CO2 laser Stark spectroscopy of the Coriolis-coupled ν2 and ν5 bands of CD3Br

The ν₂ (CD₃ symmetrical deformation) and ν₅ (CD₃ degenerate deformation) fundamental bands of CD₃Br were studied by 9.4- and 10.4-μm CO₂ laser Stark spectroscopy. Stark resonances originating from 28 and 53 rovibrational transitions of the ν₂ and ν₅ bands, respectively, were assigned for each of the isotopic species, CD₃⁷⁹Br and CD₃⁸¹Br. These two bands were simultaneously analyzed with explicit inclusion of the ν₂-ν₅ Coriolis interaction, yielding precise molecular constants in the ν₂ and ν₅ excited states as well as the Coriolis coupling constant. The molecular constants obtained are consistent between the two isotopic species and are in good agreement with the results of high-resolution infrared studies. The band origins and dipole moments are

     

102.

Photolysis of organopolysilanes. The reaction of photochemically generated methylphenylsilylene with conjugated dienes     

Mitsuo Ishikawa  Ken-Ichi Nakagawa  Ryuichi Enokida  Makoto Kumada 《Journal of organometallic chemistry》1980,201(1):151-163

Photolysis of 2-phenylheptamethyltrisilane (I) in the presence of acyclic and cyclic conjugated dienes has been investigated using both a high-pressure mercury lamp with a quartz filter and a low-pressure mercury lamp with a Vycor filter. Irradiation of I in the presence of 1,3-butadiene, isoprene or 2,3-dimethylbutadiene with a high-pressure mercury lamp gave a product arising from photochemical isomerization of a silacyclopropane derivative and a compound apparently formed by 1,4-silylene addition, along with a 1/1 “ene” adduct of the diene to a photo-rearranged intermediate containing the silicon—carbon double bond. Irradiation of I in the presence of the conjugated diene with a low-pressure mercury lamp, followed by treatment of the product with methanol, afforded a methoxysilane arising from methanolysis of the corresponding silacyclopropane, together with the isomerization product, silacyclopentene and rearranged addition product. Irradiation of I in the presence of cyclopentadiene with a high-pressure mercury lamp produced methylphenylsilylcyclopentadiene, while irradiation of a similar mixture with a low-pressure mercury lamp followed by treatment with methanol gave 4-(methoxymethylphenylsilyl)-1-cyclopentene. With 1,3-cyclooctadiene, the photochemically generated methylphenylsilylene afforded many types of addition product. Photolysis of I in the presence of 1,3-cyclohexadiene, however, afforded none of the silylene addition products.     

103.

The Enantioselective Synthesis of Phomopsin B     

Joshua&#x;S. Grimley  Andrew&#x;M. Sawayama  Hiroko Tanaka  Michelle&#x;M. Stohlmeyer  Thomas&#x;F. Woiwode  Thomas&#x;J. Wandless 《Angewandte Chemie (Weinheim an der Bergstrasse, Germany)》2007,119(43):8305-8307

     

104.

The extractive spectrophotometric determination of palladium(ii) as the mixed-ligand complex with picolinealdehyde-2-hydroxy-5-phenylanil and chloride ion     

Makoto Otomo  Kazunobu Kodama 《Analytica chimica acta》1976

The extraction of palladium(II) with chloroform in the presence of PHPA and chloride ions is described. The extracted species has an absorption maximum at 627 nm, and Beer's law is obeyed over the range 10–200 μg of palladium. The molar absorptivity is 4.90·10³ l mol^?1 cm^?1 at 627 nm. The 1:1:1 Pd(PHPA)-Cl complex is extracted from aqueous solution. The effect of foreign ions on the determination of palladium(II) is examined.     

105.

Syntheses and reactions of functional polymers. XLII. Preparation and use of polymers having N-hydroxy-succinimide unit in the chain     

Masayasu Akiyama  Mitsuaki Narita  Makoto Okawara 《Journal of polymer science. Part A, Polymer chemistry》1969,7(5):1299-1306

Styrene-maleic anhydride alternating copolymer was converted to N-hydroxymaleimide-styrene copolymer by reaction with hydroxylamine in pyridine at room temperature. The conversion was more than 90%. From this copolymer, N-acetoxy- or N-benzoyloxymaleimide-styrene copolymers were derived by action of acetic anhydride or benzoyl chloride in dimethylformamide at room temperature. Acylation of several primary amines was carried out effectively by use of these N-acyloxyimide-styrene copolymers. The reaction of the acetylated copolymer with diethylamine at room temperature afforded N-hydroxyimide copolymer.     

106.

DNA topology on an increase in positive writhing number of DNA: conformation changes in the time course of cis-diamminedichloroplatinum(II)-DNA adducts     

Kobayashi S  Nakamura Y  Maehara T  Hamashima H  Sasatsu M  Asano K  Ohishi Y  Tanaka A 《Chemical & pharmaceutical bulletin》2001,49(9):1053-1060

We show that the topological significance of the gel mobility of cis-diamminedichloroplatinum(II) (DDP)-closed circular DNA (ccDNA) adducts decreases with reaction time, until a point at which it joins relaxed DNA, and that the mobility of the adducts increases again. There is no relationship between the relative length of the adducts and the gel mobility. Although the significance of the decrease of gel mobility is due to the unwinding of cis-DDP-DNA (or trans-DDP-DNA) adducts, the conformational significance of the subsequent increase in mobility is unclear. To elucidate the conformational significance for unwinding of the adducts, we measured the writhing number (Wk) of the adducts using electron microscopy and analyzed the topological states of cis-DDP (or trans-DDP) adducts based on the White rule, Lk=Wk+Tk. Where, Lk and Tk represent the linking and twisting number in the ring, respectively. From the data, we found that the Wk of cis-DDP-ccDNA adducts in comparison with trans-DDP-ccDNA adducts increases from a negative to a positive number with time. This suggests that cis-DDP plays a role in the change of the topological state of ccDNA. In the abstraction of platinum from the adducts with CN- ion, the differences in both topological states may explain why Pt in trans-DDP is abstracted more easily than in cis-DDP. To explain the abstraction of Pt ion, we also discuss the findings based on the thermodynamic cycle in a intermolecular crosslink model Pt(NH3)2(guanine)2(2+)-->Pt(CN)4(2-) using the Pt parametrized PM3 method.     

107.

Polyoxymethylene prepared by γ-ray-induced polymerization of tetraoxymethylene single crystal     

A. Tanaka  S. Uemura  Y. Ishida 《Colloid and polymer science》1971,243(1):3-6

Summary In order to prepare a large single crystal, tetraoxymethylene recrystallized by distilled water adjusted to pH 8 was sealed in an ampoule at a reduced pressure of 1 mm Hg and was crystallized in a furnace with the temperature gradient of 6 °C/cm. The lowering rate of the ampoule was required to be 6 cm/day for preparing the single crystal with 1 cm diameter and to be 3 cm/day for one with 2 cm diameter. The optimum angle at the pointing end of the ampoule, where a seed crystal is formed, was about 40°. The b-axis of the obtained single crystal was parallel to the direction of the crystal growth i. e. the wall of the ampoule. It was polymerized byγ-ray under conditions which prevent the growth of the twin crystal. The obtained polyoxymethylene was porous, because the polymerization yield of 100% could not be attained. However, it was so tough that a specimen for measurements could be cut down by a diamond cutter. Its fiber axis was parallel to the direction of the wall of the ampoule. It did not contain the so-called amorphous regions, although it did contain defects. It was characterized with the extremely high orientation of the polymer chains.

---

Zusammenfassung Zur Pr?parierung gro?er Einkristalle wurde rekristallisiertes Tetraoxymethylen in destilliertem Wasser von p_H 8 in eine Ampulle bei einem reduzierten Quecksilberdruck von 1 mm eingefüllt und in einem Ofen mit einem Temperaturgradienten von 6 °C/cm kristallisiert. Die Abkühlgeschwindigkeit der Ampulle betrug etwa 6 cm/Tag für die Pr?paration eines Einkristalls mit 1 cm ? und 3 cm/Tag für einen solchen mit 2 cm ?. Der optimale Winkel am spitzen Ende der Ampulle, wo der Keimkristall gebildet wird, betrug etwa 40°. Dieb-Achse des Einkristalls war parallel zur Wachstumsrichtung, d. h. zur Wand der Ampulle. Der Kristall wurde durch R?ntgenstrahlen polymerisiert unter Bedingungen, die das Wachsen eines Zwillingskristalls vermeiden. Das erhaltene Polyoxymethylen war por?s, doch konnte eine Polymerisationsausbeute von 100% nicht erhalten werden. Doch war der Einkristall so z?h, da? für Messungen eine Probe mit dem Diamantschneider abgeschnitten werden konnte. Die Faserachse war parallel zur Wandrichtung der Ampulle. Das kristalline Material enthielt keine sogenannten amorphen Bereiche, allerdings Defekte. Es war durch extrem hohe Orientierungen der Polymerketten charakterisiert.

---

---

We are greatly indebted to Dr.Y. Miyake of Mitsui Toatsu Co., Ltd. for providing the tetraoxymethylene. Thanks are to due Dr.M. Nishii of Osaka Laboratories, Japan Association for Radiation Research on Polymer for the radiation polymerization, to Mr.T. Tsukihara for the X-ray measurement, and to Mrs.H. Tanaka for the help with the electron microscopy. We are also grateful to Prof.S. Seki for offering the use of differential scanning calorimeter.     

108.

New hydroxyl protecting groups of a safety-catch type removable by reductive acidolysis.     

Y Kiso  S Tanaka  T Kimura  H Itoh  K Akaji 《Chemical & pharmaceutical bulletin》1991,39(11):3097-3099

New hydroxyl protecting groups of a safety-catch type, i.e., 4-methylsulfinylbenzyl-oxycarbonyl (Msz) group for Tyr and 4-methylsulfinylbenzyl (Msob) ether for Thr, have been developed. O-Msz and O-Msob groups are stable under both acidic and basic conditions and can be removed by a one-pot reaction involving reductive acidolysis using tetrachlorosilane-trifluoroacetic acid (TFA)-scavengers. Using these new protecting groups, a 17 residue-peptide, gamma-endorphin, was successfully synthesized by the efficient solid phase method.     

109.

Cationic polymerization of cyclic olefins     

A. Mizote  T. Tanaka  T. Higashimura  S. Okamura 《Journal of polymer science. Part A, Polymer chemistry》1966,4(4):869-879

The polymerization and the polymerizabilities of indene, benzofuran, and 1,2-dihydronaphthalene are discussed from the point of view of ring strain, ring stabilization, and steric hindrance in the transition state. Monomer reactivities of these olefins were estimated from copolymerization with styrene and from the rate of addition of iodine bromide in acetic acid. Rates and degrees of polymerization are compared with monomer reactivities and resonance energies of indene, 1,2-dihydronaphthalene, and benzofuran as a measure of ring strain and stabilization. It is found that indence is 1.5–2.0 times more reactive than styrene. This high reactivity of indene is attributed to the ring strain in the monomer state and to the low amount of steric hindrance in the transition state of the coplanar five-membered cyclic olefin. 1,2-Dihydronaphthalene is strained and therefore reactive, but propagation to higher molecular weight products is impeded due to the steric hindrance. The reactivity of benzofuran is decreased by conjugative stabilization of C?C double bonds at the reaction site.     

110.

Studies on Fe complexes produced by yeast. IV. Mechanism of Fe transport from an Fe(II)-oligosaccharide complex across the mucosal membrane of the rat intestine     

S Tabata  K Tanaka 《Chemical & pharmaceutical bulletin》1989,37(2):382-387

The mechanism of Fe transport across the rat duodenal membrane from an Fe(II)-oligosaccharide complex (designated B1-c) produced in wine by yeast and showing high hematopoietic activity in rats was examined. The Fe uptake from B1-c by brush border membrane (BBM) vesicles isolated from the rat intestine was based mainly on the Fe binding to membrane components which were suggested to be inside the vesicles. Evidence that Fe was transported into the vesicles by a special transport system other than simple diffusion was obtained by observing saturation kinetics under conditions of isotope exchange, and temperature and pH dependence. This Fe uptake was not inhibited by any metal ions tested, including inorganic Fe(II), and the BBM vesicles from the duodenum had a higher Fe uptake than those from the other parts of the small intestine. Furthermore, the BBM vesicles isolated from rats with Fe deficiency showed a significantly increased Fe uptake. The Km value for B1-c uptake was 0.16 mM, lower than the values for FeSO4 and ferrous ascorbate. These results suggest that a special transport system selective for B1-c may be present on the mucosal membrane. B1-c was taken up by the BBM vesicles in the form of Fe-oligosaccharide complex. From the preloaded vesicles, B1-c was released temperature- and pH-dependently.(ABSTRACT TRUNCATED AT 250 WORDS)     

[首页] « 上一页 [6] [7] [8] [9] [10] 11 [12] [13] [14] [15] [16] 下一页 » 末  页»

		CD379Br		CD381Br
$\text{ν}{}_2$		991.396 82 (18)		991.388 46 (17)		cm?1
$\text{ν}{}_5$		1055.469 00 (12)		1055.466 32 (12)		cm?1
$\text{μ}{}_0$		1.830 42 (52)		1.829 84 (47)		D
$\text{μ}{}_2$		1.829 93 (48)		1.829 57 (46)		D
$\text{μ}{}_5$		1.832 23 (60)		1.831 19 (56)		D

Photolysis of organopolysilanes. The reaction of photochemically generated methylphenylsilylene with conjugated dienes

Photolysis of 2-phenylheptamethyltrisilane (I) in the presence of acyclic and cyclic conjugated dienes has been investigated using both a high-pressure mercury lamp with a quartz filter and a low-pressure mercury lamp with a Vycor filter. Irradiation of I in the presence of 1,3-butadiene, isoprene or 2,3-dimethylbutadiene with a high-pressure mercury lamp gave a product arising from photochemical isomerization of a silacyclopropane derivative and a compound apparently formed by 1,4-silylene addition, along with a 1/1 “ene” adduct of the diene to a photo-rearranged intermediate containing the silicon—carbon double bond. Irradiation of I in the presence of the conjugated diene with a low-pressure mercury lamp, followed by treatment of the product with methanol, afforded a methoxysilane arising from methanolysis of the corresponding silacyclopropane, together with the isomerization product, silacyclopentene and rearranged addition product. Irradiation of I in the presence of cyclopentadiene with a high-pressure mercury lamp produced methylphenylsilylcyclopentadiene, while irradiation of a similar mixture with a low-pressure mercury lamp followed by treatment with methanol gave 4-(methoxymethylphenylsilyl)-1-cyclopentene. With 1,3-cyclooctadiene, the photochemically generated methylphenylsilylene afforded many types of addition product. Photolysis of I in the presence of 1,3-cyclohexadiene, however, afforded none of the silylene addition products.     

The extractive spectrophotometric determination of palladium(ii) as the mixed-ligand complex with picolinealdehyde-2-hydroxy-5-phenylanil and chloride ion

The extraction of palladium(II) with chloroform in the presence of PHPA and chloride ions is described. The extracted species has an absorption maximum at 627 nm, and Beer's law is obeyed over the range 10–200 μg of palladium. The molar absorptivity is 4.90·10³ l mol^?1 cm^?1 at 627 nm. The 1:1:1 Pd(PHPA)-Cl complex is extracted from aqueous solution. The effect of foreign ions on the determination of palladium(II) is examined.     

Syntheses and reactions of functional polymers. XLII. Preparation and use of polymers having N-hydroxy-succinimide unit in the chain

Styrene-maleic anhydride alternating copolymer was converted to N-hydroxymaleimide-styrene copolymer by reaction with hydroxylamine in pyridine at room temperature. The conversion was more than 90%. From this copolymer, N-acetoxy- or N-benzoyloxymaleimide-styrene copolymers were derived by action of acetic anhydride or benzoyl chloride in dimethylformamide at room temperature. Acylation of several primary amines was carried out effectively by use of these N-acyloxyimide-styrene copolymers. The reaction of the acetylated copolymer with diethylamine at room temperature afforded N-hydroxyimide copolymer.     

DNA topology on an increase in positive writhing number of DNA: conformation changes in the time course of cis-diamminedichloroplatinum(II)-DNA adducts

We show that the topological significance of the gel mobility of cis-diamminedichloroplatinum(II) (DDP)-closed circular DNA (ccDNA) adducts decreases with reaction time, until a point at which it joins relaxed DNA, and that the mobility of the adducts increases again. There is no relationship between the relative length of the adducts and the gel mobility. Although the significance of the decrease of gel mobility is due to the unwinding of cis-DDP-DNA (or trans-DDP-DNA) adducts, the conformational significance of the subsequent increase in mobility is unclear. To elucidate the conformational significance for unwinding of the adducts, we measured the writhing number (Wk) of the adducts using electron microscopy and analyzed the topological states of cis-DDP (or trans-DDP) adducts based on the White rule, Lk=Wk+Tk. Where, Lk and Tk represent the linking and twisting number in the ring, respectively. From the data, we found that the Wk of cis-DDP-ccDNA adducts in comparison with trans-DDP-ccDNA adducts increases from a negative to a positive number with time. This suggests that cis-DDP plays a role in the change of the topological state of ccDNA. In the abstraction of platinum from the adducts with CN- ion, the differences in both topological states may explain why Pt in trans-DDP is abstracted more easily than in cis-DDP. To explain the abstraction of Pt ion, we also discuss the findings based on the thermodynamic cycle in a intermolecular crosslink model Pt(NH3)2(guanine)2(2+)-->Pt(CN)4(2-) using the Pt parametrized PM3 method.     

Polyoxymethylene prepared by γ-ray-induced polymerization of tetraoxymethylene single crystal

Summary In order to prepare a large single crystal, tetraoxymethylene recrystallized by distilled water adjusted to pH 8 was sealed in an ampoule at a reduced pressure of 1 mm Hg and was crystallized in a furnace with the temperature gradient of 6 °C/cm. The lowering rate of the ampoule was required to be 6 cm/day for preparing the single crystal with 1 cm diameter and to be 3 cm/day for one with 2 cm diameter. The optimum angle at the pointing end of the ampoule, where a seed crystal is formed, was about 40°. The b-axis of the obtained single crystal was parallel to the direction of the crystal growth i. e. the wall of the ampoule. It was polymerized byγ-ray under conditions which prevent the growth of the twin crystal. The obtained polyoxymethylene was porous, because the polymerization yield of 100% could not be attained. However, it was so tough that a specimen for measurements could be cut down by a diamond cutter. Its fiber axis was parallel to the direction of the wall of the ampoule. It did not contain the so-called amorphous regions, although it did contain defects. It was characterized with the extremely high orientation of the polymer chains.

---

Zusammenfassung Zur Pr?parierung gro?er Einkristalle wurde rekristallisiertes Tetraoxymethylen in destilliertem Wasser von p_H 8 in eine Ampulle bei einem reduzierten Quecksilberdruck von 1 mm eingefüllt und in einem Ofen mit einem Temperaturgradienten von 6 °C/cm kristallisiert. Die Abkühlgeschwindigkeit der Ampulle betrug etwa 6 cm/Tag für die Pr?paration eines Einkristalls mit 1 cm ? und 3 cm/Tag für einen solchen mit 2 cm ?. Der optimale Winkel am spitzen Ende der Ampulle, wo der Keimkristall gebildet wird, betrug etwa 40°. Dieb-Achse des Einkristalls war parallel zur Wachstumsrichtung, d. h. zur Wand der Ampulle. Der Kristall wurde durch R?ntgenstrahlen polymerisiert unter Bedingungen, die das Wachsen eines Zwillingskristalls vermeiden. Das erhaltene Polyoxymethylen war por?s, doch konnte eine Polymerisationsausbeute von 100% nicht erhalten werden. Doch war der Einkristall so z?h, da? für Messungen eine Probe mit dem Diamantschneider abgeschnitten werden konnte. Die Faserachse war parallel zur Wandrichtung der Ampulle. Das kristalline Material enthielt keine sogenannten amorphen Bereiche, allerdings Defekte. Es war durch extrem hohe Orientierungen der Polymerketten charakterisiert.

---

---

We are greatly indebted to Dr.Y. Miyake of Mitsui Toatsu Co., Ltd. for providing the tetraoxymethylene. Thanks are to due Dr.M. Nishii of Osaka Laboratories, Japan Association for Radiation Research on Polymer for the radiation polymerization, to Mr.T. Tsukihara for the X-ray measurement, and to Mrs.H. Tanaka for the help with the electron microscopy. We are also grateful to Prof.S. Seki for offering the use of differential scanning calorimeter.     

New hydroxyl protecting groups of a safety-catch type removable by reductive acidolysis.

New hydroxyl protecting groups of a safety-catch type, i.e., 4-methylsulfinylbenzyl-oxycarbonyl (Msz) group for Tyr and 4-methylsulfinylbenzyl (Msob) ether for Thr, have been developed. O-Msz and O-Msob groups are stable under both acidic and basic conditions and can be removed by a one-pot reaction involving reductive acidolysis using tetrachlorosilane-trifluoroacetic acid (TFA)-scavengers. Using these new protecting groups, a 17 residue-peptide, gamma-endorphin, was successfully synthesized by the efficient solid phase method.     

Cationic polymerization of cyclic olefins

The polymerization and the polymerizabilities of indene, benzofuran, and 1,2-dihydronaphthalene are discussed from the point of view of ring strain, ring stabilization, and steric hindrance in the transition state. Monomer reactivities of these olefins were estimated from copolymerization with styrene and from the rate of addition of iodine bromide in acetic acid. Rates and degrees of polymerization are compared with monomer reactivities and resonance energies of indene, 1,2-dihydronaphthalene, and benzofuran as a measure of ring strain and stabilization. It is found that indence is 1.5–2.0 times more reactive than styrene. This high reactivity of indene is attributed to the ring strain in the monomer state and to the low amount of steric hindrance in the transition state of the coplanar five-membered cyclic olefin. 1,2-Dihydronaphthalene is strained and therefore reactive, but propagation to higher molecular weight products is impeded due to the steric hindrance. The reactivity of benzofuran is decreased by conjugative stabilization of C?C double bonds at the reaction site.     

Studies on Fe complexes produced by yeast. IV. Mechanism of Fe transport from an Fe(II)-oligosaccharide complex across the mucosal membrane of the rat intestine

The mechanism of Fe transport across the rat duodenal membrane from an Fe(II)-oligosaccharide complex (designated B1-c) produced in wine by yeast and showing high hematopoietic activity in rats was examined. The Fe uptake from B1-c by brush border membrane (BBM) vesicles isolated from the rat intestine was based mainly on the Fe binding to membrane components which were suggested to be inside the vesicles. Evidence that Fe was transported into the vesicles by a special transport system other than simple diffusion was obtained by observing saturation kinetics under conditions of isotope exchange, and temperature and pH dependence. This Fe uptake was not inhibited by any metal ions tested, including inorganic Fe(II), and the BBM vesicles from the duodenum had a higher Fe uptake than those from the other parts of the small intestine. Furthermore, the BBM vesicles isolated from rats with Fe deficiency showed a significantly increased Fe uptake. The Km value for B1-c uptake was 0.16 mM, lower than the values for FeSO4 and ferrous ascorbate. These results suggest that a special transport system selective for B1-c may be present on the mucosal membrane. B1-c was taken up by the BBM vesicles in the form of Fe-oligosaccharide complex. From the preloaded vesicles, B1-c was released temperature- and pH-dependently.(ABSTRACT TRUNCATED AT 250 WORDS)