Determination of Bismuth by Adsorptive Stripping Voltammetry Using Aluminum Oxide for Elimination of Environmental Sample Matrix Interferences

The aim of this work was to find a fast new and simple method for efficient elimination of negative influence of humic substances and synthetic surfactants in the voltammetric determination of bismuth. The negative influence of the organic matrix present in environmental water samples due to their adsorption on aluminum oxide was successfully evaluated. The organic compounds such as humic substances and surface active compounds were removed by adsorption on the surface of aluminum oxide from the water samples. The application of this method was the recovery of Bi(III) from spiked water samples.     

Molecular weight dependent charge carrier mobility in poly(3,3' '-dioctyl-2,2':5',2' '-terthiophene)

Poly(3,3' '-dioctyl-2,2':5',2' '-terthiophene), a polymer recently used for the fabrication of organic field effect transistors, has been fractionated into five fractions distinctly differing in their molecular weights (Mn), with the goal of determining the influence of the degree of polymerization (DPn) on its principal physicochemical parameters. It has been demonstrated that within the Mn range studied (from 1.5 kDa to 10.5 kDa by SEC), corresponding to DPn from 10 to 38, the polymer band gap steadily decreases with growing molecular weight, which is clearly manifested by an increasing bathochromic shift of the band originating from the pi-pi* transition. The same trend is observed for the HOMO level, determined from the onset of the p-doping in cyclic voltammetry, which shifts from -5.10 eV to -4.90 eV for the lowest and the highest molecular weight fractions, respectively. The most pronounced influence of DPn has been found for the charge carriers' mobility-one of the most important parameters of field effect transistors (FETs) fabricated from this polymer. A fourfold increase in DPn results in an increase of the carriers' mobility by more than 3 orders of magnitude. Comparison of these results with those obtained for fractionated regioregular poly(3-hexylthiophene) shows a strikingly similar behavior of both polymers with respect to the molecular weight.     

Stereodefined dinucleoside (3′,5′)-propionamidophosphonates and β-cyanoethylphosphonates and their incorporation into modified oligonucleotides

Base-catalyzed stereospecific anti-Markovnikov addition of dinucleoside (3′,5′)-H-phosphonates to the activated alkenes acrylamide and acrylonitrile resulting in the synthesis of P-chiral diastereomerically pure dinucleoside (3′,5′)-alkylphosphonates is reported.     

Simultaneous determination of terpenes and cannabidiol in hemp (Cannabis sativa L.) by fast gas chromatography with flame ionization detection

Hemp (Cannabis sativa L.) has become widely used in several sectors due to the presence of various bioactive compounds such as terpenes and cannabidiol. In general, terpenes and cannabidiol content is determined separately, which is time consuming. Thus, a fast gas chromatography with flame ionization detection method was validated for simultaneous determination of both terpenes and cannabidiol in hemp. The method enabled a rapid detection of 29 different terpenes and cannabidiol within a total analysis time of 16 min, with satisfactory sensitivity (limit of detection = 0.03–0.27 µg/mL, limit of quantitation = 0.10–0.89 µg/mL). The inter‐ and intraday precision (RSD) was <7.82 and <3.59%, respectively. Recoveries at two spiked concentration levels (low, 3.15 µg/mL; high, 20.0 µg/mL) were determined on both apical leaves (78.55–101.52%) and inflorescences (77.52–107.10%). The reproducibility (RSD) was <5.94 and <5.51% in apical leaves and inflorescences, respectively. The proposed and validated method is highly sensitive, robust, fast, and accurate for determination of the main terpenes and cannabidiol in hemp and could be routinely used for quality control.     

Synthesis and Characterization of Rhenium(V) Oxo Complexes with a New Thiol-Amide-Thiourea Ligand System. X-ray Crystal Structure of [1-Phenyl-3-[2-((2-thioacetyl)amino)ethyl]thioureato]oxorhenium(V)

General methods for preparing Re(V)O complexes with a novel series of thiol-amide-thiourea (TATU) ligands, a new class of N(2)S(2) chelates, were developed. The TATU ligands, the first multidentate systems designed with a bidentate thiourea moiety, have been used to prepare the first high-valent transition metal complexes with bidentate thiourea coordination. Direct reaction of N-(2-aminoethyl)-2-((triphenylmethyl)thio)acetamide (1) with phenyl, 4-methoxyphenyl, 4-chlorophenyl, and methyl isothiocyanate afforded ready access to the corresponding S-protected TATU ligands in one step. A two-step preparation of the N,N-dimethylthiourea TATU ligand derived from 1 was also developed. Deprotection of thiols in trifluoroacetic acid with triethylsilane followed by a ligand exchange reaction with Re(V)O precursors yielded neutral ReO(TATU) complexes. The structure of [1-phenyl-3-[2-((2-thioacetyl)amino)ethyl]thioureato]oxorhenium(V) (6a) was determined by X-ray diffraction methods. Crystal data for 6a: C(11)H(12)N(3)O(2)ReS(2), fw 468.6, orthorhombic, Pca2(1); a = 22.605(5) ?, b = 13.029(3) ?, c= 9.698(2) ?; V = 2856.3(11) ?(3); Z = 8. The coordination environment of 6a was pseudo-square-pyramidal with a deprotonated thiol S, deprotonated amide N, deprotonated thiourea N, and thiocarbonyl S coordinated in the basal plane and the oxo ligand in the apical position. The thiourea function forms a four-membered chelate ring in the multidentate TATU ligands. The two N-C and the S-C bond distances within the monodeprotonated thiourea moiety were typical of bonds with multiple-bond character. Solution (1)H NMR data for all five complexes were consistent with the solid-state structure of 6a. A broad singlet attributable to the uncoordinated NH group of thiourea was observed for the monosubstituted thiourea complexes but was not present for the N,N-dimethylthiourea derivative. Instead, two singlets of equal intensity were observed for the two methyl groups, indicating that there is restricted rotation around the C-N(CH(3))(2) bond and an extended pi system in the thiourea moiety. The four-membered ring might cause difficulty because the M-S distance would be relatively long in an undistorted ligand. This may be the reason such chelate ligands have not been previously investigated. However, the N-C-S angle narrows to approximately 105 degrees, permitting a Re-S bond with a typical bond length to be formed. We conclude that such a ring represents a versatile new building block to create multidentate ligands.     

Catalytic transesterification of dialkyl phosphates by a bioinspired dicopper(II) macrocyclic complex

For a number of phosphoryltransfer enzymes, including the exonuclease subunit of DNA polymerase I, a mechanism involving two-metal ions and double Lewis-acid activation of the substrate, combined with leaving group stabilization, has been proposed. Inspired by the active site structure of this enzyme, we have designed as a synthetic phosphoryl transfer catalyst the dicopper(II) macrocyclic complex LCu(2). Crystal structures of complexes [(L)Cu(2)(mu-NO(3))(NO(3))](NO(3))(2) (1), [(L)Cu(2)(mu-CO(3))(CH(3)OH)](BF(4))(2) (2), and [(L)Cu(2)(mu-O(2)P(OCH(3))(2))(NO(3))](NO(3))(2) (3) illustrate various possibilities for the interaction of oxoanions with the dicopper(II) site. 1 efficiently promotes the transesterification of dimethyl phosphate (DMP) in CD(3)OD, k(cat) = 2 x 10(-)(4) s(-)(1) at 55 degrees C. 1 is the only available catalyst for the smooth transesterification of highly inert simple dialkyl phosphates. From photometric titrations and the pH dependence of reactivity, we conclude that a complex [(L)Cu(2)(DMP)(OCH(3))](2+) is the reactive species. Steric bulk at the -OR substituents of phosphodiester substrates O(2)P(OR)(2)(-) drastically reduces the reactivity of 1. This is explained with -OR leaving group stabilization by Cu coordination, an interaction which is sensitive to steric crowding at the alpha-C-atom of substituent R. A proposed reaction mechanism related to that of the exonuclease unit of DNA polymerase I is supported by DFT calculations on reaction intermediates. The complex [(L)Cu(3)(mu(3)-OH)(mu-CH(3)O)(2)(CH(3)CN)(2)](ClO(4))(3) (4) incorporates a [Cu(OH)(OCH(3))(2)(CH(3)CN)(2)](-) complex anion, which might be considered as an analogue of the [PO(2)(OCH(3))(2)(OCD(3))](2)(-) transition state (or intermediate) of DMP transesterification catalyzed by LCu(2).     

In situ detection of a single carotenoid crystal in a plant cell using Raman microspectroscopy

It is the first report of direct, in situ detection of carotenoids at the subcellular level by using Raman microspectroscopy. Single crystals sequestered in a carrot cell were measured using FT-Raman spectrometer equipped with a microscope and 40× objective. The observed characteristic bands centered at 1518 cm⁻¹ and 1156 cm⁻¹ proved the crystals were composed of carotenoids with β-carotene being predominant. The obtained results show the potential of Raman microspectroscopy for identification and analysis of compounds localized in cytoplasm by taking measurements directly from a single plant cell.     

A novel approach to the rapid determination of amoxicillin in human plasma by solid phase microextraction and liquid chromatography

A new approach to the rapid determination of amoxicillin (AMO) in human plasma followed by solid phase microextraction (SPME) fiber coatings based on conducting polymers (polypyrrole and polythiophene) and high performance liquid chromatography (HPLC) has been described. The porous structures of the electrochemically deposited polymer coatings have been characterized by scanning electron microscopy (SEM). The experimental parameters relating to the extraction efficiency of the SPME fibers such as pH, extraction time and desorption conditions (solvents, time) were studied and selected. The SPME/HPLC-UV method was linear over a working range of 1-50 μg ml(-1). The inter-day accuracy (expressed as coefficients of variations, CVs) was less than 15% and precision (expressed as the relative standard deviations, RSDs) with percentage values was less than 5.9%. Amoxicillin was found to be stable in the human plasma at room temperature (20 °C) within 8 hours. The developed method was successfully applied to the analysis of real human plasma samples. The limit of detection and limit of quantification for amoxicillin in plasma were 1.21 μg ml(-1) and 3.48 μg ml(-1), respectively.     

Bio-dissolution of colloidal-size clay minerals entrapped in microporous silica gels

Four colloidal-size fractions of strongly anisotropic particles of nontronite (NAu-2) having different ratios of basal to edge surfaces were incubated in the presence of heterotrophic soil bacteria to evaluate how changes in mineral surface reactivity influence microbial dissolution rate of minerals. To avoid any particle aggregation, which could change the reactive surface area available for dissolution, NAu-2 particles were immobilized in a biocompatible TEOS-derived silica matrix. The resulting hybrid silica gels support bacterial growth with NAu-2 as the sole source of Fe and Mg. Upon incubation of the hybrid material with bacteria, between 0.3% and 7.5% of the total Fe included in the mineral lattice was released with a concomitant pH decrease. For a given pH value, the amount of released Fe varied between strains and was two to twelve-fold higher than under abiotic conditions. This indicates that complexing agents produced by bacteria play an important role in the dissolution process. However, in contrast with proton-promoted NAu-2 dissolution (abiotic incubations) that was negatively correlated with particle size, bacterial-enhanced dissolution was constant for all size fractions used. We conclude that bio-dissolution of nontronite particles under acidic conditions seems to be controlled by bacterial metabolism rather than by the surface reactivity of mineral.