Fabrication,Microstructure, and Properties of Nanoporous Pd,Ni, and Their Alloys by Dealloying

Nanoporous metals can be fabricated by dealloying, which is one of the reactions that occur during the corrosion of alloys. Nanoporous gold has been widely investigated for several decades, and it has recently been found that other metals, such as platinum, palladium, nickel, and copper, can form nanoporous structures through the dealloying of binary alloys. This article mainly shows fabrication and properties of nanoporous palladium and nickel after introduction of nanoporous metals by referring to nanoporous gold as an example. It is necessary to select binary alloys with suitable elements, in which the dissolution of the less noble element and the aggregation of the nobler element at the solid/electrolyte interface are simultaneously allowed. Postprocessing by thermal or acid treatment alters the nanoporous structure. Various properties of nanoporous metals (including mechanical, catalytic, piezoelectric, hydrogenation, and magnetic ones) are different from those of bulk and nanocrystalline materials and nanoparticles because of their specific three-dimensional network structures consisting of nanosized pores and ligaments. Hydrogenation and magnetic properties are reviewed in terms of lattice strain at curved surfaces. These new metallic nanomaterials are now being investigated from the viewpoint of functional applications, and provide much room for study in various fields.     

Analysis of visual perception of light emitting diode brightness in dense fog with various droplet sizes

Road signs must provide a conspicuous signal to a wide variety of drivers over a broad range of environmental and geometric conditions. Recently, there are an increasing number of applications in which light emitting diodes (LEDs) are used as the light source, including critical transportation signaling. In the presence of fog, the resulting visual signal is disturbed due to light scattering by airborne water droplets. By measuring LED brightness with human spectral sensitivity in various densities and various droplet sizes (10, 30, 50, and 100 μm), it is understood that the particle size distribution (fog droplet size) and density of fog does affect visibility in fog. The colored LEDs that contain a yellow component had high brightness evaluation, blue component had low brightness evaluation in all densities and different droplet sizes. The result in this paper can contribute to air and land traffic safety and the prevention of accidents.     

Comparison of accuracy of intravoxel incoherent motion and apparent diffusion coefficient techniques for predicting malignancy of head and neck tumors using half-Fourier single-shot turbo spin-echo diffusion-weighted imaging

Purpose

To evaluate the use of the intravoxel incoherent motion (IVIM) technique in half-Fourier single-shot turbo spin-echo (HASTE) diffusion-weighted imaging (DWI), and to compare its accuracy to that of apparent diffusion coefficient (ADC) to predict malignancy in head and neck tumors.

Patients and methods

HASTE DW images of 33 patients with head and neck tumors (10 benign and 23 malignant) were evaluated. Using the IVIM technique, parameters (D, true diffusion coefficient; f, perfusion fraction; D*, pseudodiffusion coefficient) were calculated for each tumor. ADC values were measured over a range of b values from 0 to 1000 s/mm². IVIM parameters and ADC values in benign and malignant tumors were compared using Student's t test, receiver operating characteristics (ROC) analysis, and multivariate logistic regression modeling.

Results

Mean ADC and D values of malignant tumors were significantly lower than those of benign tumors (P < 0.05). Mean D* values of malignant tumors were significantly higher than those of benign tumors (P < 0.05). There was no significant difference in mean f values between malignant and benign tumors (P > 0.05). The technique of combining D and D* was the best for predicting malignancy; accuracy for this model was higher than that for ADC.

Conclusions

The IVIM technique may be applied in HASTE DWI as a diagnostic tool to predict malignancy in head and neck masses. The use of D and D* in combination increases the diagnostic accuracy in comparison with ADC.     

The Effect of Intramolecular Hydrogen Bonding on the Intensity and Frequency of OH Stretching Band in Alicyclic Substances

The change in intensity and frequency of O-H stretching band upon intramolecular hydrogen bonding was sufficiently examined for various proton acceptors of many alicyclic substances. The order of proton acceptors to bring about the intensity increase of constant degree is: Some discussions are given on these.     

光折变法制备的As2S8条形波导的光阻断效应

实验研究了As2S8薄膜光折变现象.提出并采用紫外光激励的方法试制了As2S8条形波导,导模激励显示该波导具有良好的导波特性.在此基础上,考察了As2S8条波导的光阻断效应,实现了光-光效应的开关功能.     

Optimization of mark edge recording waveform for a phase change rewritable optical disk using a 680 nm laser diode

A high density mark edge recording method on a phase change rewritable disk is reported. A carrier-to-noise ratio of 55 dB for a mark length of 0.55,μm is obtained by using a 680 nm, NA 0.6 head and a phase change rewritable disk. In mark edge recording, it is necessary to record each mark in correct length. A new laser power modulation pattern is proposed. This pattern consists of a first-pulse, a multi-pulse chain and a last-pulse. Both positions of the first-ptilse and the last-pulse are movable. By adjusting these positions, a jitter, σ/T_w (T_w is window margin), is improved to 6.5% in high density EFM (Eight to Fourteen Modulation) recording of 0.4 μm/bit.     

Analysis of the3 He(K−,K +)n reaction by the potential quark model

We analyze the production of H dihyperson (J ^π=0⁺,S=?2) via the (K ^?, K⁺) reaction by means of the non-relativistic quark model. First, the H mass and mass spectrum of single baryons are calculated. When the single baryon spectrum is well reproduced, the H dihyperson has the binding energies about 20 MeV or 60 MeV corresponding to the choice of the strength of the confinement potential. Using this model and parameters, cross sections for H production are estimated. A new effect, contributions from color-octetQ ³?Q ³ components of H dihyperson, is taken into account. The cross sections for H production are enhanced about ten times by these contributions. TheK ⁺-neutron coincidence cross section for H production is found to be 99–115 nb/sr² at theK ⁺ forward direction forM _H=2212 MeV and theK ^? beam momentum 1.8 GeV/c.     

统计优化迭代法测量质子交换波导折射率分布

提出了一种用于拟合测量渐变波导的折射率分布的新的理论处理。该方法把统计优化手段导入循环迭代法 ,可适用于费米函数这一类曲线变化范围大、且有多个自变量的函数。实验上用焦磷酸质子交换制备了LiNbO3波导样品 ,用该方法对退火后的折射率分布作了测量拟合 ,折射率拟合值与实验值的均方差为± 8.2× 10 - 4。