Redoxable nanosheet crystallites of MnO2 derived via delamination of a layered manganese oxide

This paper reports on the swelling and exfoliation behavior of a layered protonic manganese oxide, H(0.13)MnO(2).0.7H(2)O, in a solution of tetrabutylammonium (TBA) hydroxide and the formation and characterizations of unilamellar two-dimensional crystallites of MnO(2). At low doses of TBA ions, layered manganese oxide was observed to undergo normal intercalation, yielding a TBA intercalated phase with a gallery height of 1.25 nm. With a large excess of TBA ions, osmotic swelling occurred, giving rise to a very large intersheet separation of 3.5-7 nm. In an intermediate TBA concentration range, the sample exhibited a broad X-ray diffraction profile with superimposed diffraction features due to intercalation and osmotic swelling. The component responsible for the broad profile was isolated by centrifuging the mixture twice at different speeds, and the recovered colloid was identified as a pile of MnO(2) nanosheets, corresponding to the individual host layer of the precursor layered manganese oxide. Observations by transmission electron microscopy and atomic force microscopy revealed high two-dimensional anisotropy with a lateral dimension of submicrometers and a thickness of approximately 0.8 nm. The nanosheet exhibited broad optical absorption with a peak at 374 nm (epsilon = 1.13 x 10(4) mol(-1) dm(3) cm(-1)). The restacking process of the colloidal MnO(2) nanosheets was followed by aging the colloid at a relative humidity of 95%. The broad diffraction pattern due to the exfoliated sheets weakened with time and eventually resolved into two sharp distinct profiles attributable to a TBA intercalation compound with an intersheet spacing of 1.72 nm and an osmotically swollen hydrate with >10 nm at a very early stage. As drying progressed, the former phase became more abundant without a change in interlayer distance, while the degree of swelling of the latter phase gradually decreased to 2.7 nm that remained unchanged on further aging. Subsequent drying at a lower humidity collapsed the 2.7 nm phase. The resulting single 1.72 nm phase was dehydrated by heating at 150 degrees C to produce a phase with a contracted interlayer spacing of 1.3 nm.     

Interfacial electron transfer dynamics in dye-modified graphene oxide nanosheets studied by single-molecule fluorescence spectroscopy

Graphene oxide (GO) nanosheets have received a great deal of attention for a wide range of applications from optoelectronic devices to biological sensors. We now report a mechanistic study of the interfacial electron transfer (ET) processes between organic dye molecule, 9-phenyl-2,3,7-trihydroxy-6-fluorone (PF), and nanometre-sized GO sheets using ensemble-averaged and single-molecule spectroscopies. The ET dynamics was characterized by the direct observation of the PF radical cation during the laser flash photolysis, and its reaction rate was determined to be ~10(11) s(-1). The single-molecule fluorescence spectroscopy was utilized to clarify the heterogeneous nature of the interfacial ET within individual composites. Their fluorescence lifetimes and spectra were found to vary from composite to composite, possibly due to the different local structures and molecular interactions. The autocorrelation analysis of fluorescence intensity trajectories also revealed the temporal fluctuation of the ET reactivity.     

Remarkable reactivities of the xanthone ketyl radical in the excited state compared with that in the ground state

The properties and reactivities of the xanthone (Xn) ketyl radical (XnH*) in the doublet excited state (XnH*(D1)) were examined by using two-color two-laser flash photolysis. The absorption and fluorescence of XnH*(D1) were observed for the first time. Several factors governing the deactivation processes of XnH*(D1) such as interaction and reaction with solvent molecules were discussed. The remarkable change of reactivity of XnH*(D1) compared with that in the ground state (XnH*(D0)) was indicated from the experimental results. The rapid halogen abstraction of XnH*(D1) from some halogen donors such as carbon tetrachloride (CCl4) was found to occur. The halogen abstraction occurred more efficiently in the polar solvents than in the nonpolar solvents. It is suggested that the polar solvents promote the spin distribution of XnH*(D1) of the phenyl ring favorable to the halogen abstraction.     

Chemical Behavior of the Thiophene Ring in 2-Acetylthiophenes

The data on the methods of synthesis and chemical properties of the thiophene ring in 2-acetylthiophenes published over the last several years until mid 2007 are reviewed for the first time. Many of the synthesized compounds exhibit interesting biological activity in various fields and are used in the production of pharmaceuticals, agrochemicals, dyes, and electrophotogeneratoragents.     

Cyclic sample pooling using two‐dimensional liquid chromatography system enhances coverage in shotgun proteomics

We report a cyclic sample pooling technique devised in two‐dimensional liquid chromatography–electrospray ionization mass spectrometry (LC‐ESI‐MS) shotgun proteomics that renders deeper proteome coverage; we combined low pH reversed‐phase (RP) LC in trifluoroacetic acid in the first dimension, followed by cyclic sample pooling of the eluate and low‐pH RP‐LC in formic acid in the second dimension. The new protocol has a significantly higher resolving power suitable for LC‐ESI‐MS/MS shotgun proteomics. Copyright © 2013 John Wiley & Sons, Ltd.     

Identification of conjugation positions of urinary glucuronidated vitamin D3 metabolites by LC/ESI–MS/MS after conversion to MS/MS‐fragmentable derivatives

A liquid chromatography/electrospray ionization–tandem mass spectrometry‐based method was developed for the identification of the conjugation positions of the monoglucuronides of 25‐hydroxyvitamin D₃ [25(OH)D₃] and 24,25‐dihydroxyvitamin D₃ [24,25(OH)₂D₃] in human urine. The method employed derivatization with 4‐(4‐dimethylaminophenyl)‐1,2,4‐triazoline‐3,5‐dione to convert the glucuronides into fragmentable derivatives, which provided useful product ions for identifying the conjugation positions during the MS/MS. The derivatization also enhanced the assay sensitivity and specificity for urine sample analysis. The positional isomeric monoglucuronides, 25(OH)D₃‐3‐ and ‐25‐glucuronides, or 24,25(OH)₂D₃‐3‐, ‐24‐ and ‐25‐glucuronides, were completely separated from each other under the optimized LC conditions. Using this method, the conjugation positions were successfully determined to be the C3 and C24 positions for the glucuronidated 25(OH)D₃ and 24,25(OH)₂D₃, respectively. The 3‐glucuronide was not present for 24,25(OH)₂D₃, unlike 25(OH)D₃, thus we found that selective glucuronidation occurs at the C24‐hydroxy group for 24,25(OH)₂D₃.     

Photopatternable thin films from silyl hydride containing silicone resins and photobase generators

The photopatternability of various silyl hydride containing organosilicone resins containing the photobase generators N‐methylnifedipine or O‐(2‐nitrobenzyl)‐N‐octyl carbamate have been examined, with the goal of identifying potential photopatternable compositions with high thermal stability after cure. Two different categories of silicone resins have been prepared from combinations of diphenylsiloxane and methyl and hydrogen silsesquioxane units and a combination of phenyl and hydrogen silsesquioxane monomer units. The photobase generators were incorporated into these resins at concentrations up to 10 weight percent. UV‐irradiation of micrometer thick silicone resin‐photobase films through a photomask, under an air atmosphere, yielded micrometer scale features after development. Photopatternable compositions have been identified with photosensitivities of less than 50 mJ/cm2. The photopatterning process is believed to proceed by base‐catalyzed reaction of resin‐based silanol groups with neighboring silyl hydride groups to yield thermally stable siloxane crosslinks. Copyright © 1999 John Wiley & Sons, Ltd.