Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy of a single endothelial cell

Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) with the use of a slide-on germanium accessory followed by chemometric analysis allowed for providing meaningful information about the biochemical composition of a single endothelial cell. In this work, the methodology of the ATR-FTIR measurements of dried cells and dried cells immersed in water solution is presented. The contact of the cell and Ge crystal was set up manually and monitored through the integration of the amide I band. Additionally, the cell imaging in transreflection mode was tested, but the spectral differences between sub-cellular structures were not prominent in the registered spectra. It has been shown that the ATR-FTIR method gives better results due to the increased spatial resolution and S/R ratio as well as small contribution of the optical artifacts.     

Luminescent di- and polynuclear organometallic gold(I)-metal (Au2, {Au2Ag}n and {Au2Cu}n) compounds containing bidentate phosphanes as active antimicrobial agents

The reaction of new dinuclear gold(I) organometallic complexes containing mesityl ligands and bridging bidentate phosphanes [Au(2)(mes)(2)(μ-LL)] (LL=dppe: 1,2-bis(diphenylphosphano)ethane 1a, and water-soluble dppy: 1,2-bis(di-3-pyridylphosphano)ethane 1b) with Ag(+) and Cu(+) lead to the formation of a family of heterometallic clusters with mesityl bridging ligands of the general formula [Au(2)M(μ-mes)(2) (μ-LL)][A] (M=Ag, A=ClO(4)(-), LL=dppe 2a, dppy 2b; M=Ag, A=SO(3)CF(3)(-), LL=dppe 3a, dppy 3b; M=Cu, A=PF(6)(-), LL=dppe 4a, dppy 4b). The new compounds were characterized by different spectroscopic techniques and mass spectrometry The crystal structures of [Au(2)(mes)(2)(μ-dppy)] (1b) and [Au(2)Ag(μ-mes)(2)(μ-dppe)][SO(3)CF(3)] (3a) were determined by a single-crystal X-ray diffraction study. 3a in solid state is not a cyclic trinuclear Au(2)Ag derivative but it gives an open polymeric structure instead, with the {Au(2)(μ-dppe)} fragments "linked" by {Ag(μ-mes)(2)} units. The very short distances of 2.7559(6)?? (Au-Ag) and 2.9229(8)?? (Au-Au) are indicative of gold-silver (metallophilic) and aurophilic interactions. A systematic study of their luminescence properties revealed that all compounds are brightly luminescent in solid state, at room temperature (RT) and at 77?K, or in frozen DMSO solutions with lifetimes in the microsecond range and probably due to the self-aggregation of [Au(2)M(μ-mes)(2)(μ-LL)](+) units (M=Ag or Cu; LL=dppe or dppy) into an extended chain structure, through Au-Au and/or Au-M metallophilic interactions, as that observed for 3a. In solid state the heterometallic Au(2)M complexes with dppe (2a-4a) show a shift of emission maxima (from ca. 430 to the range of 520-540?nm) as compared to the parent dinuclear organometallic product 1a while the complexes with dppy (2b-4b) display a more moderate shift (505 for 1b to a max of 563?nm for 4b). More importantly, compound [Au(2)Ag(μ-mes)(2)(μ-dppy)]ClO(4) (2b) resulted luminescent in diluted DMSO solution at room temperature. Previously reported compound [Au(2)Cl(2)(μ-LL)] (LL dppy 5b) was also studied for comparative purposes. The antimicrobial activity of 1-5 and Ag[A] (A=ClO(4)(-), SO(3)CF(3)(-)) against gram-positive and gram-negative bacteria and yeast was evaluated. Most tested compounds displayed moderate to high antibacterial activity while heteronuclear Au(2)M derivatives with dppe (2a-4a) were the more active (minimum inhibitory concentration 10 to 1?μg?mL(-1)). Compounds containing silver were ten times more active to gram-negative bacteria than the parent dinuclear compound 1a or silver salts. Au(2)Ag compounds with dppy (2b, 3b) were also potent against fungi.     

Roulette-wheel selection via stochastic acceptance

Roulette-wheel selection is a frequently used method in genetic and evolutionary algorithms or in modeling of complex networks. Existing routines select one of N individuals using search algorithms of O(N) or O(logN) complexity. We present a simple roulette-wheel selection algorithm, which typically has O(1) complexity and is based on stochastic acceptance instead of searching. We also discuss a hybrid version, which might be suitable for highly heterogeneous weight distributions, found, for example, in some models of complex networks. With minor modifications, the algorithm might also be used for sampling with fitness cut-off at a certain value or for sampling without replacement.     

Meshless methods for the inverse problem related to the determination of elastoplastic properties from the torsional experiment

The problem of determining the elastoplastic properties of a prismatic bar from the given experimental relation between the torsional moment M and the angle of twist per unit length of the rod’s length θ is investigated as an inverse problem. The proposed method to solve the inverse problem is based on the solution of some sequences of the direct problem by applying the Levenberg-Marquardt iteration method. In the direct problem, these properties are known, and the torsional moment is calculated as a function of the angle of twist from the solution of a non-linear boundary value problem. This non-linear problem results from the Saint-Venant displacement assumption, the Ramberg–Osgood constitutive equation, and the deformation theory of plasticity for the stress–strain relation. To solve the direct problem in each iteration step, the Kansa method is used for the circular cross section of the rod, or the method of fundamental solutions (MFS) and the method of particular solutions (MPS) are used for the prismatic cross section of the rod. The non-linear torsion problem in the plastic region is solved using the Picard iteration.     

Metal ion complexation in acetonitrile by di-ionized calix[4]arenes bearing two dansyl fluorophores

The influence of metal cations (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Ag⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Zn²⁺ and Fe³⁺) on the spectroscopic properties of two dansyl (1-dimethylaminonaphthalene-5-sulfonyl) groups linked to the lower rims of a series of three, structurally related, di-ionized calix[4]arenes was investigated by means of absorption and emission spectrophotometry. Di(tetramethylammonium) salts of the di-ionized ligands, (TMA)₂L1, (TMA)₂L2 and (TMA)₂L3, which differ in having zero, two and four tert-butyl groups, respectively, on the upper rim of the calix[4]arene scaffold were utilized for the spectrofluorimetric titration experiments in acetonitrile. On complexation by alkaline earth metal cations, both the absorption and emission spectra undergo marked red shifts and quenching of the dansyl fluorescence. These effects are weaker with alkali metal cations. Transition metal cations interact strongly with the ligands. In particular, Fe³⁺, Hg²⁺ and Pb²⁺ cause greater than 97% quenching of the dansyl fluorescence in the di-ionized ligands.     

The heat risk during hardening of dental glass-ionomer cements using a light-curing

Journal of Thermal Analysis and Calorimetry - An use of a polymerization lamp to irradiate chemically hardened glass-ionomer materials may improve their properties and accelerate the setting time....     

The effect of trace additions of copper and pretreatment conditions on the filiform corrosion of powder-coated aluminium alloy AA6060

This paper presents a short review of the literature data and the newest studies of filiform corrosion (FFC) testing of profiles extruded using a recycling-friendly AA 6xxx aluminium alloy, with Cu content up to 0.09 wt%. As the pretreatment plays a significant role in avoiding FFC on powder-coated aluminium profiles, the profiles were pretreated and coated at three different production sites. They have been tested at 40°C, 82% RH for 1000 hours (according to modified ISO 4623-2). It was observed that differences in FFC behaviour of the same type of profile coated at different plants were more significant than differences between samples with increasing Cu content. In order to understand the differences between profiles coated at different sites, GDOES analysis of samples was performed, specially focusing on surface enrichment of copper through the pretreatment.     

Qualitative and Quantitative Analysis of Secondary Metabolites in Morphological Parts of Paulownia Clon In Vitro 112® and Their Anticoagulant Properties in Whole Human Blood

It is not easy to find data in the scientific literature on the quantitative content of individual phytochemicals. It is possible to find groups of compounds and even individual compounds rather easily, but it is not known what their concentration is in cultivated or wild plants. Therefore, the subject of this study was to determine the content of individual compounds in the new Paulownia species, Oxytree, developed in a biotechnology laboratory in 2008 at La Mancha University in Spain. Six secondary metabolites were isolated, and their chemical structure was confirmed by spectral methods. An analytical method was developed, which was then used to determine the content of individual compounds in leaves, twigs, flowers and fruits of Paulownia Clon in Vitro 112^®. No flavonoids were found in twigs and fruits of Oxytree, while the highest phenylethanoid glycosides were found in twigs. In this study, we also focused on biological properties (anticoagulant or procoagulant) of extract and four fractions (A–D) of different chemical composition from Paulownia Clon in Vitro 112 leaves using whole human blood. These properties were determined based on the thrombus-formation analysis system (T-TAS), which imitates in vivo conditions to assess whole blood thrombogenecity. We observed that three fractions (A, C and D) from leaves decrease AUC₁₀ measured by T-TAS. In addition, fraction D rich in triterpenoids showed the strongest anticoagulant activity. However, in order to clarify the exact mechanism of action of the active substances present in this plant, studies closer to physiological conditions, i.e., in vivo studies, should be performed, which will also allow to determine the effects of their long-term effects.     

Low leakage stoichiometric SrTiO3 dielectric for advanced metal–insulator–metal capacitors

Metal–insulator–metal capacitors (MIMCAP) with stoichiometric SrTiO₃ dielectric were deposited stacking two strontium titanate (STO) layers, followed by intermixing the grain determining Sr‐rich STO seed layer, with the Ti‐rich STO top layer. The resulted stoichiometric SrTiO₃ would have a structure with less defects as demonstrated by internal photoemission experiments. Consequently, the leakage current density is lower compared to Sr‐rich STO which allow further equivalent oxide thickness downscaling.

Schematic of MIMCAP with stoichiometric STO dielectric formed from bottom Sr‐rich STO and top Ti‐rich STO after intermixing during crystallization anneal.