Systematic enantiomeric separation of [60]fullerene bisadducts possessing an inherent chiral addition pattern

The optical resolution of trans-2 and trans-3 [60]fullerene bisadducts with an inherent chiral addition pattern, modified by Bingel reaction, cycloaddition by benzyne, Prato reaction, and cycloaddition by o-quinodimethane, was systematically investigated by using chiral HPLC columns (Chiralcel OD and Chiralpak AD). The chiroptical properties of enantiomers separated were also examined.     

New reactions of 1-alkynes catalyzed by transition metal complexes

Recently discovered catalytic reactions with ruthenium and lanthanide metal complexes have extended the scope of 1-alkynes as useful reagents. The specific formation of aryl-substituted (Z)-1,3-enzymes via the dimerization of HC(triple bond) CR(1) (R(1) = aryl) has been attained using dimeric lanthanide complexes, the catalytic activity of which appears to be unaffected by time. The dimerization of HC(triple bond) CR(2) (R(2) = t-Bu, SiMe(3)) catalyzed by Ru(cod)(cot)/PR(3) or RuH(2)(PPh(3))(3) produces a good yield of butatrienes (Z)R(2)CH=C=C=CHR(2) with a high degree of selectivity. Under certain conditions, HC(triple bond) C=SiMe(3) dimerizes to yield exclusively (Z)-M(3)Si-C(triple bond) C-CH=CH-SiMe(3). The hydration of HC(triple bond)CR(3) (R(3) = alkyl, aryl) catalyzed by RuCl(2)/PR'(3) or CpRuCl(PR"(3))(2) has realized the first example of anti-Markovnikov regioselectivity in an addition reaction of water that produces aldehydes R(3)CH(2)bond;CHO. The application of this reaction to propargylic alcohols has lead to their formal isomerization to alpha,beta-unsaturated aldehydes. In contrast, the addition of amines R(4)bond;NH(2) (R(4) = aryl) to HCtbond;CR(5) (R(5) = alkyl, aryl) conforms to Markovnikov's rule to produce ketimines R(5)bond;(C=NR(4))bond;CH(3) when catalyzed by a Ru(3)(CO)(12)/additive. Since the reaction can be performed in air without the need for any solvents, it enables the practical synthesis of aromatic ketimines, which are difficult to prepare by conventional methods. The synthesis of indoles using deactivated anilines is one practical application of this reaction. The mechanisms of some of these reactions have been analyzed in detail with the aid of theoretical calculations.     

Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

Cobaltporphyrin‐adsorbed carbon black: highly efficient electrocatalysts for oxygen reduction

meso‐Substituted cobalt porphyrins adsorbed on carbon black were prepared as catalysts for the electroreduction of O₂. The catalyst, which was prepared by using a homogenizer in mixing cobalt tetraethylporphyrin and carbon black, gave rise to electroreduction of O₂ at a remarkably positive potential (E_p = 0.45 V versus saturated calomel electrode (SCE)) and showed a high selectively for the four‐electron reduction (n = 3.8). Electrochemical study and extended X‐ray absorption fine structure (EXAFS) analysis revealed that the adsorbed face‐to‐face dimeric aggregates of cobalt porphyrin molecules were highly efficient catalysts for electroreduction of O₂. Copyright © 2005 John Wiley & Sons, Ltd.     

Polymers having stable radicals. II. Synthesis of nitroxyl polymers from 4-methacryloyl derivatives of 1-hydroxy-2,2,6,6-tetramethylpiperidine

Polymers having stable pendant . radicals were synthesized through their precursor polymers by oxidizing them in air or by H₂O₂–Na₂WO₄. Hydrochlorides and sulfates of 4-methacryloylamino- and 4-methacryloyloxy-1-hydroxy-2,2,6,6-tetramethylpiperidines were synthesized as precursor monomers and polymerized by using α,α′-azobisisobutyronitrile under appropriate conditions to precursor polymers of high molecular weight: poly-4-methacryloylamino-/oxy-1-hydroxy-2,2,6,6-tetramethylpiperidinehydrochlorides and sulfates. The precursor polymers were converted to polymers having nitroxyl stable radicals, i.e., poly-4-methacryloylamino-/oxy-2,2,6,6-tetramethylpiperidine-1-oxyls, by oxidation in air or with H₂O₂–Na₂WO₄ without any main-chain scission. The structure of the resultant stable radical polymers was determined by infrared, ultraviolet, and ESR spectroscopy. Based on the results of spectroscopic analysis and Kjeldahl analysis, the transformation from precursors to nitroxyl stable radical polymers was found to be quantitative. Investigations on the applicability of polymeric nitroxyl radicals to oxidation-reduction reactions were attempted by means of polarography; the reduction half-wave potential was found to be ?1.16 V for the mercury pool.     

Stereospecific polymerization of isobutyl vinyl ether catalyzed by calcined iron sulfate

The polymerization of isobutyl vinyl ether was studied in a heterogeneous system using iron (II) sulfate calcined in air at various temperatures as a catalyst. The maximum activity was shown by the catalyst calcined at 700°C, which effected the polymerization at room temperature in a few seconds, while the sulfate treated at 750°C was totally inactive. Poly(vinyl ethyl ether) was also obtained by the FeSO₄ (700°C) catalyst at room temperature. This catalyst formed the crystalline polymer (melting temperature 135–138°C) when the reaction was performed in toluene as solvent at room temperature. Poisoning experiments with Hammett indicators were carried out with the FeSO₄ (700°C) catalyst. The treatment with n-butylamine rendered it inactive in the reaction of isobutyl vinyl ether, while its catalytic activity was little affected by dicinnamalacetone. On the basis of the observed results, the nature of active sites of catalyst is discussed.     

PtBr2-catalyzed consecutive enyne metathesis-aromatization of 1-(1-methoxy-but-3-enyl)-2-(1-alkynyl)benzenes: dual role of the Pt catalyst

1,7-Enynes 1, connected through an aromatic ring and bearing a leaving methoxy group at the 4-position, underwent the PtBr(2)-catalyzed enyne metathesis followed by aromatization in one pot to afford vinyl naphthalenes 3 in good to acceptable yields. The cyclobutene intermediate 11a and another intermediate 2a were isolated, indicating that PtBr(2) acts as a dual role catalyst: (1) as a transition metal catalyst, it induces the enyne metathesis to produce 11a starting from 1a, and (2) as a Lewis acid catalyst, it facilitates elimination of MeOH from 2a to give the aromatized product 3a.     

Electron attachment and vibrational excitation in hydrogen iodide: calculations based on the nonlocal resonance model

High resolution laser spectroscopy has been applied to study the hyperfine structure of excited energy levels of Thulium I. As part of our aim to complete the fine and hyperfine structure of the Tm I spectra 51 transitions in the visible were measured and precise values for the magnetic dipole hyperfine structure constants A of 24 odd and 19 even levels were determined. In addition, a new energy level of even parity with J = 3/2 is found at 27 509.40 (5)cm^?1 using laser induced fluorescence spectroscopy.     

Analysis of the interaction between human plasma fibronectin and gelatin by affinity electrophoresis

The interaction between human plasma fibronectin and gelatin was analyzed by affinity electrophoresis, in which the fibronectin was subjected to electrophoresis in a 4% polyacrylamide gel in the presence and absence of gelatin, as an affinity ligand, and the fibronectin band was stained by an immunoblotting method. The apparent dissociation constants (Kd) of fibronectin for gelatin were calculated from affinity plots based on the original affinity equation at different pHs, urea concentrations, and temperatures. The fibronectin exhibited much lower affinity in the presence of urea. The Kds at 37 degrees C were 1.49 X 10(-7) M, 2.50 X 10(-6) M, and 3.58 X 10(-6) M with 2 M, 3 M, and 4 M urea, respectively. The van't Hoff plots of Kd values against absolute temperature (T) showed that the value of log Kd decreased in proportion to the increase in the value of 1/T within the range of 15-50 degrees C. The standard enthalpy, the standard free energy change at 37 degrees C, and the entropy change at 37 degrees C for association were calculated to be -124.7 kJ/mol, -33.23 kJ/mol, and -295.1 J/mol/deg, respectively. These results suggest that a hydrophilic interaction, such as hydrogen bond or van der Waals interaction, plays an important role in the binding of plasma fibronectin to gelatin.     

Measurement of hyperfine structure constants,g values and tensor polarizability of excited states of Sm I

Atomic-beam laser spectroscopy with fluorescence detection is applied to investigate the hyperfine structure (hfs), Stark and Zeeman effects of the electric dipole transitions of Sm i. The measurements are performed for the four transitions of 0 → 15650.55, 292.58 → 15650.55, 292.58 → 15567.32, and 1489.55 → 16890.59 cm^-1. The hfs constants of the upper and lower levels and the isotope shifts of the transitions are determined. The tensor polarizability of the 15650.55 cm^-1 level is found to be α₂ = -556.2 ± 11.8 kHz/(kV/cm)². Thanks to the accurate g values of the lower levels [Childs, W.J., Goodman, L.S.: Phys. Rev. A 6, 2011 (1972)], the g values of the upper levels are obtained from the observed Zeeman splittings. The values are found to be -0.115907(79), 2.22259(20) and 1.599968(51) for the 15650.55 cm^-1 .1, 15567.32 cm^-1 and 16890.59.cm^-1 levels, respectively.