Copolymers containing a spiro orthoester moiety that undergo no shrinkage during cationic crosslinking

A spiro orthoester with an exomethylene group (exoSOE) was radically copolymerized with acrylonitrile or vinyl acetate at several feed ratios to obtain the corresponding copolymers having spiro orthoester moieties in the side chain. The obtained copolymers could be crosslinked via the double ring‐opening polymerization of the spiro orthoester moieties in their side chain by a treatment with BF₃OEt₂. The volume changes upon the crosslinking of the copolymers were evaluated by density measurements with a micromeritics gas pycnometer. The copolymers experienced less than 1% volume expansion instead of volume shrinkage during typical cationic crosslinking, regardless of the copolymer compositions. Negligible shrinkage was observed during the thermal cationic crosslinking of a film cast from a nitrobenzene solution of the copolymers containing a benzylthiophenium salt as a thermally latent cationic initiator. The constantly low volume changes during the crosslinking of the copolymers from exoSOE probably depended on the almost zero volume change during the cationic polymerizations of spiro orthoester derivatives. This indicates that exoSOE is an effective monomer for crosslinkable polymers without volume changes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3666–3673, 2006     

Preparation and properties of isobutylene–isoprene rubber–clay nanocomposites

Isobutylene isoprene rubber (IIR)‐clay nanocomposites have been prepared successfully by melt intercalation with maleic anhydride‐grafted IIR (Ma‐g‐IIR) and organophilic clay. In IIR‐clay nanocomposites, the silicate layers of the clay were exfoliated and dispersed into the monolayer. The nanocomposites exhibited greater gas barrier properties compared with those of Ma‐g‐IIR. When 15 phr clay was added, gas barrier properties were 2.5 times greater than those of Ma‐g‐IIR. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1182–1188, 2006     

Synthesis of copolymers containing a spiro orthocarbonate moiety and evaluation of the volume change during their cationic crosslinking

Spiro orthocarbonate (SOC) monomers having either an exomethylene group {3,3‐dimethyl‐9‐methylene‐1,5,7,11‐tetraoxaspiro[5.5]undecane (ExoSOC)} or an allyl group {9‐allyl‐3,3‐dimethyl‐1,5,7,11‐tetraoxaspiro[5.5]undecane (AllylSOC)} were radically copolymerized with vinyl monomers at several feed ratios to obtain the corresponding copolymers having SOC moieties in the side chain. The obtained copolymers were crosslinked via the double ring‐opening polymerization of the SOC moieties by a treatment with boron trifluoride etherate. The volume changes during the crosslinking of the copolymers were evaluated by density measurements with a gas pycnometer. As the SOC moiety composition increased, the volume shrinkage during the crosslinking was suppressed, and that finally changed into volume expansion. The volume changes during the crosslinking of the copolymers from AllylSOC were slightly larger than those of the copolymers from ExoSOC. The higher volume expansions in the crosslinking of AllylSOC‐based copolymers were ascribable to the lower steric hindrance around the SOC moieties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7040–7053, 2006     

Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.     

Photochemically generated silicon-carbon double-bonded intermediates VIII. Photolysis of phenyldisilane derivatives in the presence of olefins

Photolysis of phenylpentamethyldisilane, 1,1-diphenyltetramethyldisilane and 1-isopropyl-1-phenyltetramethyldisilane in the presence of a wide variety of olefins has been studied. All reactions investigated, with the exception of those with 1-methylcyclohexene and tetramethylethylene, afforded the corresponding 1/1 addition products. Yields of the adducts depended highly on the structure of the olefins used. In the photolysis of phenylpentamethyldisilane in the presence of an equimolar mixture of 1,1- and 1,2-bis(trimethylsilyl)ethene under competitive reaction conditions, the main product was the one arising from the 1,1-isomer. A possible mechanism for the process of addition of olefin to the photochemically generated silicon-carbon double-bonded intermediate (A) is discussed.     

Silicon hydrides and nickel complexes : III. Hydrosilylation of olefins with dichloro[1,2-bis-(dimethylphosphino)-1,2-dicarba-closo-dodecaborane]-nickel(II) as catalyst

The hydrosilylation of olefins catalyzed by nickel(II) chloride complexed with 1,2-bis(dimethylphosphino)-1,2-dicarba-closo-dodecaborane produces terminal and internal adducts in comparable amounts. This unusual feature of the reaction is explained in terms of the electron-accepting nature of the carboranyl group.     

Polymers having stable radicals. II. Synthesis of nitroxyl polymers from 4-methacryloyl derivatives of 1-hydroxy-2,2,6,6-tetramethylpiperidine

Polymers having stable pendant . radicals were synthesized through their precursor polymers by oxidizing them in air or by H₂O₂–Na₂WO₄. Hydrochlorides and sulfates of 4-methacryloylamino- and 4-methacryloyloxy-1-hydroxy-2,2,6,6-tetramethylpiperidines were synthesized as precursor monomers and polymerized by using α,α′-azobisisobutyronitrile under appropriate conditions to precursor polymers of high molecular weight: poly-4-methacryloylamino-/oxy-1-hydroxy-2,2,6,6-tetramethylpiperidinehydrochlorides and sulfates. The precursor polymers were converted to polymers having nitroxyl stable radicals, i.e., poly-4-methacryloylamino-/oxy-2,2,6,6-tetramethylpiperidine-1-oxyls, by oxidation in air or with H₂O₂–Na₂WO₄ without any main-chain scission. The structure of the resultant stable radical polymers was determined by infrared, ultraviolet, and ESR spectroscopy. Based on the results of spectroscopic analysis and Kjeldahl analysis, the transformation from precursors to nitroxyl stable radical polymers was found to be quantitative. Investigations on the applicability of polymeric nitroxyl radicals to oxidation-reduction reactions were attempted by means of polarography; the reduction half-wave potential was found to be ?1.16 V for the mercury pool.     

Post-biotinylation of photocrosslinking by Staudinger-Bertozzi ligation of preinstalled alkylazide tag

Post-biotinylation of the alkyl azide derivative of trifluoromethyl phenyldiazirine (TPD) was elucidated to apply a photoaffinity biotinylation technique. A photo-modified polyvinilidene difluoride (PVDF) membrane was used as a photolabeled component and we introduced biotin by Staudinger-Bertozzi ligation. The 15 pmol amount of biotinylated reagent was still effective for the visualization of cross-linked product on the matrix. The results show the potential utility of alkyl azide carrying TPD derivatives in the application of photoaffinity biotinylation, which could be useful for the ligands with tight structural requirements.     

Syntheses of polyurethanes derived from oximes and their photodegradation

Polyoxime-urethanes have been synthesized from dioximes and diisocyanates, and their structures have been ascertained by elemental analysis and infrared spectroscopy. They can be represented by the general formula: These polymer films were photolyzed by using a high-pressure 100-W mercury lamp, and the rate of decomposition of the N? O bond was determined by use of ultraviolet and infrared spectra, or comparing the photochemical behavior with that of corresponding model compounds. Upon irradiating these polymers in the presence or absence of sensitizers or a hydrogen donor, there were obtained photolyzed polymers of low molecular weight, of which the molecular weights were estimated by observing the viscosity changes. To deduce the mechanism of photodegradation of polyoxime-urethane, photolysis of benzophenone oxime-phenyl urethane was investigated as a model compound.     

New methods and reagents in organic synthesis. 56. Total syntheses of patellamides B and C,cytotoxic cyclic peptides from a tunicate 2. Their real structures have been determined by their syntheses.

The proposed structures of patellamides B and C, cytotoxic lipophilic cyclic peptides from a marine tunicate, have been revised on the basis of the spectral data of their partial hydrolysates, and their revised structures have been synthetically confirmed by the use of diphenyl phosphorazidate(DPPA) and diethyl phosphorocyanidate(DEPC).