Fundamental Methods for the Phase Transfer of Nanoparticles

The utilization of nanoparticles for a variety of applications has raised much interest in recent years as new knowledge has emerged in nanochemistry. New and diverse methods for synthesis, characterization, and application of these particles have been discovered with differing degrees of ease and reproducibility. Post-synthetic modification of nanoparticles is often a required step to facilitate their use in applications. The reaction conditions and chemical environment for the nanoparticle synthesis may not support or may conflict with further reactions. For this reason, it is beneficial to have phase transfer methods for nanoparticles to allow for their dispersion in a variety of solvents. Phase transfer methods are often limited in the types and sizes of particles that can be effectively dispersed in an immiscible solvent. Currently, general transfer methods for a wide variety of nanoparticles have not been identified. New routes for phase transfer allow for utilization of a larger range of particles in applications which were previously limited by solubility and reactivity issues. In this work, we will describe the fundamental methods for the phase transfer of metallic nanoparticles. We will look at the major problems and pitfalls of these methods. The applications of phase transfer will also be reviewed, mainly focusing on catalysis and drug delivery.     

Intact cell matrix-assisted laser desorption/ionization mass spectrometry as a tool to screen drugs in vivo for regulation of protein expression

Here we demonstrate for the first time the application of intact cell matrix-assisted laser desorption/ionization mass spectrometry (ICM-MS) to study the regulation of protein expression. This technique can be extended to screen the drugs that inhibit protein synthesis in various diseases. We have used Escherichia coli cells expressing a recombinant glutathione-S-transferase (GST) gene under an arabinose-inducible promoter as a model system. Using ICM-MS analysis, we have detected a 28 kDa peak corresponding to the production of recombinant GST under the arabinose-induced condition. Furthermore, recombinant GST protein was purified by a single-step affinity purification using a glutathione Sepharose 4B affinity column from arabinose-induced E. coli cells. The purified GST protein was found to be a 28 kDa protein by MALDI analysis suggesting the arabinose-induced protein is indeed GST. The regulation of protein expression was studied using glucose as an alternative metabolite. The glucose-mediated regulation of the ara-operon was followed using the ICM-MS technique. All the results obtained from ICM-MS data were validated using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) analysis. The present technique can be extended for in vivo screening of drugs and it holds tremendous potential to discover novel drugs against specific protein expressions in different diseases.     

Organotellurium derivatives : IV. Synthesis of some diaryltellurium dihalides and pseudohalides

Iodine monohalides (ICl, IBr), cyanogen halides (CNBr, CNI) and thiocyanogen (SCN)₂ add oxidatively to diaryltellurium(II), R₂Te (R = Ph, p-Ch₃OC₆H₄) under mild conditions ( °C). The resulting organotellurium(IV) derivatives react metathetically with silver pseudohalides to yield several new diaryltellurium(IV) pseudohalide derivatives.     

Structural and optical characterization of Ag-doped TiO2 nanoparticles prepared by a sol–gel method

Undoped and silver-doped TiO₂ nanoparticles (Ti_1?x Ag _x O₂, where x?=?0.00?C0.10) were synthesized by a sol?Cgel method. The synthesized products were characterized by X-ray diffraction (XRD), particle size analyzer (PSA), scanning electron microscope (SEM), and UV?CVisible spectrophotometer. XRD pattern confirmed the tetragonal structure of synthesized samples. Average crystallite size of synthesized nanoparticles was determined from X-ray line broadening using the Debye?CScherrer formula. The crystallite size was varied from 8 to 33?nm as the calcination temperature was increased from 300 to 800?°C. The incorporation of 3 to 5% Ag⁺ in place of Ti⁴⁺ provoked a decrease in the size of nanocrystals as compared to undoped TiO₂. The SEM micrographs revealed the agglomerated spherical-like morphology of particles. SEM, PSA, and XRD measurements show that the particles size of the powder is in nanoscale. Optical absorption measurements indicated a red shift in the absorption band edge upon silver doping. Direct allowed band gap of undoped and Ag-doped TiO₂ nanoparticles measured by UV?CVis spectrometer were 3.00 and 2.80?eV, respectively, at 500?°C.     

Effect of ion velocity on SHI-induced mixing in Ti/Bi system

Energetic ion beams are proving to be versatile tools for modification and depth profiling of materials. The energy and ion species are the deciding factor in the ion-beam-induced materials modification. Among the various parameters such as electronic energy loss, fluence and heat of mixing, velocity of the ions used for irradiation plays an important role in mixing at the interface. The present study is carried out to find the effect of the velocity of swift heavy ions on interface mixing of a Ti/Bi bilayer system. Ti/Bi/C was deposited on Si substrate at room temperature by an electron gun in a high-vacuum deposition system. Carbon layer is deposited on top to avoid oxidation of the samples. Eighty mega electron volts Au ions and 100?MeV Ag ions with same value of S_e for Ti are used for the irradiation of samples at the fluences 1?×?10¹³–1?×?10¹⁴ ions/cm². Different techniques like Rutherford backscattering spectroscopy, atomic force microscopy and grazing incidence X-ray diffraction were used to characterize the pristine and irradiated samples. The mixing effect is explained in the framework of the thermal spike model. It has been found that the mixing rate is higher for low-velocity Au ions in comparison to high-velocity Ag ions. The result could be explained as due to less energy deposition in thermal spike by high-velocity ions.     

Simultaneous determination of bergenin and gallic acid in Bergenia ligulata wall by high-performance thin-layer chromatography

A simple and reproducible high-performance thin-layer chromatographic method was developed for the simultaneous determination of bergenin and gallic acid in Bergenia ligulata. Water and methanol were used as the extracting solvents. The concentrations of bergenin and gallic acid in both of these solvents were found to be almost the same. The method involves separation of the components by thin-layer chromatography on a precoated Silica Gel 60 F254 plate with a solvent system of ethyl acetate-formic acid-acetic acid-water (100 + 11 + 11 + 27). The sensitivity of the method for bergenin was 0.30 microg, whereas for gallic acid it was 0.25 microg. The proposed method is precise and sensitive and can be used for the detection, monitoring, and simultaneous quantification of bergenin and gallic acid in B. ligulata.     

Facile Hydrolysis of Esters with KOH-Methanol at Ambient Temperature

Summary. A simple, rapid, and efficient method is reported for the hydrolysis of a variety of mono- and diesters of aromatic, aliphatic, fatty, and heterocyclic acids with potassium hydroxide in methanol at ambient temperature (35°C).     

Intraoperative contrast-enhanced MR-imaging as predictor of tissue damage during cryoablation of porcine liver

This study evaluate intraoperative Magnetic Resonance Imaging (MRI) as predictor of tissue damage following cryoablation of porcine liver with and without concomitant hepatic vascular inflow occlusion.Inflow occlusion was used during freezing in 6 of 12 pigs included. The volumes of the procedural ice-balls were estimated from MR images. Immediately after thawing contrast (MnDPDP) enhanced MRI was performed to estimate the volume of the cryolesion. Four days after ablation MRI was repeated of the in-vivo and the ex-vivo liver. Photography was performed of the sliced liver specimens to estimate the volumes of the lesions. The intraoperative volume of the cryolesion as shown by contrast enhanced MRI corresponded well to the ice-ball volume for lesions made without vascular occlusion (difference 0.3 +/- 0.9 cm(3), p = 0.239). For lesions made during occlusion the volume of the intraoperative cryolesion was larger than the corresponding ice-ball (difference 7.5 +/- 3.3 cm(3), p = 0.003). The volume of the cryolesions as estimated from histopathology four days after freezing and contrast enhanced MRI immediately after freezing corresponded well for lesions made with (difference -2.6 +/- 4.5 cm(3), p = 0.110) and without vascular occlusion (difference -0.5 +/- 2.3 cm(3), p = 0.695).Intraoperative MnDPDP-enhanced MRI of the cryolesion is predictive of the tissue damage induced during cryoablation of porcine liver. The procedural ice-ball is not, if induced during inflow occlusion.     

Facile reductive coupling of benzylic halides with ferrous oxalate dihydrate

Facile reductive coupling of benzylic halides is reported with ferrous oxalate dihydrate in DMF or HMPA under nitrogen atmosphere at 155-160 degrees C. The coupling is proposed to proceed by two successive oxidative additions of benzylic halides to ferrous oxalate to give an intermediate organoiron complex which undergoes concerted dimerization to give the corresponding reductively coupled dimers in high yields.