The reaction between nitrous oxide and carbon monoxide over magnesium oxide

The title reaction was carried out with the help of the transient response method over MgO. It was concluded that no catalyst reduction occurred over this catalyst and the reaction proceeded through the reaction between adsorbed nitrous oxide and adsorbed carbon monoxide without participation of MgO oxygen.

---

MgO. , - MgO.

     

Profiling and comprehensive expression analysis of ABC transporter solute-binding proteins of Bacillus subtilis membrane based on a proteomic approach

We analyzed ABC transporter solute-binding proteins (SBPs) of the Bacillus subtilis membrane using a proteomic approach. We prepared a washed cell membrane fraction that was insoluble in 134 mM nondetergent sulfobetaine and then extracted proteins using mixtures of detergents in a stepwise manner. The membrane proteins were resolved by three two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) or two one-dimensional (1-D) PAGE procedures, electroblotted, and digested in the presence of 5% or 80% acetonitrile. Thereafter, matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF MS) identified 637 proteins corresponding to 15.9% of the total cellular proteins. We predicted that among these, 256 were membrane proteins, 101 were lipoproteins or secretory proteins and 280 were soluble proteins containing peripheral proteins that function in both the cytoplasm and the cell membrane such as SecA and FtsY. Among the 637 proteins, we identified 30 SBPs among 38 importers predicted by a bioinformatic search of the genome. We confirmed expression of the genes for the 30 SBPs using DNA microarray analysis. We compared the 2-D gel separation profiles of submembrane fractions solubilized by 1% n-dodecyl-beta-D-maltoside from cells cultured on Luria Bertani (LB), S7, and S7 medium without glutamate as well as DNA microarray data on LB and S7. The results suggested that YcdH, YtmK and YurO are binding proteins for Mn(++), glutamate and glucose, respectively, and that YqiX and YxeM are binding proteins for amino acids (tryptophan in S7 medium).     

NMR Spectroscopic Observation of a Metal‐Free Acetylide Anion

A metal‐free acetylide was observed by using NMR spectroscopy. Metal‐free acetylides are closely related to reactive intermediates (carbanions) in solution; therefore, they have been regarded as unobservable species. However, we generated this highly reactive and unstable species through the deprotonation of phenylacetylene by using the strong nonmetallic phosphazene base tBu‐P4. In the presence of tBu‐P4, the J coupling between the ethynyl carbon and hydrogen nuclei (¹J_C,H) of phenylacetylene disappeared; this indicates the deprotonation of the alkyne terminal. Furthermore, a large low‐field shift (approximately 90 ppm) of the alkyne carbon resonance was observed. We concluded that we have observed a metal‐free carbanion with a formal charge on an sp‐hybridized carbon atom for the first time.     

Determination of protein spots separated by two-dimensional polyacrylamide gel electrophoresis

A simple method for quantitating proteins in the spots on two-dimensional polyacrylamide gel electropherograms is described. The system consists in three steps: (1) O'Farrell's two-dimensional gel electrophoresis of the proteins to be analysed; (2) staining of the gels with Coomassie brilliant blue; and (3) determination of the area and integrated density of the stained spots by the Joyce Loebl Magiscan-1 image analysis system. The method can be used for the determination of proteins in the range 0.5-100 micrograms/cm2; the amount of protein involved in most spots detected by the staining method actually falls within this range. As the minimum spot diameter that can easily be handled by the method is about 2 mm, as much as 30 ng of protein in such a spot can be determined. The method can also be applied to autoradiograms.     

On the electronic character of localized singlet 2,2-dimethoxycyclopentane-1,3-diyl diradicals: substituent effects on the lifetime

Photodenitrogenation of the diazenes 4 affords exclusively the housanes 5 through intramolecular cyclization of the spectrally detected and characterized singlet diradicals 3. The lifetime of singlet diradical 3, determined by transient absorption measurements, depends on the Y and Z substituents at the para position of the phenyl ring and has the following order: Y, Z = OMe, OMe > OMe, CN > CN, CN > OMe, H > Cl, Cl approximately CN, H approximately Me, Me > H, H. This unprecedented substituent effect reveals stabilization of the singlet 2,2-dimethoxycyclopentane-1,3-diyl diradicals 3 through radical, zwitterionic, pi-bonding, and hyperconjugative structures.     

Homoleptic cyclometalated iridium complexes with highly efficient red phosphorescence and application to organic light-emitting diode

Phosphorescence studies of a series of facial homoleptic cyclometalated iridium(III) complexes have been carried out. The complexes studied have the general structure Ir(III)(C-N)(3), where (C-N) is a monoanionic cyclometalating ligand: 2-(5-methylthiophen-2-yl)pyridinato, 2-(thiophen-2-yl)-5-trifluoromethylpyridinato, 2,5-di(thiophen-2-yl)pyridinato, 2,5-di(5-methylthiophen-2-yl)pyridinato, 2-(benzo[b]thiophen-2-yl)pyridinato, 2-(9,9-dimethyl-9H-fluoren-2-yl)pyridinato, 1-phenylisoquinolinato, 1-(thiophen-2-yl)isoquinolinato, or 1-(9,9-dimethyl-9H-fluoren-2-yl)isoquinolinato. Luminescence properties of all the complexes at 298 K in toluene are as follows: quantum yields of phosphorescence Phi(p) = 0.08-0.29, emission peaks lambda(max) = 558-652 nm, and emission lifetimes tau = 0.74-4.7 micros. Bathochromic shifts of the Ir(thpy)(3) family [the complexes with 2-(thiophen-2-yl)pyridine derivatives] are observed by introducing appropriate substituents, e.g., methyl, trifluoromethyl, or thiophen-2-yl. However, Phi(p) of the red emissive complexes (lambda(max) > 600 nm) becomes small, caused by a significant decrease of the radiative rate constant, k(r). In contrast, the complexes with the 1-arylisoquinoline ligands are found to have marked red shifts of lambda(max) and very high Phi(p) (0.19-0.26). These complexes are found to possess dominantly (3)MLCT (metal-to-ligand charge transfer) excited states and have k(r) values approximately 1 order of magnitude larger than those of the Ir(thpy)(3) family. An organic light-emitting diode (OLED) device that uses Ir(1-phenylisoquinolinato)(3) as a phosphorescent dopant produces very high efficiency (external quantum efficiency eta(ex) = 10.3% and power efficiency 8.0 lm/W at 100 cd/m(2)) and pure-red emission with 1931 CIE (Commission Internationale de L'Eclairage) chromaticity coordinates (x = 0.68, y = 0.32).     

Conversion of antennapedia homeodomain to zinc finger-like domain: Zn(II)-induced change in protein conformation and DNA binding

From the standpoint of protein dynamics and metalloprotein design, it is interesting to create an artificial protein which induces structural change and regulates its function by metal-ion binding. We engineered a novel protein, "Antennafinger (Ant-F)", whose structure and function can be controlled with Zn(II), by introducing the consensus sequence of a Cys(2)His(2)-type zinc finger protein into a non-metalloprotein scaffold, an Antennapedia homeodomain mutant (Ant-wt), selected using a motif-searching system. The circular dichroism studies demonstrate that Ant-F has secondary structures similar to Ant-wt and also changes its conformation due to Zn(II)-binding. The optical absorption spectra of the Co(II) complexes of Ant-F and its derivative proteins suggest that the geometry of the metal center of holo-Ant-F is tetrahedral and that the mutated Cys(2)His(2) residues are involved in the complex formation. In addition, the gel mobility shift assay reveals that the DNA binding activity of Ant-F can be regulated through Zn(II)-induced structural alteration. These results provide valuable information about the dynamic properties of proteins and a novel concept for metalloprotein design.     

A new chiral Rh(II) catalyst for enantioselective [2 + 1]-cycloaddition. mechanistic implications and applications

A novel chiral Rh(II) catalyst (1) is introduced for the [2 + 1]-cycloaddition of ethyl diazoacetate to terminal acetylenes and olefins with high enantioselectivity. The catalyst 1 consists of one acetate bridging group and three mono-N-triflyldiphenylimidazoline-2-one bidentate ligands (DPTI) spanning the Rh(II)-Rh(II) metallic center in a structure that was determined by single-crystal X-ray diffraction analysis. A rational mechanism is advanced that provides a straightforward explanation for the enantioselectivity and absolute stereochemical course of the [2 + 1]-cycloaddition reactions. A key element in this explanation is the cleavage of one of the Rh-O bonds of the bridging acetate group in the intermediate Rh-carbene complex to form a new pentacoordinate Rh carbene complex (formally 1.5 valent Rh) that can undergo [2 + 2]-cycloaddition with the C-C pi-bond of the acetylenic or olefinic substrate. Reductive elimination of the resulting adduct affords the cyclopropene or cyclopropane product. The C2-symmetry of the two DPTI ligands orthogonal to the bridging acetate also contributes to the high observed enantioselectivity and mechanistic clarity. The catalyst 1, which functions effectively at 0.5 mol %, can be recovered efficiently for reuse. Its ready availability, robustness, and effectiveness suggest it as a useful addition to the list of practical chiral Rh(II) catalysts for synthesis.     

Air-Segmented Continuous-Flow Analysis for Molybdenum in Various Geochemical Samples

 An air-segmented continuous-flow method has been developed for the determination of molybdenum at ultra trace levels using the catalytic effect of molybdate during the oxidation of L-ascorbic acid by hydrogen peroxide. Incorporation of an on-line ion exchange column improved the tolerance limit for various ions. The detection limits with and without the column were 64 pmol L⁻¹ and 17 pmol L⁻¹, and the reproducibilities at 10 nmol L⁻¹ were 2.1% and 0.2%, respectively. The proposed method was applied to the determination of molybdenum in seawater and lake water as well as in rock and sediment samples. This method has the highest sensitivity among the available literature to our knowledge, and is also convenient for routine analysis of molybdenum in various natural samples. Author for correspondence. E-mail: masahito.sugiyama@ sojin0206.mbox.media.kyoto-u.ac.jp Received October 23, 2002; accepted January 28, 2003 Published online May 19, 2003