Composition of Selected Lipid Fractions in 13 Alpine Cryophytic Plant Species Growing in the Eastern Pamir Mountains,Tajikistan

Chemistry of Natural Compounds -     

Simulation of electroporated cell by chronopotentiometry

Chronopotentiometry on planar lipid bilayer (BLM) is proposed as a method for modeling the electrical phenomena in electroporated cell. Two techniques are discussed: constant-current and linear-current chronopotentiometry. It is proposed that the constant-current chronopotentiometry may provide basis for modeling the electroporated cell shortly after the removal of the electric field, when activity of cellular pumps counteracts ionic fluxes through the electropore and ionic channels. The linear-current method can be considered for modeling the cell in the later stage after electroporation, when energetical resources of the cell are gradually getting exhausted and the activity of pumps decreases. Based on this idea, it may be postulated that the electropore in the cell has fluctuating dynamics whose stochastic characteristics, similarly as biological channels, shows 1/f noise. The model implies that the fluctuations would disappear leaving the electropore with a constant resistance when efficiency of the pumps becomes very small. The results of chronopotentiometry also may suggest that opening time, conductivity and selectivity of the electropore can be controlled by the cell environment or membrane composition.     

Investigation of porous structure of packing materials based on 1‐vinyl‐2‐pyrrolidone

Highly crosslinked copolymers of 1‐vinyl‐2‐pyrrolidone (VP) were obtained in the form of microspheres by combined suspension–emulsion polymerization. The porous structure of the copolymers was created by the use of proper diluents. The main parameters of porous structure were established in the dry and wet states. Three methods: inverse size‐exclusion chromatography (ISEC), nitrogen adsorption, and small X‐ray scattering (SAXS) were used in porous structure investigations. It was shown that the determined parameters strongly depend on the chosen method and the microspheres can be used as packing materials in chromatography. Copyright © 2014 John Wiley & Sons, Ltd.     

Comparison of contact angle hysteresis of different probe liquids on the same solid surface

Advancing and receding contact angles of water, formamide and diiodomethane were measured on 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) layers deposited on three different solid supports—glass, mica and poly(methyl methacrylate). Up to five statistical monolayers were deposited on the surfaces by spreading DPPC solution. It was found that even on five statistical DPPC monolayers, the hysteresis of a given liquid depends on the kind of solid support. Also on the same solid support the contact angle hysteresis is different for each probe liquid used. The AFM images show that the heights of roughness of the DPPC films cannot be the primary cause of the observed hysteresis because the heights are too small to cause the observed hystereses. It is believed that the hysteresis is due to the liquid film present right behind the three-phase solid surface/liquid drop/gas (vapour) contact line and the presence of Derjaguin pressure. The value of contact angle hysteresis depends on both the solid surface and liquid properties as well as on intermolecular interactions between them.     

Thermochemistry of phosphate glasses for immobilization of dangerous waste

Vitrification is currently considered to be an effective method for immobilization of radioactive waste. It is based on the enclosing of harmful elements in the structure of the glass. This work presents the results of studies on the thermal properties of glasses from P₂O₅–Al₂O₃–Na₂O and P₂O₅–Al₂O₃–Fe₂O₃–Na₂O systems for rendering nuclear waste in the form of salts such as sulfates, halides, and phosphates with high sodium content. These substances are not accepted by borosilicate glass, commonly used up to now for nuclear waste immobilization. Formation of sinters of glass-waste mixtures was selected as the method for immobilization, and the thermal chemistry of this process was studied. CaCl₂ was used as the model chloride waste substance. The process of immobilization consists of its sintering with Na, Al, Fe-phosphate glasses containing more than 50 wt% P₂O₅ as the amorphous matrix. Thermal analysis showed that all glasses exhibit an ability for crystallization, with that the intensiveness of this process is determined by the chemical composition of these glasses. The addition of Fe₂O₃ to the glass intensified crystallization process. Leaching of components of sinters tests established that glass containing Fe₂O₃ in its composition most effectively binds waste in comparison to Al₂O₃ containing phosphate glass. The test results allow for the statement that the waste substance in the form of chloride salts such as CaCl₂ is stable bound in the glass–crystalline sinters, which ensures its effective immobilization.     

Luminescent di- and polynuclear organometallic gold(I)-metal (Au2, {Au2Ag}n and {Au2Cu}n) compounds containing bidentate phosphanes as active antimicrobial agents

The reaction of new dinuclear gold(I) organometallic complexes containing mesityl ligands and bridging bidentate phosphanes [Au(2)(mes)(2)(μ-LL)] (LL=dppe: 1,2-bis(diphenylphosphano)ethane 1a, and water-soluble dppy: 1,2-bis(di-3-pyridylphosphano)ethane 1b) with Ag(+) and Cu(+) lead to the formation of a family of heterometallic clusters with mesityl bridging ligands of the general formula [Au(2)M(μ-mes)(2) (μ-LL)][A] (M=Ag, A=ClO(4)(-), LL=dppe 2a, dppy 2b; M=Ag, A=SO(3)CF(3)(-), LL=dppe 3a, dppy 3b; M=Cu, A=PF(6)(-), LL=dppe 4a, dppy 4b). The new compounds were characterized by different spectroscopic techniques and mass spectrometry The crystal structures of [Au(2)(mes)(2)(μ-dppy)] (1b) and [Au(2)Ag(μ-mes)(2)(μ-dppe)][SO(3)CF(3)] (3a) were determined by a single-crystal X-ray diffraction study. 3a in solid state is not a cyclic trinuclear Au(2)Ag derivative but it gives an open polymeric structure instead, with the {Au(2)(μ-dppe)} fragments "linked" by {Ag(μ-mes)(2)} units. The very short distances of 2.7559(6)?? (Au-Ag) and 2.9229(8)?? (Au-Au) are indicative of gold-silver (metallophilic) and aurophilic interactions. A systematic study of their luminescence properties revealed that all compounds are brightly luminescent in solid state, at room temperature (RT) and at 77?K, or in frozen DMSO solutions with lifetimes in the microsecond range and probably due to the self-aggregation of [Au(2)M(μ-mes)(2)(μ-LL)](+) units (M=Ag or Cu; LL=dppe or dppy) into an extended chain structure, through Au-Au and/or Au-M metallophilic interactions, as that observed for 3a. In solid state the heterometallic Au(2)M complexes with dppe (2a-4a) show a shift of emission maxima (from ca. 430 to the range of 520-540?nm) as compared to the parent dinuclear organometallic product 1a while the complexes with dppy (2b-4b) display a more moderate shift (505 for 1b to a max of 563?nm for 4b). More importantly, compound [Au(2)Ag(μ-mes)(2)(μ-dppy)]ClO(4) (2b) resulted luminescent in diluted DMSO solution at room temperature. Previously reported compound [Au(2)Cl(2)(μ-LL)] (LL dppy 5b) was also studied for comparative purposes. The antimicrobial activity of 1-5 and Ag[A] (A=ClO(4)(-), SO(3)CF(3)(-)) against gram-positive and gram-negative bacteria and yeast was evaluated. Most tested compounds displayed moderate to high antibacterial activity while heteronuclear Au(2)M derivatives with dppe (2a-4a) were the more active (minimum inhibitory concentration 10 to 1?μg?mL(-1)). Compounds containing silver were ten times more active to gram-negative bacteria than the parent dinuclear compound 1a or silver salts. Au(2)Ag compounds with dppy (2b, 3b) were also potent against fungi.     

Application of new synthesized zwitterionic surfactants as hair shampoo components

Abstract

The purpose of the study was to applicate new synthesized zwitterionic surfactants as hair shampoo components. Hair shampoos formulated for the study contained newly synthesized sulfobetaines at a concentration of 2%. The above additives were evaluated to determine their effect on shampoo dynamic viscosity, texture, yield stress, foaming properties and surface tension of aqueous shampoo solutions. The viscosity of the sulfobetaine-enriched hair shampoos ranged between 6,000 and 21,000?mPa·s, which ensures the required application properties of the formulated products. The yield stress in three prototypical shampoos was equal to approximately 10?Pa, which represents the minimum value that should characterize cosmetics of this type. The sulfobetaines added to the formulations were not found to significantly affect the parameters of hardness and adhesive force. All the formulations under study, except for the shampoo containing N-dodecyl-N-piperidinium-1-propanesulfonate, exhibited good foaming properties. The incorporation of sulfobetaines into hair shampoos contributes to an effective decrease in the surface tension of their aqueous solutions, which may indicate beneficial washing properties. The use of the proposed sulfobetaines in hair shampoos favorably modifies their physicochemical and functional properties. The findings of the study can provide useful insights for the formulation of hair shampoos containing zwitterionic surfactants.     

Characterisation of selenium compounds in rye seedling biomass using <Superscript>75</Superscript>Se-labelling/SDS-PAGE separation/γ-scintillation counting,and HPLC-ICP-MS analysis of a range of enzymatic digests

In the present study, selenium-enriched plant biomass was investigated to evaluate the ability of rye seedlings to take up, and assimilate, inorganic selenium. Two different analytical approaches were used. Electrophoretic separation (SDS-PAGE) of proteins extracted from ⁷⁵Se-labelled biomass was used to investigate the biotransformation of selenite into organic forms of the element. Ion-pair chromatography coupled with ICP-MS detection was chosen for the analysis of selenium species, enzymatically extracted from the plant biomass. The results of three enzymatic hydrolysis procedures and three sequential enzymatic extractions procedures are compared. The most effective single extraction was proteolysis (using protease type XIV), giving an overall extraction efficiency of 48%. However, for combinations of enzymes, the most effective was cellulase (Trichoderma viride) followed by sequential extraction of the solid pellet using protease type XIV, giving an extraction efficiency of 70%. The complementary data from the electrophoretic fractionation of proteins, and the HPLC separation of Se-species in the proteolytic digests, reveal the existence of large number of selenium-containing compounds in the rye seedling plant biomass. The results showed the complete biotransformation of inorganic selenium into organic forms during germination of the rye seedlings. HPLC-ICP-MS analysis of extracts from the plant biomass did not show the presence of selenate or selenite. At the time of this study, the lack of suitable organic-MS facilities meant that it was not possible to characterise them fully. However, the data does show that a combination of different enzymes, rather than just the commonly-used protease, should be considered when developing an extraction strategy for selenium in different food types to those already reported in the literature.