Complementary use of gas chromatography-mass spectrometry, gas chromatography-atomic emission detection and nuclear magnetic resonance for identification of pharmaceutically related impurities of unknown structures

The complementary use of gas chromatography-mass spectrometry (GC-MS), gas chromatography-atomic emission detection (GC-AED) and nuclear magnetic resonance (NMR) spectroscopy is demonstrated by the identification of four major by-products in a sample from an exploratory attempt to synthesise 1.3-dichloro-5-(difluoromethoxy)benzene. GC-MS was used for straightforward identification of the target compound and one of the impurities. By employing GC-AED, the sample was screened for heteroatoms in the analysed molecules and determination of the partial empirical formula of one sample component was carried out. The combined spectroscopic data obtained from the MS and AED experiments facilitated structure elucidation of two of the additional by-products. Finally, identification of the last unknown component could be obtained by combining spectral information from GC-MS, GC-AED and NMR data acquired after isolation of the impurity from the sample.     

Monitoring dioxins in food and feedstuffs using accelerated solvent extraction with a novel integrated carbon fractionation cell in combination with a CAFLUX bioassay

The concentrations of dioxins in fish oil and fish meal were determined with accelerated solvent extraction, using a novel integrated carbon fractionation extraction cell followed by a miniturized multilayer silica column and bioanalysis on a recently-developed chemically-activated fluorescent gene expression cell bioassay. The developed method allows for simultaneous gravimetric lipid weight determination, which was shown for both matrices under study (about 100% lipid recovery of each sample). Initial results practically meet the quality criteria on screening methods for control of dioxins in food and feedstuffs laid down in the EU Commission Directives 2002/69/EC (food) and 2002/70/EC (feed). This demonstrates that the developed method can be used as a screening tool for monitoring dioxins in food and feed after some additional improvements and testing on a greater number of matrices.     

Novel Layered Structures Formed by Iodocuprate Clusters Stabilized by Dialkylsulphide Ligands

From solutions of copper iodide and dodecyldimethylsulphonium iodide in acetonitrile, single crystals of [Cu₄I₄(DodecylMeS)₄] ( 1 ) and [Cu₃I₄(DodecylMeS)₃](DodecylMe₂S) ( 2 ) could be obtained. Both compounds crystallize in the triclinic crystal system, space group P1¯ ( 1 : a = 957.23(1), b = 967.25(2), c = 3818.38(6) pm, α = 90.3837(6)°, β = 86.4687(7)°, γ = 75.0996(7)°, 2 : a = 874.23(1), b = 979.29(1), c = 4388.75(4) pm, α = 90.4472(3)°, ß = 94.7088(3)°, γ = 116.1162(3)°). 1 consists of tetrahedral Cu₄ clusters, which are capped by four iodide ions over the tetrahedral faces. 2 contains trigonal Cu₃ clusters, which are coordinated by four iodide ions, one centered over the plane, three bridging over the edges of the Cu₃ triangle. In both compounds, the S atoms of (DodecylMeS) ligands coordinate to the Cu atoms. In 2 , a (DodecylMe₂S) cation is also present.     

Micellar electrokinetic chromatography with on-line Fourier transform infrared detection

Micellar electrokinetic chromatography (MEKC) was successfully coupled to Fourier transform infrared (FTIR) detection, using a micromachined IR-transparent flow cell with an optical path length of 15 micro m for the on-line detection of five neutral analytes. Tight connections between the flow cell and the capillaries were achieved by creating a small O-ring of UV-curing epoxy adhesive on the sharply cut capillary ends. The background electrolyte consisted of 15 mM phosphate buffer at pH 7 and 40 mM sodium dodecyl sulfate (SDS). Five analytes (paracetamol, caffeine, p-nitro benzyl alcohol, m-nitrophenol and p-nitrophenol) were successfully separated, yielding detailed IR stack plots that could be used for quantification and identification. Linear calibration graphs were obtained for each individual analyte present in mixtures at concentrations up to 10 mM. The limit of detection (3 S/N) ranged between 1.1 and 1.5 mM (1.2-1.8 ng). Analytes were identified by comparing spectra obtained during the MEKC separation with those resulting from completely filling the capillary with each individual analyte dissolved in the micelle-containing electrolyte. Information on the specific functional groups of all analytes could be elucidated from the spectra. Since FTIR is a nondestructive detection technique, a conventional on-line UV detector was introduced directly after the developed IR flow cell to test the system's performance and to demonstrate that tandem FTIR and UV detection is feasible.     

Gold-coated fused-silica sheathless electrospray emitters based on vapor-deposited titanium adhesion layers

Gold-coated fused-silica electrospray (ES) emitters based on vapor-deposited adhesion layers of titanium have been manufactured to investigate the possibilities of producing durable ES emitters applicable in chip-based analytical devices. The stabilities of the emitters were studied by both electrospray and electrochemical experiments and a marked increase in the emitter lifetime, compared to that for Cr/Au coated emitters, was found for the Ti/Au emitters in the ES durability tests. This indicates that Ti (rather than Cr) adhesion layers should be used in association with large-scale fabrication of ES emitters by vapor-deposition techniques. The lifetime of about 500-700 hours also allowed the Ti/Au-coated emitter to be used as an integrated part of a capillary liquid chromatography column coupled to a mass spectrometer in a series of LC/MS experiments. The Ti/Au coating was further studied by electrochemical techniques and scanning electron microscopy in conjunction with X-ray spectroscopy. It is shown that the eventual failure of the Ti/Au emitters in ES experiments was due to an almost complete detachment of the gold layer. Experimental evidence suggests that the detachment of the gold coating was due to a reduced adhesion to the titanium layer during oxidation in positive electrospray. Most likely, this was caused by the formation of an oxide layer on the titanium film. It is thus shown that unlimited emitter stabilities are not automatically obtained even if the metallic adhesion layer is stabilized by an oxide formation under positive electrospray conditions.     

Reaction of α-bromocarboxylic acids with hydrazine and dimethylhydrazine

Nucleofilic reaction of a series of α-bromocarboxylic acids with hydrazine and dimethylhydrazine is studied. High reactivity of α-bromocarboxylic acids is revealed and a series of α-hydrazinoarboxylic acids and N-(1-carboxyalkyl)-N,N-dimethylhydrazinium bromides are synthesized.     

A unique equilibrium efficient frontier with fixed-sum outputs in data envelopment analysis

Based on the equilibrium efficient frontier data envelopment analysis (EEFDEA) approach, Fang (J Oper Res Soc 67:412–420, 2015a) developed an equivalent linear programming model to improve and strengthen the EEFDEA approach. Furthermore, Fang (2015a) indicated that his secondary goal approach can achieve a unique equilibrium efficient frontier. However, through a simple counterexample we demonstrate that Fang’s secondary goal approach cannot always achieve uniqueness of the equilibrium efficient frontier. In this paper, we propose an algorithm based on the secondary goal approach to address the problem. The proposed algorithm is proven mathematically to be an effective approach to guaranteeing the uniqueness of the equilibrium efficient frontier.     

细胞显微光谱研究竹红菌甲素在癌细胞内的滞留效应

利用细胞显微光谱技术,在20000～12000cm-1范围内测量了经过浓度为20μg*mL-1竹红菌甲素(HA)培养23个小时的小鼠淋巴癌细胞和未经HA培养的小鼠淋巴癌细胞的光谱.结果显示两者有明显的差异,说明HA使癌细胞发生了改变;在经HA培养的细胞光谱中还检测到HA的荧光峰,提示HA在癌细胞中滞留.发展了利用显微光谱研究细胞在药物作用下的变化这一技术.     

Synthesis and Electrochemical Properties of Highly Crystallized CuV2O6 Nanowires

CuV₂O₆ nanowires were prepared via a simple hydrothermal route using NH₄VO₃ and Cu(NO₃)₂ as starting materials. The structures and electrochemical properties of CuV₂O₆ nanowires were characterized by means of X-ray diffraction(XRD), scanning electron microscopy(SEM) and transmission electron microscopy(TEM). The results show that the CuV₂O₆ nanowires are about 100 nm in width and single crystalline grown along [001] direction. CuV₂O₆ nanowires delivered a high initial discharge capacity of 435 and 351 mA·h/g at current densities of 50 and 100 mA·h/g, respectively. The electrochemical kinetics of the CuV₂O₆ nanowires was also investigated by means of electrochemical impedance spectroscopy(EIS) and the poor rate performance was observed, which may be attributed to the low ion diffusion coefficient of the CuV₂O₆ nanowires.     

Synthesis of a Thymidine Dimer Containing a Tetrazole‐2,5‐diyl Internucleosidic Linkage and Its Insertion into Oligodeoxynucleotides

Thymidine dimers in which the natural phosphodiester linkage has been replaced by a 2,5‐disubstituted tetrazole ring are synthesized and incorporated into oligodeoxynucleotides (ODNs). The synthesis is accomplished by two strategies based on an alkylation of 5′‐O‐trityl‐on and 5′‐O‐trityl‐off 3′‐deoxy‐3′‐(1H‐tetrazol‐5‐yl)thymidines with 5′‐iodo‐5′‐deoxythymidine in the presence of Et₃N, and the formation of only 2‐substituted tetrazol‐5‐yl linkages is observed in 89 and 46% yields, respectively. The nucleoside dimer formed is reacted with 4,4′‐dimethoxytrityl chloride (DMTCl), followed by treatment with 2‐cyanoethyl tetraisopropylphosphordiamidite in the presence of N,N‐diisopropylammonium tetrazolide, to afford the 5′‐O‐DMT‐protected dinucleoside phosphoramidite that is used for incorporation into ODNs on an automated DNA synthesizer. The modified ODNs with one and up to five tetrazole internucleosidic linkages are obtained in good yields. The thermal stability of DNA/DNA and DNA/RNA duplexes is studied by UV experiments and reported also.