Fold‐2‐covering triangular embeddings

For a graph G and a positive integer m, G_(m) is the graph obtained from G by replacing every vertex by an independent set of size m and every edge by m² edges joining all possible new pairs of ends. If G triangulates a surface, then it is easy to see from Euler's formula that G_(m) can, in principle, triangulate a surface. For m prime and at least 7, it has previously been shown that in fact G_(m) does triangulate a surface, and in fact does so as a “covering with folds” of the original triangulation. For m = 5, this would be a consequence of Tutte's 5‐Flow Conjecture. In this work, we investigate the case m = 2 and describe simple classes of triangulations G for which G₍₂₎ does have a triangulation that covers G “with folds,” as well as providing a simple infinite class of triangulations G of the sphere for which G₍₂₎ does not triangulate any surface. © 2003 Wiley Periodicals, Inc. J Graph Theory 43: 79–92, 2003     

Elastic wave scattering around cavities in inhomogeneous continua by the BEM

This work examines elastic wave scattering around cavities embedded in a continuum with depth-dependent shear modulus and under conditions of plane strain. A restricted case of inhomogeneity is considered, where the Poisson ratio is fixed at 0.25 and where the density profile also varies, but proportionally to the shear modulus. For this specific case, the wave speeds remain macroscopically constant and it becomes possible to recover the exact Green functions by using an algebraic transformation method. These functions are subsequently used as kernels in a standard 2D boundary element formulation defined in the Laplace transform domain. The final step involves an inverse Laplace transformation, whereby the transient behavior of cavities in the aforementioned inhomogeneous continuum can be recovered. Two basic examples are solved, namely the circular cylindrical cavity under sudden internal explosion and under a pressure wave sweep. In the latter case, it is possible to investigate the effect that the angle of wave incidence has on the displacement and stress that develop along the cavity's perimeter, given the fact that the shear modulus is changing along the vertical direction. These examples serve to illustrate the present approach and to reveal some interesting differences that are observed in transient wave scattering phenomena between homogeneous and continuously inhomogeneous models, where the latter models yield a more realistic representation of geological formations.     

Hutchinson's shear coefficient for anisotropic beams

Timoshenko's theory of vibrating beams requires a shear correction factor to correctly take into account the effects of shear deformation for different beam cross-sections. This correction is crucial for a precise determination of the shear modulus from the resonant frequencies. Hutchinson's beam theory is used to derive a new shear correction coefficient for anisotropic materials. A comparison is made with other shear coefficients for anisotropic materials published in the literature. Computer-simulated spectra are used to validate the new anisotropic shear correction coefficient.     

The action of an electron beam on dust structures in a plasma

The action of an electron beam on ordered dust structures in glow and low-pressure RF discharges was studied experimentally. The electron beam produces destruction and dynamic displacement of the dust structure. In the center of a dust structure, an electron beam with a low electron energy (tens of eV) at currents up to 1 mA caused structural disordering and “melting” in the region of its action but did not excite external crystal regions. Local action of an electron beam with a high electron energy (25 keV) and a beam current above 10 mA caused deformation of the whole dust structure and shifted it in the horizontal direction so that it was carried away from the RF discharge zone. The effect of dust structure displacements can be used to locally remove particles from a plasma.     

The use of an ultrasonic Doppler velocimeter in turbulent pipe flow

An ultrasonic Doppler velocimeter (UDV) is used for an experimental investigation of turbulent pipe flow at eight different Reynolds numbers (22,300–854,900). The UDV is a multipoint probe in the sense that it takes instantaneous measurements of fluid velocities at different locations simultaneously, with remarkable resolutions in space and time. The performances of the instrument with respect to the properties of the overlap layer of the turbulent flow field are investigated; the experimental results are compared with both already existing and more recently proposed scaling laws, and with other data of experimental nature.     

Karhunen–Loeve representations of turbulent channel flows using the method of snapshots

For three‐dimensional flows with one inhomogeneous spatial coordinate and two periodic directions, the Karhunen–Loeve procedure is typically formulated as a spatial eigenvalue problem. This is normally referred to as the direct method (DM). Here we derive an equivalent formulation in which the eigenvalue problem is formulated in the temporal coordinate. It is shown that this so‐called method of snapshots (MOS) has some numerical advantages when compared to the DM. In particular, the MOS can be formulated purely as a matrix composed of scalars, thus avoiding the need to construct a matrix of matrices as in the DM. In addition, the MOS avoids the need for so‐called weight functions, which emerge in the DM as a result of the non‐uniform grid typically employed in the inhomogeneous direction. The avoidance of such weight functions, which may exhibit singular behaviour, guarantees satisfaction of the boundary conditions. The MOS is applied to data sets recently obtained from the direct simulation of turbulence in a channel in which viscoelasticity is imparted to the fluid using a Giesekus model. The analysis reveals a steep drop in the dimensionality of the turbulence as viscoelasticity is increased. This is consistent with the results that have been obtained with other viscoelastic models, thus revealing an essential generic feature of polymer‐induced drag reduced turbulent flows. Published in 2006 by John Wiley & Sons, Ltd.     

Secondary ion emission from binary Fe-Cr,Fe-Ni,Cr-Ni and ternary Fe-Cr-Ni alloys: Chemical and physical matrix effects

Secondary ion emission from Fe-Cr, Fe-Ni, Cr-Ni binary alloys and Fe-Cr-Ni ternary alloys (concentration range 10–90% of the alloying element) bombarded with 3 keV Xe⁺ ions has been investigated as a function of concentration of the studied element in the multicomponent system. The linear increase of the secondary ion intensity with concentration of the element in the sample was found only for a low-concentration region. There are pronounced nonlinearities in the medium and high-concentration regions. A possible explanation for such nonlinearities based on chemical and physical matrix effects is proposed.     

On a New Non-Geometric Element in Gravity

In this essay a generalized notion of flavor-oscillation clocks is introduced. The generalization contains the element that various superimposed mass eigenstates may have different relative orientation of the component of their spin with respect to the rotational axis of the gravitational source. It is found that these quantum mechanical clocks do not always redshift identically when moved from the gravitational environment of a non-rotating source to the field of a rotating source. The non-geometric contributions to the redshifts may be interpreted as quantum mechanically induced fluctuations over a geometric structure of space-time.     

Phase shift moiré studies of processing-induced residual strains in Nickel 200 spot welds

Processing-induced residual strains in solid cylinders of Nickel 200 were investigated using phase shifting moiré interferometry. Two different experimental approaches were used to study the strains produced during Tungsten-inert gas spot welding. A comparison of results for a ‘hot/fast’ and a ‘cool/slow’ weld demonstrate the capabilities of the general approach. Both experimental methods revealed distinct differences in the residual displacement and strain fields between the two types of welds.