results show that the patches could destabilize the colloidal system at very small sizes. Surface roughness reduces the effect of chemical patches for destabilizing the colloidal system, and with increasing the size of roughness the total DLVO energy interaction increases.     

Reaction parameters influence on the catalytic performance of copper-silica aerogel in the methanol steam reforming

Steam reforming of methanol was carried out on the copper-silica aerogel catalyst.The effects of reaction temperature,feed rate,water to methanol molar ratio and carrier gas flowrate on the H_2 production rate and CO selectivity were investigated.M ethanol conversion was increased considerably in the range of about 240-300,after which it increased at a slightly lower rate.The used feed flowrate,steam to methanol molar ratio and carrier gas flowwere 1.2-9.0 m L/h,1.2-5.0 and 20-80 m L/min,respectively.Reducing the feed flowrate increased the H_2 production rate.It was found that an increase in the water to methanol ratio and decreasing the carrier gas flowrate slightly increases the H2production rate.Increasing the water to methanol ratio causes the lowest temperature in which CO formation was observed to rise,so that for the ratio of 5.0 no CO formation was detected in temperatures lower than 375℃.In all conditions,by approaching the complete conversion,increasing the main product concentration,increasing the temperature and contact time,and decreasing the steam to methanol ratio,the CO selectivity was increased.These results suggested that CO was formed as a secondary product through reverse water-gas shift reaction and did not participate in the methanol steam reforming reaction mechanism.     

Template Syntheses Involving the Carbon Acid Nitroethane. Synthesis and Characterization of Copper(II) Complexes of a 16-membered Tetraaza Macrocycle

New square-planar Cu(II) complexes of 3,11-dimethyl-3,11-dinitro-1,5,9,13-tetraazacyclohexadecane and 1,11-diamino-6-methyl-6-nitro-4,8-diazaundecane cations have been prepared from the one-pot template condensation of [Cu(pn)₂]²⁺ (pn=1,3-diaminopropane) in MeOH with CH₂O and EtNO₂ in the presence of a noncoordinating base. Reduction of the nitro group in the (3,11-dimethyl-3,11-dinitro-1,5,9,13-tetraazacyclohexadecane)copper(II) cation, may be achieved by Zn/acid reduction. The Cu(II) complex of the reduced form of the ligand, namely (3,11-diammonio-3,11-dimethyl-1,5,9,13-tetraazacyclohexadecane)copper(II), has also characterized. With the macrocyclic ligand, rac and meso isomers have been identified, the meso form being the major product. Elemental analyses, i.r. and u.v.–vis. spectroscopy, f.a.b. mass spectra conductometric, magnetic measurements and cyclic voltammetry have been used to characterize the complexes.